Enabling on-board intel graphics while stil using dedicated graphic card












0















I have Radeon RX 550 graphic card ASRock Z370 PRO4 motherboard with on-board intel graphics and linux mint 18.2 and I'm trying to get both dedicated and on-board graphics working at the same time.



I have enabled IGPU Multi-Monitor in BIOS.



The integrated graphics is detected by the OS but shows as UNCLAIMED, I do not get any signal on HDMI port and Display program does not detect the attached display.



sudo lshw -C video



  *-display               
description: VGA compatible controller
product: Baffin [Radeon RX 550 640SP / RX 560/560X]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: cf
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=amdgpu latency=0
resources: irq:127 memory:c0000000-cfffffff memory:d0000000-d01fffff ioport:e000(size=256) memory:df000000-df03ffff memory:c0000-dffff
*-display UNCLAIMED
description: Display controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm bus_master cap_list
configuration: latency=0
resources: memory:de000000-deffffff memory:b0000000-bfffffff ioport:f000(size=64)


sudo lspci -nnvvvv



...
00:02.0 Display controller [0380]: Intel Corporation Device [8086:3e92]
Subsystem: ASRock Incorporation Device [1849:3e92]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] #1b
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] #13
Kernel modules: i915
...
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 550 640SP / RX 560/560X] [1002:67ff] (rev cf) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:8a91]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at df000000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L0s <64ns, L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee002b8 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP+ BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [200 v1] #15
Capabilities: [270 v1] #19
Capabilities: [2b0 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [2c0 v1] #13
Capabilities: [2d0 v1] #1b
Capabilities: [320 v1] Latency Tolerance Reporting
Max snoop latency: 71680ns
Max no snoop latency: 71680ns
Capabilities: [328 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [370 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=0us PortTPowerOnTime=170us
Kernel driver in use: amdgpu
Kernel modules: amdgpu


Following some advice on the internet I tried to create xorg.conf but without effect



Section "ServerLayout"      
Identifier "Layout0"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
EndSection

Section "Monitor"
Identifier "Monitor0"
EndSection

Section "Monitor"
Identifier "Monitor1"
EndSection

Section "Device"
Identifier "Device0"
Driver "amdgpu"
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "Device1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
EndSection


/var/log/Xorg.0.log - loading Intel driver



[    16.351] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 16.351] X Protocol Version 11, Revision 0
[ 16.351] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[ 16.351] Current Operating System: Linux agrzes-desktop 4.13.0-39-generic #44~16.04.1-Ubuntu SMP Thu Apr 5 16:43:10 UTC 2018 x86_64
[ 16.351] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-39-generic root=UUID=60626327-5d73-48cd-ba79-0f94b318e6c8 ro quiet splash radeon.audio=1 vt.handoff=7
[ 16.351] Build Date: 24 November 2017 09:44:25AM
[ 16.351] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support)
[ 16.351] Current version of pixman: 0.33.6
[ 16.351] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.351] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.351] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 2 23:34:46 2018
[ 16.351] (==) Using config file: "/etc/X11/xorg.conf"
[ 16.351] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.352] (==) ServerLayout "Layout0"
[ 16.352] (**) |-->Screen "Screen0" (0)
[ 16.352] (**) | |-->Monitor "Monitor0"
[ 16.352] (**) | |-->Device "Device0"
[ 16.352] (**) |-->Screen "Screen1" (1)
[ 16.352] (**) | |-->Monitor "Monitor1"
[ 16.352] (**) | |-->Device "Device1"
[ 16.352] (==) Automatically adding devices
[ 16.352] (==) Automatically enabling devices
[ 16.352] (==) Automatically adding GPU devices
[ 16.352] (==) Automatically binding GPU devices
[ 16.352] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 16.352] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 16.352] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 16.352] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.352] (II) Loader magic: 0x5641ee40ce00
[ 16.352] (II) Module ABI versions:
[ 16.352] X.Org ANSI C Emulation: 0.4
[ 16.352] X.Org Video Driver: 23.0
[ 16.352] X.Org XInput driver : 24.1
[ 16.352] X.Org Server Extension : 10.0
[ 16.352] (++) using VT number 8

[ 16.352] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 16.353] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.358] (--) PCI: (0:0:2:0) 8086:3e92:1849:3e92 rev 0, Mem @ 0xde000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 16.358] (--) PCI:*(0:1:0:0) 1002:67ff:1462:8a91 rev 207, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdf000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 16.358] (II) LoadModule: "glx"
[ 16.358] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.363] (II) Module glx: vendor="X.Org Foundation"
[ 16.363] compiled for 1.19.5, module version = 1.0.0
[ 16.363] ABI class: X.Org Server Extension, version 10.0
[ 16.363] (II) LoadModule: "amdgpu"
[ 16.363] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 16.367] (II) Module amdgpu: vendor="X.Org Foundation"
[ 16.367] compiled for 1.19.5, module version = 1.4.0
[ 16.367] Module class: X.Org Video Driver
[ 16.367] ABI class: X.Org Video Driver, version 23.0
[ 16.367] (II) LoadModule: "intel"
[ 16.367] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.370] (II) Module intel: vendor="X.Org Foundation"
[ 16.370] compiled for 1.19.3, module version = 2.99.917
[ 16.370] Module class: X.Org Video Driver
[ 16.370] ABI class: X.Org Video Driver, version 23.0
[ 16.370] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 16.370] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 16.370] (II) intel: Driver for Intel(R) HD Graphics
[ 16.370] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 16.370] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 16.495] (II) [KMS] Kernel modesetting enabled.
[ 18.514] intel: waited 2020 ms for i915.ko driver to load
[ 18.516] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32


What else can I do to enable the on-board graphics?










share|improve this question

























  • Do you have the necessary X drivers/kernel drivers installed? What does /var/log/Xorg.0.log say when you try to start X with this xorg.conf? Any errors?

    – dirkt
    May 2 '18 at 8:31











  • I see no errors in /var/log/Xorg.0.log. It appears that intel driver is loaded. But still not available. The on-board graphics works during boot along dedicated card but after system is loaded it is no longer working.

    – AGrzes
    May 2 '18 at 21:10











  • You cut the log at the interesting part: Any messages from the intel X driver about initializing screens etc. after that? If no, my guess would be there's something wrong with the kernel driver, or a version conflict between X driver and kernel driver.

    – dirkt
    May 3 '18 at 4:05











  • I added more log - no thing from Intel driver after that. Is there any way to increase logging level to gain more insight?

    – AGrzes
    May 3 '18 at 5:33











  • Updating kernek to 4.15 or putting i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT improved the situation. The card is now detected but display is struck on image of dots (Mint load screen)

    – AGrzes
    May 3 '18 at 10:23
















0















I have Radeon RX 550 graphic card ASRock Z370 PRO4 motherboard with on-board intel graphics and linux mint 18.2 and I'm trying to get both dedicated and on-board graphics working at the same time.



I have enabled IGPU Multi-Monitor in BIOS.



The integrated graphics is detected by the OS but shows as UNCLAIMED, I do not get any signal on HDMI port and Display program does not detect the attached display.



sudo lshw -C video



  *-display               
description: VGA compatible controller
product: Baffin [Radeon RX 550 640SP / RX 560/560X]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: cf
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=amdgpu latency=0
resources: irq:127 memory:c0000000-cfffffff memory:d0000000-d01fffff ioport:e000(size=256) memory:df000000-df03ffff memory:c0000-dffff
*-display UNCLAIMED
description: Display controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm bus_master cap_list
configuration: latency=0
resources: memory:de000000-deffffff memory:b0000000-bfffffff ioport:f000(size=64)


sudo lspci -nnvvvv



...
00:02.0 Display controller [0380]: Intel Corporation Device [8086:3e92]
Subsystem: ASRock Incorporation Device [1849:3e92]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] #1b
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] #13
Kernel modules: i915
...
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 550 640SP / RX 560/560X] [1002:67ff] (rev cf) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:8a91]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at df000000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L0s <64ns, L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee002b8 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP+ BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [200 v1] #15
Capabilities: [270 v1] #19
Capabilities: [2b0 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [2c0 v1] #13
Capabilities: [2d0 v1] #1b
Capabilities: [320 v1] Latency Tolerance Reporting
Max snoop latency: 71680ns
Max no snoop latency: 71680ns
Capabilities: [328 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [370 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=0us PortTPowerOnTime=170us
Kernel driver in use: amdgpu
Kernel modules: amdgpu


Following some advice on the internet I tried to create xorg.conf but without effect



Section "ServerLayout"      
Identifier "Layout0"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
EndSection

Section "Monitor"
Identifier "Monitor0"
EndSection

Section "Monitor"
Identifier "Monitor1"
EndSection

Section "Device"
Identifier "Device0"
Driver "amdgpu"
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "Device1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
EndSection


/var/log/Xorg.0.log - loading Intel driver



[    16.351] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 16.351] X Protocol Version 11, Revision 0
[ 16.351] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[ 16.351] Current Operating System: Linux agrzes-desktop 4.13.0-39-generic #44~16.04.1-Ubuntu SMP Thu Apr 5 16:43:10 UTC 2018 x86_64
[ 16.351] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-39-generic root=UUID=60626327-5d73-48cd-ba79-0f94b318e6c8 ro quiet splash radeon.audio=1 vt.handoff=7
[ 16.351] Build Date: 24 November 2017 09:44:25AM
[ 16.351] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support)
[ 16.351] Current version of pixman: 0.33.6
[ 16.351] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.351] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.351] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 2 23:34:46 2018
[ 16.351] (==) Using config file: "/etc/X11/xorg.conf"
[ 16.351] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.352] (==) ServerLayout "Layout0"
[ 16.352] (**) |-->Screen "Screen0" (0)
[ 16.352] (**) | |-->Monitor "Monitor0"
[ 16.352] (**) | |-->Device "Device0"
[ 16.352] (**) |-->Screen "Screen1" (1)
[ 16.352] (**) | |-->Monitor "Monitor1"
[ 16.352] (**) | |-->Device "Device1"
[ 16.352] (==) Automatically adding devices
[ 16.352] (==) Automatically enabling devices
[ 16.352] (==) Automatically adding GPU devices
[ 16.352] (==) Automatically binding GPU devices
[ 16.352] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 16.352] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 16.352] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 16.352] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.352] (II) Loader magic: 0x5641ee40ce00
[ 16.352] (II) Module ABI versions:
[ 16.352] X.Org ANSI C Emulation: 0.4
[ 16.352] X.Org Video Driver: 23.0
[ 16.352] X.Org XInput driver : 24.1
[ 16.352] X.Org Server Extension : 10.0
[ 16.352] (++) using VT number 8

[ 16.352] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 16.353] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.358] (--) PCI: (0:0:2:0) 8086:3e92:1849:3e92 rev 0, Mem @ 0xde000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 16.358] (--) PCI:*(0:1:0:0) 1002:67ff:1462:8a91 rev 207, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdf000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 16.358] (II) LoadModule: "glx"
[ 16.358] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.363] (II) Module glx: vendor="X.Org Foundation"
[ 16.363] compiled for 1.19.5, module version = 1.0.0
[ 16.363] ABI class: X.Org Server Extension, version 10.0
[ 16.363] (II) LoadModule: "amdgpu"
[ 16.363] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 16.367] (II) Module amdgpu: vendor="X.Org Foundation"
[ 16.367] compiled for 1.19.5, module version = 1.4.0
[ 16.367] Module class: X.Org Video Driver
[ 16.367] ABI class: X.Org Video Driver, version 23.0
[ 16.367] (II) LoadModule: "intel"
[ 16.367] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.370] (II) Module intel: vendor="X.Org Foundation"
[ 16.370] compiled for 1.19.3, module version = 2.99.917
[ 16.370] Module class: X.Org Video Driver
[ 16.370] ABI class: X.Org Video Driver, version 23.0
[ 16.370] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 16.370] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 16.370] (II) intel: Driver for Intel(R) HD Graphics
[ 16.370] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 16.370] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 16.495] (II) [KMS] Kernel modesetting enabled.
[ 18.514] intel: waited 2020 ms for i915.ko driver to load
[ 18.516] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32


What else can I do to enable the on-board graphics?










share|improve this question

























  • Do you have the necessary X drivers/kernel drivers installed? What does /var/log/Xorg.0.log say when you try to start X with this xorg.conf? Any errors?

    – dirkt
    May 2 '18 at 8:31











  • I see no errors in /var/log/Xorg.0.log. It appears that intel driver is loaded. But still not available. The on-board graphics works during boot along dedicated card but after system is loaded it is no longer working.

    – AGrzes
    May 2 '18 at 21:10











  • You cut the log at the interesting part: Any messages from the intel X driver about initializing screens etc. after that? If no, my guess would be there's something wrong with the kernel driver, or a version conflict between X driver and kernel driver.

    – dirkt
    May 3 '18 at 4:05











  • I added more log - no thing from Intel driver after that. Is there any way to increase logging level to gain more insight?

    – AGrzes
    May 3 '18 at 5:33











  • Updating kernek to 4.15 or putting i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT improved the situation. The card is now detected but display is struck on image of dots (Mint load screen)

    – AGrzes
    May 3 '18 at 10:23














0












0








0


0






I have Radeon RX 550 graphic card ASRock Z370 PRO4 motherboard with on-board intel graphics and linux mint 18.2 and I'm trying to get both dedicated and on-board graphics working at the same time.



I have enabled IGPU Multi-Monitor in BIOS.



The integrated graphics is detected by the OS but shows as UNCLAIMED, I do not get any signal on HDMI port and Display program does not detect the attached display.



sudo lshw -C video



  *-display               
description: VGA compatible controller
product: Baffin [Radeon RX 550 640SP / RX 560/560X]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: cf
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=amdgpu latency=0
resources: irq:127 memory:c0000000-cfffffff memory:d0000000-d01fffff ioport:e000(size=256) memory:df000000-df03ffff memory:c0000-dffff
*-display UNCLAIMED
description: Display controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm bus_master cap_list
configuration: latency=0
resources: memory:de000000-deffffff memory:b0000000-bfffffff ioport:f000(size=64)


sudo lspci -nnvvvv



...
00:02.0 Display controller [0380]: Intel Corporation Device [8086:3e92]
Subsystem: ASRock Incorporation Device [1849:3e92]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] #1b
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] #13
Kernel modules: i915
...
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 550 640SP / RX 560/560X] [1002:67ff] (rev cf) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:8a91]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at df000000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L0s <64ns, L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee002b8 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP+ BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [200 v1] #15
Capabilities: [270 v1] #19
Capabilities: [2b0 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [2c0 v1] #13
Capabilities: [2d0 v1] #1b
Capabilities: [320 v1] Latency Tolerance Reporting
Max snoop latency: 71680ns
Max no snoop latency: 71680ns
Capabilities: [328 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [370 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=0us PortTPowerOnTime=170us
Kernel driver in use: amdgpu
Kernel modules: amdgpu


Following some advice on the internet I tried to create xorg.conf but without effect



Section "ServerLayout"      
Identifier "Layout0"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
EndSection

Section "Monitor"
Identifier "Monitor0"
EndSection

Section "Monitor"
Identifier "Monitor1"
EndSection

Section "Device"
Identifier "Device0"
Driver "amdgpu"
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "Device1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
EndSection


/var/log/Xorg.0.log - loading Intel driver



[    16.351] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 16.351] X Protocol Version 11, Revision 0
[ 16.351] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[ 16.351] Current Operating System: Linux agrzes-desktop 4.13.0-39-generic #44~16.04.1-Ubuntu SMP Thu Apr 5 16:43:10 UTC 2018 x86_64
[ 16.351] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-39-generic root=UUID=60626327-5d73-48cd-ba79-0f94b318e6c8 ro quiet splash radeon.audio=1 vt.handoff=7
[ 16.351] Build Date: 24 November 2017 09:44:25AM
[ 16.351] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support)
[ 16.351] Current version of pixman: 0.33.6
[ 16.351] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.351] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.351] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 2 23:34:46 2018
[ 16.351] (==) Using config file: "/etc/X11/xorg.conf"
[ 16.351] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.352] (==) ServerLayout "Layout0"
[ 16.352] (**) |-->Screen "Screen0" (0)
[ 16.352] (**) | |-->Monitor "Monitor0"
[ 16.352] (**) | |-->Device "Device0"
[ 16.352] (**) |-->Screen "Screen1" (1)
[ 16.352] (**) | |-->Monitor "Monitor1"
[ 16.352] (**) | |-->Device "Device1"
[ 16.352] (==) Automatically adding devices
[ 16.352] (==) Automatically enabling devices
[ 16.352] (==) Automatically adding GPU devices
[ 16.352] (==) Automatically binding GPU devices
[ 16.352] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 16.352] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 16.352] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 16.352] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.352] (II) Loader magic: 0x5641ee40ce00
[ 16.352] (II) Module ABI versions:
[ 16.352] X.Org ANSI C Emulation: 0.4
[ 16.352] X.Org Video Driver: 23.0
[ 16.352] X.Org XInput driver : 24.1
[ 16.352] X.Org Server Extension : 10.0
[ 16.352] (++) using VT number 8

[ 16.352] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 16.353] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.358] (--) PCI: (0:0:2:0) 8086:3e92:1849:3e92 rev 0, Mem @ 0xde000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 16.358] (--) PCI:*(0:1:0:0) 1002:67ff:1462:8a91 rev 207, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdf000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 16.358] (II) LoadModule: "glx"
[ 16.358] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.363] (II) Module glx: vendor="X.Org Foundation"
[ 16.363] compiled for 1.19.5, module version = 1.0.0
[ 16.363] ABI class: X.Org Server Extension, version 10.0
[ 16.363] (II) LoadModule: "amdgpu"
[ 16.363] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 16.367] (II) Module amdgpu: vendor="X.Org Foundation"
[ 16.367] compiled for 1.19.5, module version = 1.4.0
[ 16.367] Module class: X.Org Video Driver
[ 16.367] ABI class: X.Org Video Driver, version 23.0
[ 16.367] (II) LoadModule: "intel"
[ 16.367] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.370] (II) Module intel: vendor="X.Org Foundation"
[ 16.370] compiled for 1.19.3, module version = 2.99.917
[ 16.370] Module class: X.Org Video Driver
[ 16.370] ABI class: X.Org Video Driver, version 23.0
[ 16.370] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 16.370] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 16.370] (II) intel: Driver for Intel(R) HD Graphics
[ 16.370] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 16.370] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 16.495] (II) [KMS] Kernel modesetting enabled.
[ 18.514] intel: waited 2020 ms for i915.ko driver to load
[ 18.516] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32


What else can I do to enable the on-board graphics?










share|improve this question
















I have Radeon RX 550 graphic card ASRock Z370 PRO4 motherboard with on-board intel graphics and linux mint 18.2 and I'm trying to get both dedicated and on-board graphics working at the same time.



I have enabled IGPU Multi-Monitor in BIOS.



The integrated graphics is detected by the OS but shows as UNCLAIMED, I do not get any signal on HDMI port and Display program does not detect the attached display.



sudo lshw -C video



  *-display               
description: VGA compatible controller
product: Baffin [Radeon RX 550 640SP / RX 560/560X]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 0
bus info: pci@0000:01:00.0
version: cf
width: 64 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=amdgpu latency=0
resources: irq:127 memory:c0000000-cfffffff memory:d0000000-d01fffff ioport:e000(size=256) memory:df000000-df03ffff memory:c0000-dffff
*-display UNCLAIMED
description: Display controller
product: Intel Corporation
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 64 bits
clock: 33MHz
capabilities: pciexpress msi pm bus_master cap_list
configuration: latency=0
resources: memory:de000000-deffffff memory:b0000000-bfffffff ioport:f000(size=64)


sudo lspci -nnvvvv



...
00:02.0 Display controller [0380]: Intel Corporation Device [8086:3e92]
Subsystem: ASRock Incorporation Device [1849:3e92]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Capabilities: [40] Vendor Specific Information: Len=0c <?>
Capabilities: [70] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag- RBE+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] #1b
Capabilities: [200 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [300 v1] #13
Kernel modules: i915
...
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 550 640SP / RX 560/560X] [1002:67ff] (rev cf) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. [MSI] Device [1462:8a91]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 127
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at e000 [size=256]
Region 5: Memory at df000000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [48] Vendor Specific Information: Len=08 <?>
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L0s <64ns, L1 <1us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR+, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Disabled
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee002b8 Data: 0000
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP+ BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [200 v1] #15
Capabilities: [270 v1] #19
Capabilities: [2b0 v1] Address Translation Service (ATS)
ATSCap: Invalidate Queue Depth: 00
ATSCtl: Enable-, Smallest Translation Unit: 00
Capabilities: [2c0 v1] #13
Capabilities: [2d0 v1] #1b
Capabilities: [320 v1] Latency Tolerance Reporting
Max snoop latency: 71680ns
Max no snoop latency: 71680ns
Capabilities: [328 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 1
ARICtl: MFVC- ACS-, Function Group: 0
Capabilities: [370 v1] L1 PM Substates
L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
PortCommonModeRestoreTime=0us PortTPowerOnTime=170us
Kernel driver in use: amdgpu
Kernel modules: amdgpu


Following some advice on the internet I tried to create xorg.conf but without effect



Section "ServerLayout"      
Identifier "Layout0"
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
EndSection

Section "Monitor"
Identifier "Monitor0"
EndSection

Section "Monitor"
Identifier "Monitor1"
EndSection

Section "Device"
Identifier "Device0"
Driver "amdgpu"
BusID "PCI:1:0:0"
EndSection

Section "Device"
Identifier "Device1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
EndSection


/var/log/Xorg.0.log - loading Intel driver



[    16.351] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[ 16.351] X Protocol Version 11, Revision 0
[ 16.351] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[ 16.351] Current Operating System: Linux agrzes-desktop 4.13.0-39-generic #44~16.04.1-Ubuntu SMP Thu Apr 5 16:43:10 UTC 2018 x86_64
[ 16.351] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-39-generic root=UUID=60626327-5d73-48cd-ba79-0f94b318e6c8 ro quiet splash radeon.audio=1 vt.handoff=7
[ 16.351] Build Date: 24 November 2017 09:44:25AM
[ 16.351] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support)
[ 16.351] Current version of pixman: 0.33.6
[ 16.351] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.351] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.351] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 2 23:34:46 2018
[ 16.351] (==) Using config file: "/etc/X11/xorg.conf"
[ 16.351] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.352] (==) ServerLayout "Layout0"
[ 16.352] (**) |-->Screen "Screen0" (0)
[ 16.352] (**) | |-->Monitor "Monitor0"
[ 16.352] (**) | |-->Device "Device0"
[ 16.352] (**) |-->Screen "Screen1" (1)
[ 16.352] (**) | |-->Monitor "Monitor1"
[ 16.352] (**) | |-->Device "Device1"
[ 16.352] (==) Automatically adding devices
[ 16.352] (==) Automatically enabling devices
[ 16.352] (==) Automatically adding GPU devices
[ 16.352] (==) Automatically binding GPU devices
[ 16.352] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 16.352] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 16.352] Entry deleted from font path.
[ 16.352] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 16.352] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 16.352] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.352] (II) Loader magic: 0x5641ee40ce00
[ 16.352] (II) Module ABI versions:
[ 16.352] X.Org ANSI C Emulation: 0.4
[ 16.352] X.Org Video Driver: 23.0
[ 16.352] X.Org XInput driver : 24.1
[ 16.352] X.Org Server Extension : 10.0
[ 16.352] (++) using VT number 8

[ 16.352] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 16.353] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.358] (--) PCI: (0:0:2:0) 8086:3e92:1849:3e92 rev 0, Mem @ 0xde000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64
[ 16.358] (--) PCI:*(0:1:0:0) 1002:67ff:1462:8a91 rev 207, Mem @ 0xc0000000/268435456, 0xd0000000/2097152, 0xdf000000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 16.358] (II) LoadModule: "glx"
[ 16.358] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.363] (II) Module glx: vendor="X.Org Foundation"
[ 16.363] compiled for 1.19.5, module version = 1.0.0
[ 16.363] ABI class: X.Org Server Extension, version 10.0
[ 16.363] (II) LoadModule: "amdgpu"
[ 16.363] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[ 16.367] (II) Module amdgpu: vendor="X.Org Foundation"
[ 16.367] compiled for 1.19.5, module version = 1.4.0
[ 16.367] Module class: X.Org Video Driver
[ 16.367] ABI class: X.Org Video Driver, version 23.0
[ 16.367] (II) LoadModule: "intel"
[ 16.367] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.370] (II) Module intel: vendor="X.Org Foundation"
[ 16.370] compiled for 1.19.3, module version = 2.99.917
[ 16.370] Module class: X.Org Video Driver
[ 16.370] ABI class: X.Org Video Driver, version 23.0
[ 16.370] (II) AMDGPU: Driver for AMD Radeon:
All GPUs supported by the amdgpu kernel driver
[ 16.370] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 16.370] (II) intel: Driver for Intel(R) HD Graphics
[ 16.370] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 16.370] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 16.495] (II) [KMS] Kernel modesetting enabled.
[ 18.514] intel: waited 2020 ms for i915.ko driver to load
[ 18.516] (II) AMDGPU(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32


What else can I do to enable the on-board graphics?







linux-mint hardware intel-graphics






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited May 3 '18 at 5:32







AGrzes

















asked May 2 '18 at 5:55









AGrzesAGrzes

13616




13616













  • Do you have the necessary X drivers/kernel drivers installed? What does /var/log/Xorg.0.log say when you try to start X with this xorg.conf? Any errors?

    – dirkt
    May 2 '18 at 8:31











  • I see no errors in /var/log/Xorg.0.log. It appears that intel driver is loaded. But still not available. The on-board graphics works during boot along dedicated card but after system is loaded it is no longer working.

    – AGrzes
    May 2 '18 at 21:10











  • You cut the log at the interesting part: Any messages from the intel X driver about initializing screens etc. after that? If no, my guess would be there's something wrong with the kernel driver, or a version conflict between X driver and kernel driver.

    – dirkt
    May 3 '18 at 4:05











  • I added more log - no thing from Intel driver after that. Is there any way to increase logging level to gain more insight?

    – AGrzes
    May 3 '18 at 5:33











  • Updating kernek to 4.15 or putting i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT improved the situation. The card is now detected but display is struck on image of dots (Mint load screen)

    – AGrzes
    May 3 '18 at 10:23



















  • Do you have the necessary X drivers/kernel drivers installed? What does /var/log/Xorg.0.log say when you try to start X with this xorg.conf? Any errors?

    – dirkt
    May 2 '18 at 8:31











  • I see no errors in /var/log/Xorg.0.log. It appears that intel driver is loaded. But still not available. The on-board graphics works during boot along dedicated card but after system is loaded it is no longer working.

    – AGrzes
    May 2 '18 at 21:10











  • You cut the log at the interesting part: Any messages from the intel X driver about initializing screens etc. after that? If no, my guess would be there's something wrong with the kernel driver, or a version conflict between X driver and kernel driver.

    – dirkt
    May 3 '18 at 4:05











  • I added more log - no thing from Intel driver after that. Is there any way to increase logging level to gain more insight?

    – AGrzes
    May 3 '18 at 5:33











  • Updating kernek to 4.15 or putting i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT improved the situation. The card is now detected but display is struck on image of dots (Mint load screen)

    – AGrzes
    May 3 '18 at 10:23

















Do you have the necessary X drivers/kernel drivers installed? What does /var/log/Xorg.0.log say when you try to start X with this xorg.conf? Any errors?

– dirkt
May 2 '18 at 8:31





Do you have the necessary X drivers/kernel drivers installed? What does /var/log/Xorg.0.log say when you try to start X with this xorg.conf? Any errors?

– dirkt
May 2 '18 at 8:31













I see no errors in /var/log/Xorg.0.log. It appears that intel driver is loaded. But still not available. The on-board graphics works during boot along dedicated card but after system is loaded it is no longer working.

– AGrzes
May 2 '18 at 21:10





I see no errors in /var/log/Xorg.0.log. It appears that intel driver is loaded. But still not available. The on-board graphics works during boot along dedicated card but after system is loaded it is no longer working.

– AGrzes
May 2 '18 at 21:10













You cut the log at the interesting part: Any messages from the intel X driver about initializing screens etc. after that? If no, my guess would be there's something wrong with the kernel driver, or a version conflict between X driver and kernel driver.

– dirkt
May 3 '18 at 4:05





You cut the log at the interesting part: Any messages from the intel X driver about initializing screens etc. after that? If no, my guess would be there's something wrong with the kernel driver, or a version conflict between X driver and kernel driver.

– dirkt
May 3 '18 at 4:05













I added more log - no thing from Intel driver after that. Is there any way to increase logging level to gain more insight?

– AGrzes
May 3 '18 at 5:33





I added more log - no thing from Intel driver after that. Is there any way to increase logging level to gain more insight?

– AGrzes
May 3 '18 at 5:33













Updating kernek to 4.15 or putting i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT improved the situation. The card is now detected but display is struck on image of dots (Mint load screen)

– AGrzes
May 3 '18 at 10:23





Updating kernek to 4.15 or putting i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT improved the situation. The card is now detected but display is struck on image of dots (Mint load screen)

– AGrzes
May 3 '18 at 10:23










1 Answer
1






active

oldest

votes


















0














I managed to get the setup working so I'm posting it here in case somebody faces similar problem.



First - to get any reaction from the card i needed to set option i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT. After that the on-board card was now working correctly but at least it displayed something, sound through HDMI worked and it was showing up in Display utility.



Next I found out that the alpha_support flag is not needed in more recent kernels - so after update to 4.15 I had the same situation but without need for additional boot options.



Then I found some advice to get rid of xserver-xorg-video-intel driver. After that both graphic cards are working correctly.






share|improve this answer























    Your Answer








    StackExchange.ready(function() {
    var channelOptions = {
    tags: "".split(" "),
    id: "106"
    };
    initTagRenderer("".split(" "), "".split(" "), channelOptions);

    StackExchange.using("externalEditor", function() {
    // Have to fire editor after snippets, if snippets enabled
    if (StackExchange.settings.snippets.snippetsEnabled) {
    StackExchange.using("snippets", function() {
    createEditor();
    });
    }
    else {
    createEditor();
    }
    });

    function createEditor() {
    StackExchange.prepareEditor({
    heartbeatType: 'answer',
    autoActivateHeartbeat: false,
    convertImagesToLinks: false,
    noModals: true,
    showLowRepImageUploadWarning: true,
    reputationToPostImages: null,
    bindNavPrevention: true,
    postfix: "",
    imageUploader: {
    brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
    contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
    allowUrls: true
    },
    onDemand: true,
    discardSelector: ".discard-answer"
    ,immediatelyShowMarkdownHelp:true
    });


    }
    });














    draft saved

    draft discarded


















    StackExchange.ready(
    function () {
    StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f441220%2fenabling-on-board-intel-graphics-while-stil-using-dedicated-graphic-card%23new-answer', 'question_page');
    }
    );

    Post as a guest















    Required, but never shown

























    1 Answer
    1






    active

    oldest

    votes








    1 Answer
    1






    active

    oldest

    votes









    active

    oldest

    votes






    active

    oldest

    votes









    0














    I managed to get the setup working so I'm posting it here in case somebody faces similar problem.



    First - to get any reaction from the card i needed to set option i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT. After that the on-board card was now working correctly but at least it displayed something, sound through HDMI worked and it was showing up in Display utility.



    Next I found out that the alpha_support flag is not needed in more recent kernels - so after update to 4.15 I had the same situation but without need for additional boot options.



    Then I found some advice to get rid of xserver-xorg-video-intel driver. After that both graphic cards are working correctly.






    share|improve this answer




























      0














      I managed to get the setup working so I'm posting it here in case somebody faces similar problem.



      First - to get any reaction from the card i needed to set option i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT. After that the on-board card was now working correctly but at least it displayed something, sound through HDMI worked and it was showing up in Display utility.



      Next I found out that the alpha_support flag is not needed in more recent kernels - so after update to 4.15 I had the same situation but without need for additional boot options.



      Then I found some advice to get rid of xserver-xorg-video-intel driver. After that both graphic cards are working correctly.






      share|improve this answer


























        0












        0








        0







        I managed to get the setup working so I'm posting it here in case somebody faces similar problem.



        First - to get any reaction from the card i needed to set option i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT. After that the on-board card was now working correctly but at least it displayed something, sound through HDMI worked and it was showing up in Display utility.



        Next I found out that the alpha_support flag is not needed in more recent kernels - so after update to 4.15 I had the same situation but without need for additional boot options.



        Then I found some advice to get rid of xserver-xorg-video-intel driver. After that both graphic cards are working correctly.






        share|improve this answer













        I managed to get the setup working so I'm posting it here in case somebody faces similar problem.



        First - to get any reaction from the card i needed to set option i915.alpha_support=1 in GRUB_CMDLINE_LINUX_DEFAULT. After that the on-board card was now working correctly but at least it displayed something, sound through HDMI worked and it was showing up in Display utility.



        Next I found out that the alpha_support flag is not needed in more recent kernels - so after update to 4.15 I had the same situation but without need for additional boot options.



        Then I found some advice to get rid of xserver-xorg-video-intel driver. After that both graphic cards are working correctly.







        share|improve this answer












        share|improve this answer



        share|improve this answer










        answered May 3 '18 at 17:15









        AGrzesAGrzes

        13616




        13616






























            draft saved

            draft discarded




















































            Thanks for contributing an answer to Unix & Linux Stack Exchange!


            • Please be sure to answer the question. Provide details and share your research!

            But avoid



            • Asking for help, clarification, or responding to other answers.

            • Making statements based on opinion; back them up with references or personal experience.


            To learn more, see our tips on writing great answers.




            draft saved


            draft discarded














            StackExchange.ready(
            function () {
            StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f441220%2fenabling-on-board-intel-graphics-while-stil-using-dedicated-graphic-card%23new-answer', 'question_page');
            }
            );

            Post as a guest















            Required, but never shown





















































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown

































            Required, but never shown














            Required, but never shown












            Required, but never shown







            Required, but never shown







            Popular posts from this blog

            How to reconfigure Docker Trusted Registry 2.x.x to use CEPH FS mount instead of NFS and other traditional...

            is 'sed' thread safe

            How to make a Squid Proxy server?