Intel RAID client : “Mark as Normal” for RAID1 member - what's the significance of that?
Summary
RAID client software help text doesn't cover RAID 1 for failed disk status.
Situation
I am using a two disk RAID 1 array on Windows 10 Pro.
The RAID client software reports one of the two disks in the array as "Status: Failed" with an option on the problem disk to "Mark As Normal".
Problem
The accompanying help text says :
This action displays when a disk is reported as failed in a storage system.
This occurs when a disk has failed to complete read and write operations in a timely manner, and data may be lost.
We recommend that you replace the failed disk as soon as possible to return the overall storage system to normal. In this state, data may be lost, but you can try marking the disk as normal and attempt a data recovery. If the disk operations continue to fail, the disk will return to a failed state immediately.
That all seems pretty clear but then the last paragraph reads :
If the failed disk is an array disk, refer to the Troubleshooting section for guidelines on rebuilding a failed or degraded volume.
The "Troubleshooting section" has information about "Failed Volumes" for RAID 0 ; RAID 5 and RAID 10 but nothing about RAID 1 .
Question
What's the significance of using the "Mark as Normal" for a RAID 1 disk in these circumstances ?
The RAID client software has no identification other than a window title of "Intel Rapid Storage Technology"
Help Text Screen Dumps
In response to a comment about the contents of the array related help text here are some screen dumps showing the text (NB: I am using RAID 1 but nothing in the help text mentions RAID 1) .
Screen Dump - part 1
Screen Dump - part 2
Screen Dump - part 3
Screen Dump - part 4
windows raid windows-10
migrated from serverfault.com Jan 11 at 1:04
This question came from our site for system and network administrators.
add a comment |
Summary
RAID client software help text doesn't cover RAID 1 for failed disk status.
Situation
I am using a two disk RAID 1 array on Windows 10 Pro.
The RAID client software reports one of the two disks in the array as "Status: Failed" with an option on the problem disk to "Mark As Normal".
Problem
The accompanying help text says :
This action displays when a disk is reported as failed in a storage system.
This occurs when a disk has failed to complete read and write operations in a timely manner, and data may be lost.
We recommend that you replace the failed disk as soon as possible to return the overall storage system to normal. In this state, data may be lost, but you can try marking the disk as normal and attempt a data recovery. If the disk operations continue to fail, the disk will return to a failed state immediately.
That all seems pretty clear but then the last paragraph reads :
If the failed disk is an array disk, refer to the Troubleshooting section for guidelines on rebuilding a failed or degraded volume.
The "Troubleshooting section" has information about "Failed Volumes" for RAID 0 ; RAID 5 and RAID 10 but nothing about RAID 1 .
Question
What's the significance of using the "Mark as Normal" for a RAID 1 disk in these circumstances ?
The RAID client software has no identification other than a window title of "Intel Rapid Storage Technology"
Help Text Screen Dumps
In response to a comment about the contents of the array related help text here are some screen dumps showing the text (NB: I am using RAID 1 but nothing in the help text mentions RAID 1) .
Screen Dump - part 1
Screen Dump - part 2
Screen Dump - part 3
Screen Dump - part 4
windows raid windows-10
migrated from serverfault.com Jan 11 at 1:04
This question came from our site for system and network administrators.
You are positive your using RAID 1? Odd it would talk about RAID 0 when RAID 0 doesn’t have any fault tolerance
– Ramhound
Jan 11 at 1:29
Thanks for your response. Yes in the help text if you click thorough the contents tree to "Troubleshooting|Failed Volumes" there are three sub-headings : RAID 0 ; RAID 5; and RAID 10. In a moment I will add screen dumps to the question.
– glaucon
Jan 11 at 1:50
add a comment |
Summary
RAID client software help text doesn't cover RAID 1 for failed disk status.
Situation
I am using a two disk RAID 1 array on Windows 10 Pro.
The RAID client software reports one of the two disks in the array as "Status: Failed" with an option on the problem disk to "Mark As Normal".
Problem
The accompanying help text says :
This action displays when a disk is reported as failed in a storage system.
This occurs when a disk has failed to complete read and write operations in a timely manner, and data may be lost.
We recommend that you replace the failed disk as soon as possible to return the overall storage system to normal. In this state, data may be lost, but you can try marking the disk as normal and attempt a data recovery. If the disk operations continue to fail, the disk will return to a failed state immediately.
That all seems pretty clear but then the last paragraph reads :
If the failed disk is an array disk, refer to the Troubleshooting section for guidelines on rebuilding a failed or degraded volume.
The "Troubleshooting section" has information about "Failed Volumes" for RAID 0 ; RAID 5 and RAID 10 but nothing about RAID 1 .
Question
What's the significance of using the "Mark as Normal" for a RAID 1 disk in these circumstances ?
The RAID client software has no identification other than a window title of "Intel Rapid Storage Technology"
Help Text Screen Dumps
In response to a comment about the contents of the array related help text here are some screen dumps showing the text (NB: I am using RAID 1 but nothing in the help text mentions RAID 1) .
Screen Dump - part 1
Screen Dump - part 2
Screen Dump - part 3
Screen Dump - part 4
windows raid windows-10
Summary
RAID client software help text doesn't cover RAID 1 for failed disk status.
Situation
I am using a two disk RAID 1 array on Windows 10 Pro.
The RAID client software reports one of the two disks in the array as "Status: Failed" with an option on the problem disk to "Mark As Normal".
Problem
The accompanying help text says :
This action displays when a disk is reported as failed in a storage system.
This occurs when a disk has failed to complete read and write operations in a timely manner, and data may be lost.
We recommend that you replace the failed disk as soon as possible to return the overall storage system to normal. In this state, data may be lost, but you can try marking the disk as normal and attempt a data recovery. If the disk operations continue to fail, the disk will return to a failed state immediately.
That all seems pretty clear but then the last paragraph reads :
If the failed disk is an array disk, refer to the Troubleshooting section for guidelines on rebuilding a failed or degraded volume.
The "Troubleshooting section" has information about "Failed Volumes" for RAID 0 ; RAID 5 and RAID 10 but nothing about RAID 1 .
Question
What's the significance of using the "Mark as Normal" for a RAID 1 disk in these circumstances ?
The RAID client software has no identification other than a window title of "Intel Rapid Storage Technology"
Help Text Screen Dumps
In response to a comment about the contents of the array related help text here are some screen dumps showing the text (NB: I am using RAID 1 but nothing in the help text mentions RAID 1) .
Screen Dump - part 1
Screen Dump - part 2
Screen Dump - part 3
Screen Dump - part 4
windows raid windows-10
windows raid windows-10
edited Jan 11 at 2:00
glaucon
asked Jan 11 at 0:07
glauconglaucon
188212
188212
migrated from serverfault.com Jan 11 at 1:04
This question came from our site for system and network administrators.
migrated from serverfault.com Jan 11 at 1:04
This question came from our site for system and network administrators.
You are positive your using RAID 1? Odd it would talk about RAID 0 when RAID 0 doesn’t have any fault tolerance
– Ramhound
Jan 11 at 1:29
Thanks for your response. Yes in the help text if you click thorough the contents tree to "Troubleshooting|Failed Volumes" there are three sub-headings : RAID 0 ; RAID 5; and RAID 10. In a moment I will add screen dumps to the question.
– glaucon
Jan 11 at 1:50
add a comment |
You are positive your using RAID 1? Odd it would talk about RAID 0 when RAID 0 doesn’t have any fault tolerance
– Ramhound
Jan 11 at 1:29
Thanks for your response. Yes in the help text if you click thorough the contents tree to "Troubleshooting|Failed Volumes" there are three sub-headings : RAID 0 ; RAID 5; and RAID 10. In a moment I will add screen dumps to the question.
– glaucon
Jan 11 at 1:50
You are positive your using RAID 1? Odd it would talk about RAID 0 when RAID 0 doesn’t have any fault tolerance
– Ramhound
Jan 11 at 1:29
You are positive your using RAID 1? Odd it would talk about RAID 0 when RAID 0 doesn’t have any fault tolerance
– Ramhound
Jan 11 at 1:29
Thanks for your response. Yes in the help text if you click thorough the contents tree to "Troubleshooting|Failed Volumes" there are three sub-headings : RAID 0 ; RAID 5; and RAID 10. In a moment I will add screen dumps to the question.
– glaucon
Jan 11 at 1:50
Thanks for your response. Yes in the help text if you click thorough the contents tree to "Troubleshooting|Failed Volumes" there are three sub-headings : RAID 0 ; RAID 5; and RAID 10. In a moment I will add screen dumps to the question.
– glaucon
Jan 11 at 1:50
add a comment |
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1392987%2fintel-raid-client-mark-as-normal-for-raid1-member-whats-the-significance%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1392987%2fintel-raid-client-mark-as-normal-for-raid1-member-whats-the-significance%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
You are positive your using RAID 1? Odd it would talk about RAID 0 when RAID 0 doesn’t have any fault tolerance
– Ramhound
Jan 11 at 1:29
Thanks for your response. Yes in the help text if you click thorough the contents tree to "Troubleshooting|Failed Volumes" there are three sub-headings : RAID 0 ; RAID 5; and RAID 10. In a moment I will add screen dumps to the question.
– glaucon
Jan 11 at 1:50