Unable to read SD cards linux












0














I'm unable to read any SD card from Linux. I already tried both SD cards that I have here in different machines (windows and Linux) and they work flawlessly, I also booted from a live USB (the same kernel and distro I have installed) and they also work, so it must be something in my current Kali Linux install that is causing this.



First of all, these are the logs I receive when inserting the SD card:



Jan  4 22:41:42 matrix kernel: [ 2028.923668] mmc0: card lacks mandatory switch function, performance might suffer
Jan 4 22:41:42 matrix kernel: [ 2028.923685] mmc0: new SD card at address aaaa
Jan 4 22:41:42 matrix kernel: [ 2028.924358] mmcblk0: mmc0:aaaa DSC16 256 MiB (ro)
Jan 4 22:41:42 matrix kernel: [ 2029.006966] mmcblk0: p1
Jan 4 22:41:42 matrix kernel: [ 2029.006980] mmcblk0: p1 size 31108096 extends beyond EOD, truncated
Jan 4 22:41:43 matrix kernel: [ 2029.611115] print_req_error: I/O error, dev mmcblk0, sector 524672
Jan 4 22:41:43 matrix kernel: [ 2029.746877] print_req_error: I/O error, dev mmcblk0, sector 524673
Jan 4 22:41:43 matrix kernel: [ 2029.882571] print_req_error: I/O error, dev mmcblk0, sector 524674
Jan 4 22:41:43 matrix kernel: [ 2030.017980] print_req_error: I/O error, dev mmcblk0, sector 524675
Jan 4 22:41:43 matrix kernel: [ 2030.153261] print_req_error: I/O error, dev mmcblk0, sector 524676
Jan 4 22:41:44 matrix kernel: [ 2030.288366] print_req_error: I/O error, dev mmcblk0, sector 524677
Jan 4 22:41:44 matrix kernel: [ 2030.424021] print_req_error: I/O error, dev mmcblk0, sector 524678
Jan 4 22:41:44 matrix kernel: [ 2030.559682] print_req_error: I/O error, dev mmcblk0, sector 524679
Jan 4 22:41:44 matrix kernel: [ 2030.966821] print_req_error: I/O error, dev mmcblk0, sector 524672
Jan 4 22:41:44 matrix kernel: [ 2031.101915] print_req_error: I/O error, dev mmcblk0, sector 524673
Jan 4 22:41:45 matrix kernel: [ 2031.913602] Buffer I/O error on dev mmcblk0, logical block 65584, async page read
Jan 4 22:41:48 matrix kernel: [ 2034.631681] print_req_error: 21 callbacks suppressed
Jan 4 22:41:48 matrix kernel: [ 2034.631686] print_req_error: I/O error, dev mmcblk0, sector 524679
Jan 4 22:41:48 matrix kernel: [ 2034.631701] Buffer I/O error on dev mmcblk0p1, logical block 64560, async page read


This is my the output of lspci -v, more specifically, the SD card reader:



02:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) (prog-if 01)
Subsystem: Lenovo SD/MMC Card Reader Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e1301000 (32-bit, non-prefetchable) [size=4K]
Memory at e1300000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci


output of lsmod | grep mmc



mmc_block              45056  0
mmc_core 172032 4 sdhci,cqhci,mmc_block,sdhci_pci


dmesg boot output related to the mmc:



[    1.271406] mmc0: Unknown controller version (3). You may experience problems.
[ 1.271639] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA


This is my kernel:



Linux matrix 4.18.0-kali2-amd64 #1 SMP Debian 4.18.10-2kali1 (2018-10-09) x86_64 GNU/Linux


Things that I already tried:




  • Disable and enable sdhci with modprobe

  • Change debug_quirk value of shdci_pci (options sdhci debug_quirks=0x40)










share|improve this question









New contributor




Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
















  • 3




    Possible duplicate of Why is Kali Linux so hard to set up? Why won't people help me?
    – RalfFriedl
    2 days ago










  • are you saying that the SD cards worked on other machines, but they do not work on yours? ..... maybe you have a hardware issue
    – jsotola
    yesterday










  • This is not a hardware issue since I can boot the same distro/kernel linux via liveUSB and read the SD cards with no problem.
    – Jean Novak
    yesterday










  • @RalfFriedl, Thank you for pointing out my lack of knowledge. I understand Kali linux is not a "newbie" distro but since I'm working in the netsec field, I tought about giving Kali a try as my daily OS and not only as specialized liveUSB distro. I'm no new to linux, I believe the point of the forum is to share knowledge and using your external point of view of the problem to advice a future solution. Thanks anyway, I read the post you linked and its a fair point.
    – Jean Novak
    yesterday










  • Hi @A.B, thanks for your reply. Does not matter which sd card I insert, this output is shown everytime. If I try to read the same SD card in other computer, it works fine. If I boot my computer from a live USB and try reading the SD card again, it works as well.
    – Jean Novak
    yesterday
















0














I'm unable to read any SD card from Linux. I already tried both SD cards that I have here in different machines (windows and Linux) and they work flawlessly, I also booted from a live USB (the same kernel and distro I have installed) and they also work, so it must be something in my current Kali Linux install that is causing this.



First of all, these are the logs I receive when inserting the SD card:



Jan  4 22:41:42 matrix kernel: [ 2028.923668] mmc0: card lacks mandatory switch function, performance might suffer
Jan 4 22:41:42 matrix kernel: [ 2028.923685] mmc0: new SD card at address aaaa
Jan 4 22:41:42 matrix kernel: [ 2028.924358] mmcblk0: mmc0:aaaa DSC16 256 MiB (ro)
Jan 4 22:41:42 matrix kernel: [ 2029.006966] mmcblk0: p1
Jan 4 22:41:42 matrix kernel: [ 2029.006980] mmcblk0: p1 size 31108096 extends beyond EOD, truncated
Jan 4 22:41:43 matrix kernel: [ 2029.611115] print_req_error: I/O error, dev mmcblk0, sector 524672
Jan 4 22:41:43 matrix kernel: [ 2029.746877] print_req_error: I/O error, dev mmcblk0, sector 524673
Jan 4 22:41:43 matrix kernel: [ 2029.882571] print_req_error: I/O error, dev mmcblk0, sector 524674
Jan 4 22:41:43 matrix kernel: [ 2030.017980] print_req_error: I/O error, dev mmcblk0, sector 524675
Jan 4 22:41:43 matrix kernel: [ 2030.153261] print_req_error: I/O error, dev mmcblk0, sector 524676
Jan 4 22:41:44 matrix kernel: [ 2030.288366] print_req_error: I/O error, dev mmcblk0, sector 524677
Jan 4 22:41:44 matrix kernel: [ 2030.424021] print_req_error: I/O error, dev mmcblk0, sector 524678
Jan 4 22:41:44 matrix kernel: [ 2030.559682] print_req_error: I/O error, dev mmcblk0, sector 524679
Jan 4 22:41:44 matrix kernel: [ 2030.966821] print_req_error: I/O error, dev mmcblk0, sector 524672
Jan 4 22:41:44 matrix kernel: [ 2031.101915] print_req_error: I/O error, dev mmcblk0, sector 524673
Jan 4 22:41:45 matrix kernel: [ 2031.913602] Buffer I/O error on dev mmcblk0, logical block 65584, async page read
Jan 4 22:41:48 matrix kernel: [ 2034.631681] print_req_error: 21 callbacks suppressed
Jan 4 22:41:48 matrix kernel: [ 2034.631686] print_req_error: I/O error, dev mmcblk0, sector 524679
Jan 4 22:41:48 matrix kernel: [ 2034.631701] Buffer I/O error on dev mmcblk0p1, logical block 64560, async page read


This is my the output of lspci -v, more specifically, the SD card reader:



02:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) (prog-if 01)
Subsystem: Lenovo SD/MMC Card Reader Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e1301000 (32-bit, non-prefetchable) [size=4K]
Memory at e1300000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci


output of lsmod | grep mmc



mmc_block              45056  0
mmc_core 172032 4 sdhci,cqhci,mmc_block,sdhci_pci


dmesg boot output related to the mmc:



[    1.271406] mmc0: Unknown controller version (3). You may experience problems.
[ 1.271639] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA


This is my kernel:



Linux matrix 4.18.0-kali2-amd64 #1 SMP Debian 4.18.10-2kali1 (2018-10-09) x86_64 GNU/Linux


Things that I already tried:




  • Disable and enable sdhci with modprobe

  • Change debug_quirk value of shdci_pci (options sdhci debug_quirks=0x40)










share|improve this question









New contributor




Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
















  • 3




    Possible duplicate of Why is Kali Linux so hard to set up? Why won't people help me?
    – RalfFriedl
    2 days ago










  • are you saying that the SD cards worked on other machines, but they do not work on yours? ..... maybe you have a hardware issue
    – jsotola
    yesterday










  • This is not a hardware issue since I can boot the same distro/kernel linux via liveUSB and read the SD cards with no problem.
    – Jean Novak
    yesterday










  • @RalfFriedl, Thank you for pointing out my lack of knowledge. I understand Kali linux is not a "newbie" distro but since I'm working in the netsec field, I tought about giving Kali a try as my daily OS and not only as specialized liveUSB distro. I'm no new to linux, I believe the point of the forum is to share knowledge and using your external point of view of the problem to advice a future solution. Thanks anyway, I read the post you linked and its a fair point.
    – Jean Novak
    yesterday










  • Hi @A.B, thanks for your reply. Does not matter which sd card I insert, this output is shown everytime. If I try to read the same SD card in other computer, it works fine. If I boot my computer from a live USB and try reading the SD card again, it works as well.
    – Jean Novak
    yesterday














0












0








0







I'm unable to read any SD card from Linux. I already tried both SD cards that I have here in different machines (windows and Linux) and they work flawlessly, I also booted from a live USB (the same kernel and distro I have installed) and they also work, so it must be something in my current Kali Linux install that is causing this.



First of all, these are the logs I receive when inserting the SD card:



Jan  4 22:41:42 matrix kernel: [ 2028.923668] mmc0: card lacks mandatory switch function, performance might suffer
Jan 4 22:41:42 matrix kernel: [ 2028.923685] mmc0: new SD card at address aaaa
Jan 4 22:41:42 matrix kernel: [ 2028.924358] mmcblk0: mmc0:aaaa DSC16 256 MiB (ro)
Jan 4 22:41:42 matrix kernel: [ 2029.006966] mmcblk0: p1
Jan 4 22:41:42 matrix kernel: [ 2029.006980] mmcblk0: p1 size 31108096 extends beyond EOD, truncated
Jan 4 22:41:43 matrix kernel: [ 2029.611115] print_req_error: I/O error, dev mmcblk0, sector 524672
Jan 4 22:41:43 matrix kernel: [ 2029.746877] print_req_error: I/O error, dev mmcblk0, sector 524673
Jan 4 22:41:43 matrix kernel: [ 2029.882571] print_req_error: I/O error, dev mmcblk0, sector 524674
Jan 4 22:41:43 matrix kernel: [ 2030.017980] print_req_error: I/O error, dev mmcblk0, sector 524675
Jan 4 22:41:43 matrix kernel: [ 2030.153261] print_req_error: I/O error, dev mmcblk0, sector 524676
Jan 4 22:41:44 matrix kernel: [ 2030.288366] print_req_error: I/O error, dev mmcblk0, sector 524677
Jan 4 22:41:44 matrix kernel: [ 2030.424021] print_req_error: I/O error, dev mmcblk0, sector 524678
Jan 4 22:41:44 matrix kernel: [ 2030.559682] print_req_error: I/O error, dev mmcblk0, sector 524679
Jan 4 22:41:44 matrix kernel: [ 2030.966821] print_req_error: I/O error, dev mmcblk0, sector 524672
Jan 4 22:41:44 matrix kernel: [ 2031.101915] print_req_error: I/O error, dev mmcblk0, sector 524673
Jan 4 22:41:45 matrix kernel: [ 2031.913602] Buffer I/O error on dev mmcblk0, logical block 65584, async page read
Jan 4 22:41:48 matrix kernel: [ 2034.631681] print_req_error: 21 callbacks suppressed
Jan 4 22:41:48 matrix kernel: [ 2034.631686] print_req_error: I/O error, dev mmcblk0, sector 524679
Jan 4 22:41:48 matrix kernel: [ 2034.631701] Buffer I/O error on dev mmcblk0p1, logical block 64560, async page read


This is my the output of lspci -v, more specifically, the SD card reader:



02:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) (prog-if 01)
Subsystem: Lenovo SD/MMC Card Reader Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e1301000 (32-bit, non-prefetchable) [size=4K]
Memory at e1300000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci


output of lsmod | grep mmc



mmc_block              45056  0
mmc_core 172032 4 sdhci,cqhci,mmc_block,sdhci_pci


dmesg boot output related to the mmc:



[    1.271406] mmc0: Unknown controller version (3). You may experience problems.
[ 1.271639] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA


This is my kernel:



Linux matrix 4.18.0-kali2-amd64 #1 SMP Debian 4.18.10-2kali1 (2018-10-09) x86_64 GNU/Linux


Things that I already tried:




  • Disable and enable sdhci with modprobe

  • Change debug_quirk value of shdci_pci (options sdhci debug_quirks=0x40)










share|improve this question









New contributor




Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











I'm unable to read any SD card from Linux. I already tried both SD cards that I have here in different machines (windows and Linux) and they work flawlessly, I also booted from a live USB (the same kernel and distro I have installed) and they also work, so it must be something in my current Kali Linux install that is causing this.



First of all, these are the logs I receive when inserting the SD card:



Jan  4 22:41:42 matrix kernel: [ 2028.923668] mmc0: card lacks mandatory switch function, performance might suffer
Jan 4 22:41:42 matrix kernel: [ 2028.923685] mmc0: new SD card at address aaaa
Jan 4 22:41:42 matrix kernel: [ 2028.924358] mmcblk0: mmc0:aaaa DSC16 256 MiB (ro)
Jan 4 22:41:42 matrix kernel: [ 2029.006966] mmcblk0: p1
Jan 4 22:41:42 matrix kernel: [ 2029.006980] mmcblk0: p1 size 31108096 extends beyond EOD, truncated
Jan 4 22:41:43 matrix kernel: [ 2029.611115] print_req_error: I/O error, dev mmcblk0, sector 524672
Jan 4 22:41:43 matrix kernel: [ 2029.746877] print_req_error: I/O error, dev mmcblk0, sector 524673
Jan 4 22:41:43 matrix kernel: [ 2029.882571] print_req_error: I/O error, dev mmcblk0, sector 524674
Jan 4 22:41:43 matrix kernel: [ 2030.017980] print_req_error: I/O error, dev mmcblk0, sector 524675
Jan 4 22:41:43 matrix kernel: [ 2030.153261] print_req_error: I/O error, dev mmcblk0, sector 524676
Jan 4 22:41:44 matrix kernel: [ 2030.288366] print_req_error: I/O error, dev mmcblk0, sector 524677
Jan 4 22:41:44 matrix kernel: [ 2030.424021] print_req_error: I/O error, dev mmcblk0, sector 524678
Jan 4 22:41:44 matrix kernel: [ 2030.559682] print_req_error: I/O error, dev mmcblk0, sector 524679
Jan 4 22:41:44 matrix kernel: [ 2030.966821] print_req_error: I/O error, dev mmcblk0, sector 524672
Jan 4 22:41:44 matrix kernel: [ 2031.101915] print_req_error: I/O error, dev mmcblk0, sector 524673
Jan 4 22:41:45 matrix kernel: [ 2031.913602] Buffer I/O error on dev mmcblk0, logical block 65584, async page read
Jan 4 22:41:48 matrix kernel: [ 2034.631681] print_req_error: 21 callbacks suppressed
Jan 4 22:41:48 matrix kernel: [ 2034.631686] print_req_error: I/O error, dev mmcblk0, sector 524679
Jan 4 22:41:48 matrix kernel: [ 2034.631701] Buffer I/O error on dev mmcblk0p1, logical block 64560, async page read


This is my the output of lspci -v, more specifically, the SD card reader:



02:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01) (prog-if 01)
Subsystem: Lenovo SD/MMC Card Reader Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at e1301000 (32-bit, non-prefetchable) [size=4K]
Memory at e1300000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci


output of lsmod | grep mmc



mmc_block              45056  0
mmc_core 172032 4 sdhci,cqhci,mmc_block,sdhci_pci


dmesg boot output related to the mmc:



[    1.271406] mmc0: Unknown controller version (3). You may experience problems.
[ 1.271639] mmc0: SDHCI controller on PCI [0000:02:00.0] using ADMA


This is my kernel:



Linux matrix 4.18.0-kali2-amd64 #1 SMP Debian 4.18.10-2kali1 (2018-10-09) x86_64 GNU/Linux


Things that I already tried:




  • Disable and enable sdhci with modprobe

  • Change debug_quirk value of shdci_pci (options sdhci debug_quirks=0x40)







kernel kali-linux sd-card mmc






share|improve this question









New contributor




Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.











share|improve this question









New contributor




Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









share|improve this question




share|improve this question








edited 2 days ago









Rui F Ribeiro

39.2k1479130




39.2k1479130






New contributor




Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.









asked 2 days ago









Jean Novak

11




11




New contributor




Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.





New contributor





Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.






Jean Novak is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.








  • 3




    Possible duplicate of Why is Kali Linux so hard to set up? Why won't people help me?
    – RalfFriedl
    2 days ago










  • are you saying that the SD cards worked on other machines, but they do not work on yours? ..... maybe you have a hardware issue
    – jsotola
    yesterday










  • This is not a hardware issue since I can boot the same distro/kernel linux via liveUSB and read the SD cards with no problem.
    – Jean Novak
    yesterday










  • @RalfFriedl, Thank you for pointing out my lack of knowledge. I understand Kali linux is not a "newbie" distro but since I'm working in the netsec field, I tought about giving Kali a try as my daily OS and not only as specialized liveUSB distro. I'm no new to linux, I believe the point of the forum is to share knowledge and using your external point of view of the problem to advice a future solution. Thanks anyway, I read the post you linked and its a fair point.
    – Jean Novak
    yesterday










  • Hi @A.B, thanks for your reply. Does not matter which sd card I insert, this output is shown everytime. If I try to read the same SD card in other computer, it works fine. If I boot my computer from a live USB and try reading the SD card again, it works as well.
    – Jean Novak
    yesterday














  • 3




    Possible duplicate of Why is Kali Linux so hard to set up? Why won't people help me?
    – RalfFriedl
    2 days ago










  • are you saying that the SD cards worked on other machines, but they do not work on yours? ..... maybe you have a hardware issue
    – jsotola
    yesterday










  • This is not a hardware issue since I can boot the same distro/kernel linux via liveUSB and read the SD cards with no problem.
    – Jean Novak
    yesterday










  • @RalfFriedl, Thank you for pointing out my lack of knowledge. I understand Kali linux is not a "newbie" distro but since I'm working in the netsec field, I tought about giving Kali a try as my daily OS and not only as specialized liveUSB distro. I'm no new to linux, I believe the point of the forum is to share knowledge and using your external point of view of the problem to advice a future solution. Thanks anyway, I read the post you linked and its a fair point.
    – Jean Novak
    yesterday










  • Hi @A.B, thanks for your reply. Does not matter which sd card I insert, this output is shown everytime. If I try to read the same SD card in other computer, it works fine. If I boot my computer from a live USB and try reading the SD card again, it works as well.
    – Jean Novak
    yesterday








3




3




Possible duplicate of Why is Kali Linux so hard to set up? Why won't people help me?
– RalfFriedl
2 days ago




Possible duplicate of Why is Kali Linux so hard to set up? Why won't people help me?
– RalfFriedl
2 days ago












are you saying that the SD cards worked on other machines, but they do not work on yours? ..... maybe you have a hardware issue
– jsotola
yesterday




are you saying that the SD cards worked on other machines, but they do not work on yours? ..... maybe you have a hardware issue
– jsotola
yesterday












This is not a hardware issue since I can boot the same distro/kernel linux via liveUSB and read the SD cards with no problem.
– Jean Novak
yesterday




This is not a hardware issue since I can boot the same distro/kernel linux via liveUSB and read the SD cards with no problem.
– Jean Novak
yesterday












@RalfFriedl, Thank you for pointing out my lack of knowledge. I understand Kali linux is not a "newbie" distro but since I'm working in the netsec field, I tought about giving Kali a try as my daily OS and not only as specialized liveUSB distro. I'm no new to linux, I believe the point of the forum is to share knowledge and using your external point of view of the problem to advice a future solution. Thanks anyway, I read the post you linked and its a fair point.
– Jean Novak
yesterday




@RalfFriedl, Thank you for pointing out my lack of knowledge. I understand Kali linux is not a "newbie" distro but since I'm working in the netsec field, I tought about giving Kali a try as my daily OS and not only as specialized liveUSB distro. I'm no new to linux, I believe the point of the forum is to share knowledge and using your external point of view of the problem to advice a future solution. Thanks anyway, I read the post you linked and its a fair point.
– Jean Novak
yesterday












Hi @A.B, thanks for your reply. Does not matter which sd card I insert, this output is shown everytime. If I try to read the same SD card in other computer, it works fine. If I boot my computer from a live USB and try reading the SD card again, it works as well.
– Jean Novak
yesterday




Hi @A.B, thanks for your reply. Does not matter which sd card I insert, this output is shown everytime. If I try to read the same SD card in other computer, it works fine. If I boot my computer from a live USB and try reading the SD card again, it works as well.
– Jean Novak
yesterday










0






active

oldest

votes











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});






Jean Novak is a new contributor. Be nice, and check out our Code of Conduct.










draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f492608%2funable-to-read-sd-cards-linux%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























0






active

oldest

votes








0






active

oldest

votes









active

oldest

votes






active

oldest

votes








Jean Novak is a new contributor. Be nice, and check out our Code of Conduct.










draft saved

draft discarded


















Jean Novak is a new contributor. Be nice, and check out our Code of Conduct.













Jean Novak is a new contributor. Be nice, and check out our Code of Conduct.












Jean Novak is a new contributor. Be nice, and check out our Code of Conduct.
















Thanks for contributing an answer to Unix & Linux Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.





Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


Please pay close attention to the following guidance:


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f492608%2funable-to-read-sd-cards-linux%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

How to make a Squid Proxy server?

Is this a new Fibonacci Identity?

19世紀