Ubuntu 18.04 can't recognize my SSD
I got a new Lenovo Ideapad Flex 5, recently. Previously, I had been using a 10-year-old system. A lot of things have changed since then and I wasn't up-to-date with the latest tech.
So this new system has a single 500GB NVMe SSD and had Windows 10 pre-installed on it. Now I want to install Ubuntu as well (dual boot). For this, I shrunk my Windows partition to half (originally, there was only a single partition with Windows 10 installed on it).
Now I started the Ubuntu 18.04 setup (from a USB) and proceeded with installing it. But it couldn't recognize my SSD :(
So, I started digging in for a solution. I found that there's an option in the BIOS namely, SATA Controller Mode which was set to "Intel RST Premium" (the other option is AHCI).
A little bit lookup on the Internet tells me that Intel RST premium technology is an application for managing RAID arrays. So I am not sure what this BIOS option is.
I decided to just switch to AHCI mode but then I would have to re-install Windows 10 (which I don't want to). Furthermore, while changing to AHCI mode it gives me a warning - "Existing data stored on drivers will be erased when resetting controller mode. Proceed?", to which obviously I say No, because I don't know which "data" and "driver" is it talking about.
Also, let's say if I change to AHCI mode, do I lose some performance for Windows? (Oh c'mon, Intel RST Premium has cool words like rapid and premium in it. Don't tell me they are just for name's sake?!!)
Next, I also came across very similar questions on SE but some of them talk about how to switch to AHCI mode without re-installing Windows, while someone else talked about utilities such as dmraid and mdadm to configure things.
I am unsure what to do next. I just want to dual boot Windows and Ubuntu ...and live a peaceful life.
dual-boot partitioning raid dmraid
asked Dec 5 '18 at 8:31
kishlayakishlaya
1062
add a comment |
I got a new Lenovo Ideapad Flex 5, recently. Previously, I had been using a 10-year-old system. A lot of things have changed since then and I wasn't up-to-date with the latest tech.
So this new system has a single 500GB NVMe SSD and had Windows 10 pre-installed on it. Now I want to install Ubuntu as well (dual boot). For this, I shrunk my Windows partition to half (originally, there was only a single partition with Windows 10 installed on it).
Now I started the Ubuntu 18.04 setup (from a USB) and proceeded with installing it. But it couldn't recognize my SSD :(
So, I started digging in for a solution. I found that there's an option in the BIOS namely, SATA Controller Mode which was set to "Intel RST Premium" (the other option is AHCI).
A little bit lookup on the Internet tells me that Intel RST premium technology is an application for managing RAID arrays. So I am not sure what this BIOS option is.
I decided to just switch to AHCI mode but then I would have to re-install Windows 10 (which I don't want to). Furthermore, while changing to AHCI mode it gives me a warning - "Existing data stored on drivers will be erased when resetting controller mode. Proceed?", to which obviously I say No, because I don't know which "data" and "driver" is it talking about.
Also, let's say if I change to AHCI mode, do I lose some performance for Windows? (Oh c'mon, Intel RST Premium has cool words like rapid and premium in it. Don't tell me they are just for name's sake?!!)
Next, I also came across very similar questions on SE but some of them talk about how to switch to AHCI mode without re-installing Windows, while someone else talked about utilities such as dmraid and mdadm to configure things.
I am unsure what to do next. I just want to dual boot Windows and Ubuntu ...and live a peaceful life.
dual-boot partitioning raid dmraid
asked Dec 5 '18 at 8:31
kishlayakishlaya
1062
You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
– Bernard Wei
Dec 5 '18 at 19:27
@BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
– kishlaya
Dec 6 '18 at 7:44
RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
– Bernard Wei
Dec 6 '18 at 19:45
add a comment |
I got a new Lenovo Ideapad Flex 5, recently. Previously, I had been using a 10-year-old system. A lot of things have changed since then and I wasn't up-to-date with the latest tech.
So this new system has a single 500GB NVMe SSD and had Windows 10 pre-installed on it. Now I want to install Ubuntu as well (dual boot). For this, I shrunk my Windows partition to half (originally, there was only a single partition with Windows 10 installed on it).
Now I started the Ubuntu 18.04 setup (from a USB) and proceeded with installing it. But it couldn't recognize my SSD :(
So, I started digging in for a solution. I found that there's an option in the BIOS namely, SATA Controller Mode which was set to "Intel RST Premium" (the other option is AHCI).
A little bit lookup on the Internet tells me that Intel RST premium technology is an application for managing RAID arrays. So I am not sure what this BIOS option is.
I decided to just switch to AHCI mode but then I would have to re-install Windows 10 (which I don't want to). Furthermore, while changing to AHCI mode it gives me a warning - "Existing data stored on drivers will be erased when resetting controller mode. Proceed?", to which obviously I say No, because I don't know which "data" and "driver" is it talking about.
Also, let's say if I change to AHCI mode, do I lose some performance for Windows? (Oh c'mon, Intel RST Premium has cool words like rapid and premium in it. Don't tell me they are just for name's sake?!!)
Next, I also came across very similar questions on SE but some of them talk about how to switch to AHCI mode without re-installing Windows, while someone else talked about utilities such as dmraid and mdadm to configure things.
I am unsure what to do next. I just want to dual boot Windows and Ubuntu ...and live a peaceful life.
dual-boot partitioning raid dmraid
asked Dec 5 '18 at 8:31
kishlayakishlaya
1062
I got a new Lenovo Ideapad Flex 5, recently. Previously, I had been using a 10-year-old system. A lot of things have changed since then and I wasn't up-to-date with the latest tech.
So this new system has a single 500GB NVMe SSD and had Windows 10 pre-installed on it. Now I want to install Ubuntu as well (dual boot). For this, I shrunk my Windows partition to half (originally, there was only a single partition with Windows 10 installed on it).
Now I started the Ubuntu 18.04 setup (from a USB) and proceeded with installing it. But it couldn't recognize my SSD :(
So, I started digging in for a solution. I found that there's an option in the BIOS namely, SATA Controller Mode which was set to "Intel RST Premium" (the other option is AHCI).
A little bit lookup on the Internet tells me that Intel RST premium technology is an application for managing RAID arrays. So I am not sure what this BIOS option is.
I decided to just switch to AHCI mode but then I would have to re-install Windows 10 (which I don't want to). Furthermore, while changing to AHCI mode it gives me a warning - "Existing data stored on drivers will be erased when resetting controller mode. Proceed?", to which obviously I say No, because I don't know which "data" and "driver" is it talking about.
Also, let's say if I change to AHCI mode, do I lose some performance for Windows? (Oh c'mon, Intel RST Premium has cool words like rapid and premium in it. Don't tell me they are just for name's sake?!!)
Next, I also came across very similar questions on SE but some of them talk about how to switch to AHCI mode without re-installing Windows, while someone else talked about utilities such as dmraid and mdadm to configure things.
I am unsure what to do next. I just want to dual boot Windows and Ubuntu ...and live a peaceful life.
dual-boot partitioning raid dmraid
dual-boot partitioning raid dmraid
asked Dec 5 '18 at 8:31
kishlayakishlaya
1062
asked Dec 5 '18 at 8:31
kishlayakishlaya
1062
asked Dec 5 '18 at 8:31
kishlayakishlaya
1062
asked Dec 5 '18 at 8:31
kishlayakishlaya
1062
asked Dec 5 '18 at 8:31
kishlayakishlaya
1062
1062
You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
– Bernard Wei
Dec 5 '18 at 19:27
@BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
– kishlaya
Dec 6 '18 at 7:44
RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
– Bernard Wei
Dec 6 '18 at 19:45
add a comment |
You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
– Bernard Wei
Dec 5 '18 at 19:27
@BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
– kishlaya
Dec 6 '18 at 7:44
RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
– Bernard Wei
Dec 6 '18 at 19:45
You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
– Bernard Wei
Dec 5 '18 at 19:27
You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
– Bernard Wei
Dec 5 '18 at 19:27
@BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
– kishlaya
Dec 6 '18 at 7:44
@BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
– kishlaya
Dec 6 '18 at 7:44
RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
– Bernard Wei
Dec 6 '18 at 19:45
RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
– Bernard Wei
Dec 6 '18 at 19:45
add a comment |
1 Answer
1
active
oldest
votes
This answer should help you, contains information on how to switch from RST to AHCI:
Which location to install boot-loader?
https://medium.com/@petragospodneti/windows-10-and-linux-love-hate-dual-boot-problems-d9994cbe16c0
answered Feb 3 at 22:35
AbhiAbhi
62
Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– Kevin Bowen
Feb 3 at 23:36
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1098577%2fubuntu-18-04-cant-recognize-my-ssd%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
This answer should help you, contains information on how to switch from RST to AHCI:
Which location to install boot-loader?
https://medium.com/@petragospodneti/windows-10-and-linux-love-hate-dual-boot-problems-d9994cbe16c0
answered Feb 3 at 22:35
AbhiAbhi
62
Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– Kevin Bowen
Feb 3 at 23:36
add a comment |
This answer should help you, contains information on how to switch from RST to AHCI:
Which location to install boot-loader?
https://medium.com/@petragospodneti/windows-10-and-linux-love-hate-dual-boot-problems-d9994cbe16c0
answered Feb 3 at 22:35
AbhiAbhi
62
Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– Kevin Bowen
Feb 3 at 23:36
add a comment |
This answer should help you, contains information on how to switch from RST to AHCI:
Which location to install boot-loader?
https://medium.com/@petragospodneti/windows-10-and-linux-love-hate-dual-boot-problems-d9994cbe16c0
answered Feb 3 at 22:35
AbhiAbhi
62
This answer should help you, contains information on how to switch from RST to AHCI:
Which location to install boot-loader?
https://medium.com/@petragospodneti/windows-10-and-linux-love-hate-dual-boot-problems-d9994cbe16c0
answered Feb 3 at 22:35
AbhiAbhi
62
answered Feb 3 at 22:35
AbhiAbhi
62
answered Feb 3 at 22:35
AbhiAbhi
62
answered Feb 3 at 22:35
AbhiAbhi
62
62
Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– Kevin Bowen
Feb 3 at 23:36
add a comment |
Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– Kevin Bowen
Feb 3 at 23:36
Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– Kevin Bowen
Feb 3 at 23:36
Whilst this may theoretically answer the question, it would be preferable to include the essential parts of the answer here, and provide the link for reference.
– Kevin Bowen
Feb 3 at 23:36
add a comment |
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1098577%2fubuntu-18-04-cant-recognize-my-ssd%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
You can change RAID to AHCI without re-installing windows, see triplescomputers.com/blog/uncategorized/…
– Bernard Wei
Dec 5 '18 at 19:27
@BernardWei I had to do that exactly. But is there any other way to install Ubuntu without changing to AHCI (Intel RST offers some performance benefits, right?)
– kishlaya
Dec 6 '18 at 7:44
RAID does not offer any benefit over AHCI for single storage. Some NVMe drive offers AHCI interface but it severly slow down it's performance if used. If you know your drive is NVMe and support PCIe, you might want to by pass RAID or AHCI altogether. PCIe are 2 to 4 times faster than the fastest SATA speed.
– Bernard Wei
Dec 6 '18 at 19:45