fan is working always in Asus X542U
I installed Fedora 29 to Asus X542U. Now fan is working always and I can not control it. I tried sudo modprobe asus_laptop
command but result is:
modprobe: ERROR: could not insert 'asus_laptop': No such device
also I typed
dmesg | grep asus
result is
[ 5.353567] asus_wmi: ASUS WMI generic driver loaded
[ 5.358125] asus_wmi: Initialization: 0x1
[ 5.358180] asus_wmi: BIOS WMI version: 9.0
[ 5.358216] asus_wmi: SFUN value: 0x21
[ 5.359322] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[ 5.359947] asus_wmi: Number of fans: 0
[ 9813.808938] asus_wmi: Unknown key cf pressed
You can see asus_wmi: Number of fans: 0
.
also I checked fancontrol
service
➜ ~ fancontrol
Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor>
Active: inactive (dead)
I started fancontrol
service with this command: systemctl start fancontrol
but again it is not working
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor preset: disabled)
Active: inactive (dead)
there is no fan info in output of sensors
command
➜ ~ sensors
ath10k_hwmon-pci-0300
Adapter: PCI adapter
temp1: +91.0°C
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +45.0°C (high = +100.0°C, crit = +100.0°C)
What should I do ?
my system :
➜ ~ inxi -Fxxx
System: Host: localhost.localdomain Kernel: 4.19.5-300.fc29.x86_64 x86_64 bits: 64 compiler: gcc v: 8.2.1
Desktop: Gnome 3.30.2 wm: gnome-shell dm: GDM 3.30.1 Distro: Fedora release 29 (Twenty Nine)
Machine: Type: Laptop System: ASUSTeK product: X542URR v: 1.0 serial: <root required>
Mobo: ASUSTeK model: X542URR v: 1.0 serial: <root required> UEFI [Legacy]: American Megatrends
v: X542URR.303 date: 12/04/2017
Battery: ID-1: BAT0 charge: 35.8 Wh condition: 35.8/38.0 Wh (94%) volts: 7.6/7.6 model: ASUSTeK ASUS Battery
type: Li-ion serial: status: Not charging cycles: 8
Device-1: hidpp_battery_0 model: Logitech K520 serial: 2011-1b-bd-5d-c3
charge: 70% (should be ignored) rechargeable: yes status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse serial: 4055-57-b5-45-59
charge: 55% (should be ignored) rechargeable: yes status: Discharging
CPU: Topology: Quad Core model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Kaby Lake rev: A
L2 cache: 8192 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31872
Speed: 1450 MHz min/max: 400/1800 MHz Core speeds (MHz): 1: 1450 2: 1380 3: 1464 4: 1564 5: 1567
6: 1499 7: 1450 8: 1390
Graphics: Device-1: Intel UHD Graphics 620 vendor: ASUSTeK driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:5917
Device-2: NVIDIA GM108M [GeForce 930MX] vendor: ASUSTeK driver: nvidia v: 410.78 bus ID: 01:00.0
chip ID: 10de:134e
Display: x11 server: Fedora Project X.org 1.20.3 driver: nvidia compositor: gnome-shell
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: GeForce 930MX/PCIe/SSE2 v: 4.6.0 NVIDIA 410.78 direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:1f.3 chip ID: 8086:9d71
Sound Server: ALSA v: k4.19.5-300.fc29.x86_64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169
v: kernel port: d000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 4c:ed:fb:0b:4e:84
Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: AzureWave
driver: ath10k_pci v: kernel port: d000 bus ID: 03:00.0 chip ID: 168c:0042
IF: wlp3s0 state: up mac: 80:c5:f2:79:4a:4b
IF-ID-1: virbr0 state: down mac: 52:54:00:81:88:26
IF-ID-2: virbr0-nic state: down mac: 52:54:00:81:88:26
IF-ID-3: vmnet1 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:01
IF-ID-4: vmnet8 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:08
Drives: Local Storage: total: 2.26 TiB used: 1.24 TiB (54.8%)
ID-1: /dev/sda vendor: Toshiba model: Q300. size: 447.13 GiB speed: 6.0 Gb/s serial: 97KB50IPKQ4U
rev: 12.3 scheme: MBR
ID-2: /dev/sdb vendor: HGST (Hitachi) model: HTS541010B7E610 size: 931.51 GiB speed: 6.0 Gb/s
rotation: 5400 rpm serial: WXW1E87AVA83 rev: 1A03 scheme: GPT
ID-3: /dev/sdc type: USB vendor: Toshiba model: MQ01ABD100 size: 931.51 GiB serial: 20171212
scheme: MBR
Partition: ID-1: / size: 48.97 GiB used: 20.13 GiB (41.1%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 975.9 MiB used: 183.5 MiB (18.8%) fs: ext4 dev: /dev/sda1
ID-3: /home size: 381.23 GiB used: 32.14 GiB (8.4%) fs: ext4 dev: /dev/dm-2
ID-4: swap-1 size: 7.80 GiB used: 728.2 MiB (9.1%) fs: swap dev: /dev/dm-1
Sensors: System Temperatures: cpu: 44.0 C mobo: N/A gpu: nvidia temp: 43 C
Fan Speeds (RPM): N/A
Info: Processes: 320 Uptime: 5h 47m Memory: 7.67 GiB used: 4.56 GiB (59.5%) Init: systemd v: 239
runlevel: 5 target: graphical.target Compilers: gcc: 8.2.1 Shell: zsh v: 5.6.2
running in: gnome-terminal inxi: 3.0.26
I created a ticket in redhat bugzilla
fedora fan sensors asus
add a comment |
I installed Fedora 29 to Asus X542U. Now fan is working always and I can not control it. I tried sudo modprobe asus_laptop
command but result is:
modprobe: ERROR: could not insert 'asus_laptop': No such device
also I typed
dmesg | grep asus
result is
[ 5.353567] asus_wmi: ASUS WMI generic driver loaded
[ 5.358125] asus_wmi: Initialization: 0x1
[ 5.358180] asus_wmi: BIOS WMI version: 9.0
[ 5.358216] asus_wmi: SFUN value: 0x21
[ 5.359322] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[ 5.359947] asus_wmi: Number of fans: 0
[ 9813.808938] asus_wmi: Unknown key cf pressed
You can see asus_wmi: Number of fans: 0
.
also I checked fancontrol
service
➜ ~ fancontrol
Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor>
Active: inactive (dead)
I started fancontrol
service with this command: systemctl start fancontrol
but again it is not working
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor preset: disabled)
Active: inactive (dead)
there is no fan info in output of sensors
command
➜ ~ sensors
ath10k_hwmon-pci-0300
Adapter: PCI adapter
temp1: +91.0°C
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +45.0°C (high = +100.0°C, crit = +100.0°C)
What should I do ?
my system :
➜ ~ inxi -Fxxx
System: Host: localhost.localdomain Kernel: 4.19.5-300.fc29.x86_64 x86_64 bits: 64 compiler: gcc v: 8.2.1
Desktop: Gnome 3.30.2 wm: gnome-shell dm: GDM 3.30.1 Distro: Fedora release 29 (Twenty Nine)
Machine: Type: Laptop System: ASUSTeK product: X542URR v: 1.0 serial: <root required>
Mobo: ASUSTeK model: X542URR v: 1.0 serial: <root required> UEFI [Legacy]: American Megatrends
v: X542URR.303 date: 12/04/2017
Battery: ID-1: BAT0 charge: 35.8 Wh condition: 35.8/38.0 Wh (94%) volts: 7.6/7.6 model: ASUSTeK ASUS Battery
type: Li-ion serial: status: Not charging cycles: 8
Device-1: hidpp_battery_0 model: Logitech K520 serial: 2011-1b-bd-5d-c3
charge: 70% (should be ignored) rechargeable: yes status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse serial: 4055-57-b5-45-59
charge: 55% (should be ignored) rechargeable: yes status: Discharging
CPU: Topology: Quad Core model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Kaby Lake rev: A
L2 cache: 8192 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31872
Speed: 1450 MHz min/max: 400/1800 MHz Core speeds (MHz): 1: 1450 2: 1380 3: 1464 4: 1564 5: 1567
6: 1499 7: 1450 8: 1390
Graphics: Device-1: Intel UHD Graphics 620 vendor: ASUSTeK driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:5917
Device-2: NVIDIA GM108M [GeForce 930MX] vendor: ASUSTeK driver: nvidia v: 410.78 bus ID: 01:00.0
chip ID: 10de:134e
Display: x11 server: Fedora Project X.org 1.20.3 driver: nvidia compositor: gnome-shell
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: GeForce 930MX/PCIe/SSE2 v: 4.6.0 NVIDIA 410.78 direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:1f.3 chip ID: 8086:9d71
Sound Server: ALSA v: k4.19.5-300.fc29.x86_64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169
v: kernel port: d000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 4c:ed:fb:0b:4e:84
Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: AzureWave
driver: ath10k_pci v: kernel port: d000 bus ID: 03:00.0 chip ID: 168c:0042
IF: wlp3s0 state: up mac: 80:c5:f2:79:4a:4b
IF-ID-1: virbr0 state: down mac: 52:54:00:81:88:26
IF-ID-2: virbr0-nic state: down mac: 52:54:00:81:88:26
IF-ID-3: vmnet1 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:01
IF-ID-4: vmnet8 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:08
Drives: Local Storage: total: 2.26 TiB used: 1.24 TiB (54.8%)
ID-1: /dev/sda vendor: Toshiba model: Q300. size: 447.13 GiB speed: 6.0 Gb/s serial: 97KB50IPKQ4U
rev: 12.3 scheme: MBR
ID-2: /dev/sdb vendor: HGST (Hitachi) model: HTS541010B7E610 size: 931.51 GiB speed: 6.0 Gb/s
rotation: 5400 rpm serial: WXW1E87AVA83 rev: 1A03 scheme: GPT
ID-3: /dev/sdc type: USB vendor: Toshiba model: MQ01ABD100 size: 931.51 GiB serial: 20171212
scheme: MBR
Partition: ID-1: / size: 48.97 GiB used: 20.13 GiB (41.1%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 975.9 MiB used: 183.5 MiB (18.8%) fs: ext4 dev: /dev/sda1
ID-3: /home size: 381.23 GiB used: 32.14 GiB (8.4%) fs: ext4 dev: /dev/dm-2
ID-4: swap-1 size: 7.80 GiB used: 728.2 MiB (9.1%) fs: swap dev: /dev/dm-1
Sensors: System Temperatures: cpu: 44.0 C mobo: N/A gpu: nvidia temp: 43 C
Fan Speeds (RPM): N/A
Info: Processes: 320 Uptime: 5h 47m Memory: 7.67 GiB used: 4.56 GiB (59.5%) Init: systemd v: 239
runlevel: 5 target: graphical.target Compilers: gcc: 8.2.1 Shell: zsh v: 5.6.2
running in: gnome-terminal inxi: 3.0.26
I created a ticket in redhat bugzilla
fedora fan sensors asus
add a comment |
I installed Fedora 29 to Asus X542U. Now fan is working always and I can not control it. I tried sudo modprobe asus_laptop
command but result is:
modprobe: ERROR: could not insert 'asus_laptop': No such device
also I typed
dmesg | grep asus
result is
[ 5.353567] asus_wmi: ASUS WMI generic driver loaded
[ 5.358125] asus_wmi: Initialization: 0x1
[ 5.358180] asus_wmi: BIOS WMI version: 9.0
[ 5.358216] asus_wmi: SFUN value: 0x21
[ 5.359322] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[ 5.359947] asus_wmi: Number of fans: 0
[ 9813.808938] asus_wmi: Unknown key cf pressed
You can see asus_wmi: Number of fans: 0
.
also I checked fancontrol
service
➜ ~ fancontrol
Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor>
Active: inactive (dead)
I started fancontrol
service with this command: systemctl start fancontrol
but again it is not working
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor preset: disabled)
Active: inactive (dead)
there is no fan info in output of sensors
command
➜ ~ sensors
ath10k_hwmon-pci-0300
Adapter: PCI adapter
temp1: +91.0°C
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +45.0°C (high = +100.0°C, crit = +100.0°C)
What should I do ?
my system :
➜ ~ inxi -Fxxx
System: Host: localhost.localdomain Kernel: 4.19.5-300.fc29.x86_64 x86_64 bits: 64 compiler: gcc v: 8.2.1
Desktop: Gnome 3.30.2 wm: gnome-shell dm: GDM 3.30.1 Distro: Fedora release 29 (Twenty Nine)
Machine: Type: Laptop System: ASUSTeK product: X542URR v: 1.0 serial: <root required>
Mobo: ASUSTeK model: X542URR v: 1.0 serial: <root required> UEFI [Legacy]: American Megatrends
v: X542URR.303 date: 12/04/2017
Battery: ID-1: BAT0 charge: 35.8 Wh condition: 35.8/38.0 Wh (94%) volts: 7.6/7.6 model: ASUSTeK ASUS Battery
type: Li-ion serial: status: Not charging cycles: 8
Device-1: hidpp_battery_0 model: Logitech K520 serial: 2011-1b-bd-5d-c3
charge: 70% (should be ignored) rechargeable: yes status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse serial: 4055-57-b5-45-59
charge: 55% (should be ignored) rechargeable: yes status: Discharging
CPU: Topology: Quad Core model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Kaby Lake rev: A
L2 cache: 8192 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31872
Speed: 1450 MHz min/max: 400/1800 MHz Core speeds (MHz): 1: 1450 2: 1380 3: 1464 4: 1564 5: 1567
6: 1499 7: 1450 8: 1390
Graphics: Device-1: Intel UHD Graphics 620 vendor: ASUSTeK driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:5917
Device-2: NVIDIA GM108M [GeForce 930MX] vendor: ASUSTeK driver: nvidia v: 410.78 bus ID: 01:00.0
chip ID: 10de:134e
Display: x11 server: Fedora Project X.org 1.20.3 driver: nvidia compositor: gnome-shell
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: GeForce 930MX/PCIe/SSE2 v: 4.6.0 NVIDIA 410.78 direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:1f.3 chip ID: 8086:9d71
Sound Server: ALSA v: k4.19.5-300.fc29.x86_64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169
v: kernel port: d000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 4c:ed:fb:0b:4e:84
Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: AzureWave
driver: ath10k_pci v: kernel port: d000 bus ID: 03:00.0 chip ID: 168c:0042
IF: wlp3s0 state: up mac: 80:c5:f2:79:4a:4b
IF-ID-1: virbr0 state: down mac: 52:54:00:81:88:26
IF-ID-2: virbr0-nic state: down mac: 52:54:00:81:88:26
IF-ID-3: vmnet1 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:01
IF-ID-4: vmnet8 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:08
Drives: Local Storage: total: 2.26 TiB used: 1.24 TiB (54.8%)
ID-1: /dev/sda vendor: Toshiba model: Q300. size: 447.13 GiB speed: 6.0 Gb/s serial: 97KB50IPKQ4U
rev: 12.3 scheme: MBR
ID-2: /dev/sdb vendor: HGST (Hitachi) model: HTS541010B7E610 size: 931.51 GiB speed: 6.0 Gb/s
rotation: 5400 rpm serial: WXW1E87AVA83 rev: 1A03 scheme: GPT
ID-3: /dev/sdc type: USB vendor: Toshiba model: MQ01ABD100 size: 931.51 GiB serial: 20171212
scheme: MBR
Partition: ID-1: / size: 48.97 GiB used: 20.13 GiB (41.1%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 975.9 MiB used: 183.5 MiB (18.8%) fs: ext4 dev: /dev/sda1
ID-3: /home size: 381.23 GiB used: 32.14 GiB (8.4%) fs: ext4 dev: /dev/dm-2
ID-4: swap-1 size: 7.80 GiB used: 728.2 MiB (9.1%) fs: swap dev: /dev/dm-1
Sensors: System Temperatures: cpu: 44.0 C mobo: N/A gpu: nvidia temp: 43 C
Fan Speeds (RPM): N/A
Info: Processes: 320 Uptime: 5h 47m Memory: 7.67 GiB used: 4.56 GiB (59.5%) Init: systemd v: 239
runlevel: 5 target: graphical.target Compilers: gcc: 8.2.1 Shell: zsh v: 5.6.2
running in: gnome-terminal inxi: 3.0.26
I created a ticket in redhat bugzilla
fedora fan sensors asus
I installed Fedora 29 to Asus X542U. Now fan is working always and I can not control it. I tried sudo modprobe asus_laptop
command but result is:
modprobe: ERROR: could not insert 'asus_laptop': No such device
also I typed
dmesg | grep asus
result is
[ 5.353567] asus_wmi: ASUS WMI generic driver loaded
[ 5.358125] asus_wmi: Initialization: 0x1
[ 5.358180] asus_wmi: BIOS WMI version: 9.0
[ 5.358216] asus_wmi: SFUN value: 0x21
[ 5.359322] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input20
[ 5.359947] asus_wmi: Number of fans: 0
[ 9813.808938] asus_wmi: Unknown key cf pressed
You can see asus_wmi: Number of fans: 0
.
also I checked fancontrol
service
➜ ~ fancontrol
Loading configuration from /etc/fancontrol ...
Error: Can't read configuration file
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor>
Active: inactive (dead)
I started fancontrol
service with this command: systemctl start fancontrol
but again it is not working
➜ ~ systemctl status fancontrol
● fancontrol.service - Start fan control, if configured
Loaded: loaded (/usr/lib/systemd/system/fancontrol.service; disabled; vendor preset: disabled)
Active: inactive (dead)
there is no fan info in output of sensors
command
➜ ~ sensors
ath10k_hwmon-pci-0300
Adapter: PCI adapter
temp1: +91.0°C
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +46.0°C (high = +100.0°C, crit = +100.0°C)
Core 0: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 1: +45.0°C (high = +100.0°C, crit = +100.0°C)
Core 2: +44.0°C (high = +100.0°C, crit = +100.0°C)
Core 3: +45.0°C (high = +100.0°C, crit = +100.0°C)
What should I do ?
my system :
➜ ~ inxi -Fxxx
System: Host: localhost.localdomain Kernel: 4.19.5-300.fc29.x86_64 x86_64 bits: 64 compiler: gcc v: 8.2.1
Desktop: Gnome 3.30.2 wm: gnome-shell dm: GDM 3.30.1 Distro: Fedora release 29 (Twenty Nine)
Machine: Type: Laptop System: ASUSTeK product: X542URR v: 1.0 serial: <root required>
Mobo: ASUSTeK model: X542URR v: 1.0 serial: <root required> UEFI [Legacy]: American Megatrends
v: X542URR.303 date: 12/04/2017
Battery: ID-1: BAT0 charge: 35.8 Wh condition: 35.8/38.0 Wh (94%) volts: 7.6/7.6 model: ASUSTeK ASUS Battery
type: Li-ion serial: status: Not charging cycles: 8
Device-1: hidpp_battery_0 model: Logitech K520 serial: 2011-1b-bd-5d-c3
charge: 70% (should be ignored) rechargeable: yes status: Discharging
Device-2: hidpp_battery_1 model: Logitech Wireless Mouse serial: 4055-57-b5-45-59
charge: 55% (should be ignored) rechargeable: yes status: Discharging
CPU: Topology: Quad Core model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Kaby Lake rev: A
L2 cache: 8192 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31872
Speed: 1450 MHz min/max: 400/1800 MHz Core speeds (MHz): 1: 1450 2: 1380 3: 1464 4: 1564 5: 1567
6: 1499 7: 1450 8: 1390
Graphics: Device-1: Intel UHD Graphics 620 vendor: ASUSTeK driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:5917
Device-2: NVIDIA GM108M [GeForce 930MX] vendor: ASUSTeK driver: nvidia v: 410.78 bus ID: 01:00.0
chip ID: 10de:134e
Display: x11 server: Fedora Project X.org 1.20.3 driver: nvidia compositor: gnome-shell
resolution: 1920x1080~60Hz, 1920x1080~60Hz
OpenGL: renderer: GeForce 930MX/PCIe/SSE2 v: 4.6.0 NVIDIA 410.78 direct render: Yes
Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel
bus ID: 00:1f.3 chip ID: 8086:9d71
Sound Server: ALSA v: k4.19.5-300.fc29.x86_64
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK driver: r8169
v: kernel port: d000 bus ID: 02:00.0 chip ID: 10ec:8168
IF: enp2s0 state: up speed: 1000 Mbps duplex: full mac: 4c:ed:fb:0b:4e:84
Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter vendor: AzureWave
driver: ath10k_pci v: kernel port: d000 bus ID: 03:00.0 chip ID: 168c:0042
IF: wlp3s0 state: up mac: 80:c5:f2:79:4a:4b
IF-ID-1: virbr0 state: down mac: 52:54:00:81:88:26
IF-ID-2: virbr0-nic state: down mac: 52:54:00:81:88:26
IF-ID-3: vmnet1 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:01
IF-ID-4: vmnet8 state: unknown speed: N/A duplex: N/A mac: 00:50:56:c0:00:08
Drives: Local Storage: total: 2.26 TiB used: 1.24 TiB (54.8%)
ID-1: /dev/sda vendor: Toshiba model: Q300. size: 447.13 GiB speed: 6.0 Gb/s serial: 97KB50IPKQ4U
rev: 12.3 scheme: MBR
ID-2: /dev/sdb vendor: HGST (Hitachi) model: HTS541010B7E610 size: 931.51 GiB speed: 6.0 Gb/s
rotation: 5400 rpm serial: WXW1E87AVA83 rev: 1A03 scheme: GPT
ID-3: /dev/sdc type: USB vendor: Toshiba model: MQ01ABD100 size: 931.51 GiB serial: 20171212
scheme: MBR
Partition: ID-1: / size: 48.97 GiB used: 20.13 GiB (41.1%) fs: ext4 dev: /dev/dm-0
ID-2: /boot size: 975.9 MiB used: 183.5 MiB (18.8%) fs: ext4 dev: /dev/sda1
ID-3: /home size: 381.23 GiB used: 32.14 GiB (8.4%) fs: ext4 dev: /dev/dm-2
ID-4: swap-1 size: 7.80 GiB used: 728.2 MiB (9.1%) fs: swap dev: /dev/dm-1
Sensors: System Temperatures: cpu: 44.0 C mobo: N/A gpu: nvidia temp: 43 C
Fan Speeds (RPM): N/A
Info: Processes: 320 Uptime: 5h 47m Memory: 7.67 GiB used: 4.56 GiB (59.5%) Init: systemd v: 239
runlevel: 5 target: graphical.target Compilers: gcc: 8.2.1 Shell: zsh v: 5.6.2
running in: gnome-terminal inxi: 3.0.26
I created a ticket in redhat bugzilla
fedora fan sensors asus
fedora fan sensors asus
edited Jan 18 at 9:17
user4757345
asked Dec 14 '18 at 13:08
user4757345user4757345
2002210
2002210
add a comment |
add a comment |
1 Answer
1
active
oldest
votes
Have you checked the system BIOS for settings relating to fan control? I had a similar issue on an HP laptop and managed to sort it out from there.
i checked BIOS but i can not find any settings related to fan control. itshows only fan rpm info. i think problem is fancontrol service of linux
– user4757345
Dec 14 '18 at 14:56
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f487970%2ffan-is-working-always-in-asus-x542u%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
Have you checked the system BIOS for settings relating to fan control? I had a similar issue on an HP laptop and managed to sort it out from there.
i checked BIOS but i can not find any settings related to fan control. itshows only fan rpm info. i think problem is fancontrol service of linux
– user4757345
Dec 14 '18 at 14:56
add a comment |
Have you checked the system BIOS for settings relating to fan control? I had a similar issue on an HP laptop and managed to sort it out from there.
i checked BIOS but i can not find any settings related to fan control. itshows only fan rpm info. i think problem is fancontrol service of linux
– user4757345
Dec 14 '18 at 14:56
add a comment |
Have you checked the system BIOS for settings relating to fan control? I had a similar issue on an HP laptop and managed to sort it out from there.
Have you checked the system BIOS for settings relating to fan control? I had a similar issue on an HP laptop and managed to sort it out from there.
answered Dec 14 '18 at 14:07
GttGtt
293
293
i checked BIOS but i can not find any settings related to fan control. itshows only fan rpm info. i think problem is fancontrol service of linux
– user4757345
Dec 14 '18 at 14:56
add a comment |
i checked BIOS but i can not find any settings related to fan control. itshows only fan rpm info. i think problem is fancontrol service of linux
– user4757345
Dec 14 '18 at 14:56
i checked BIOS but i can not find any settings related to fan control. itshows only fan rpm info. i think problem is fancontrol service of linux
– user4757345
Dec 14 '18 at 14:56
i checked BIOS but i can not find any settings related to fan control. itshows only fan rpm info. i think problem is fancontrol service of linux
– user4757345
Dec 14 '18 at 14:56
add a comment |
Thanks for contributing an answer to Unix & Linux Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f487970%2ffan-is-working-always-in-asus-x542u%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown