Ytdyklly

I'm on OSX 10.9.2 using a Samsung SA850 Display connected to the display port of my MBP 15" Late 2012 Model.

All seems fine, but there is a problem with audio. Generally, whenever the display goes to sleep and wakes up again, my audio stops working. I found out that this is because the display has an integrated audio device, so for some reason this seems to mess with my system settings. I have no idea why.

This is kind of a clueless approach, but perhaps anyone knows how I can just totally stop OSX from even considering my display as an audio output device?

Make the sound icon visible in the menu bar (at the bottom of the Sound system preferences window), then hold Alt ⌥ and click it to view all possible outputs. Sometimes the actual Output window in system preferences doesn't actually display all available options.

Same problem with Sierra and a Dell P2715Q, here. It seems like a display with no audio shouldn't trigger this, but ¯_(ツ)_/¯

With the display connected and no headphones, I used the Sound preferences to change the output to Internal Speakers. Now, at least for this user, the MacBook understands that I never want the sound output routed to DisplayPort.

I suppose you could turn the sound off on your monitor using the buttons. You could also just use a connector like vga or dvi to get rid of sound output.

You could try muting it in Audio MIDI Setup?:

I havn't had a Mac for quite a while now, but I'm pretty sure you can't.
I think somehow it must be possible to deactivate the proper kernel device that's responsible for sound over HDMI/DisplayPort but it's hard to say how easy this can be accomplished, how that will corrupt functionality or how easy it will be to reverse.
Someone should confirm this but I think you could get a cheap usb sound card, which would allow you to completely ignore the internal soundcard, thus only showing you devices connected to the usb card. Or maybe a software solution, something like AudioMate for example could do the trick.

UPDATE: NOT WORKING. SEE COMMENT BELOW

But I would suggest you do the following: It's kind of a strange solution but it'll work and pretty much everyone has the know-how to do it.

1. Take a look at the pin assignments of DisplayPort
   


2. Get yourself a spare DisplayPort cable


3. Cut it in the middle and solder all the pins back together, avoiding
   the pins connecting audio. (These should be pin 15-17)


4. Use the cable to connect your display


5. 
   

   Be happy!

   
   
   

   Pin 1   ML_Lane 0 (p)   Lane 0 (positive)   
   
   Pin 2   GND Ground  
   
   Pin 3   ML_Lane 0 (n)   Lane 0 (negative)   
   
   Pin 4   ML_Lane 1 (p)   Lane 1 (positive)   
   
   Pin 5   GND Ground  
   
   Pin 6   ML_Lane 1 (n)   Lane 1 (negative)   
   
   Pin 7   ML_Lane 2 (p)   Lane 2 (positive)   
   
   Pin 8   GND Ground  
   
   Pin 9   ML_Lane 2 (n)   Lane 2 (negative)   
   
   Pin 10  ML_Lane 3 (p)   Lane 3 (positive)   
   
   Pin 11  GND Ground  
   
   Pin 12  ML_Lane 3 (n)   Lane 3 (negative)   
   
   Pin 13  CONFIG1 connected to Ground1)   
   
   Pin 14  CONFIG2 connected to Ground1)   
   
   Pin 15  AUX CH (p)  Auxiliary Channel (positive)    
   
   Pin 16  GND Ground  
   
   Pin 17  AUX CH (n)  Auxiliary Channel (negative)    
   
   Pin 18  Hot Plug    Hot Plug Detect 
   
   Pin 19  Return  Return for Power    
   
   Pin 20  DP_PWR  Power for connector (3.3 V 500 mA)