Open SSL make not working
0
I am trying to get openssl 1.1.1 so I can use TLS 1.3 with nginx, below is my code as well as the error
Best I can figure is that LIBRPATH is empty and that would cause the issue but I can't seem to find what value I should have it set to.
Code:
tar xvf openssl-1.1.1.tar.gz
cd openssl-1.1.1
./config -Wl,--enable-new-dtags,-rpath,'$(LIBRPATH)'
make
make install
cp /usr/local/bin/openssl /usr/bin/
export LD_LIBRARY_PATH=/usr/local/lib
echo "export LD_LIBRARY_PATH=/usr/local/lib" >> ~/.bashrc
Error
./config -Wl,-rpath,'$(LIBRPATH)'
Operating system: x86_64-whatever-linux2
Configuring OpenSSL version 1.1.1 (0x1010100fL) for linux-x86_64
Using os-specific seed configuration
Creating configdata.pm
Creating Makefile
**********************************************************************
*** ***
*** If you want to report a building issue, please include the ***
*** output from this command: ***
*** ***
*** perl configdata.pm --dump ***
*** ***
**********************************************************************
Output of perl script: perl configdata.pm --dump
Command line (with current working directory = .):
/usr/bin/perl ./Configure linux-x86_64 -Wl,-rpath,$(LIBRPATH)
Perl information:
/usr/bin/perl
5.22.1 for x86_64-linux-gnu-thread-multi
Enabled features:
afalgeng
aria
asm
async
autoalginit
autoerrinit
autoload-config
bf
blake2
camellia
capieng
cast
chacha
cmac
cms
comp
ct
deprecated
des
dgram
dh
dsa
dso
dtls
dynamic-engine
ec
ec2m
ecdh
ecdsa
engine
err
filenames
gost
hw(-.+)?
idea
makedepend
md4
mdc2
multiblock
nextprotoneg
ocb
ocsp
pic
poly1305
posix-io
psk
rc2
rc4
rdrand
rfc3779
rmd160
scrypt
seed
shared
siphash
sm2
sm3
sm4
sock
srp
srtp
sse2
ssl
static-engine
stdio
tests
threads
tls
ts
ui-console
whirlpool
tls1
tls1-method
tls1_1
tls1_1-method
tls1_2
tls1_2-method
tls1_3
dtls1
dtls1-method
dtls1_2
dtls1_2-method
Disabled features:
asan [default] OPENSSL_NO_ASAN
crypto-mdebug [default] OPENSSL_NO_CRYPTO_MDEBUG
crypto-mdebug-backtrace [default] OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
devcryptoeng [default] OPENSSL_NO_DEVCRYPTOENG
ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128
egd [default] OPENSSL_NO_EGD
external-tests [default] OPENSSL_NO_EXTERNAL_TESTS
fuzz-libfuzzer [default] OPENSSL_NO_FUZZ_LIBFUZZER
fuzz-afl [default] OPENSSL_NO_FUZZ_AFL
heartbeats [default] OPENSSL_NO_HEARTBEATS
md2 [default] OPENSSL_NO_MD2 (skip crypto/md2)
msan [default] OPENSSL_NO_MSAN
rc5 [default] OPENSSL_NO_RC5 (skip crypto/rc5)
sctp [default] OPENSSL_NO_SCTP
ssl-trace [default] OPENSSL_NO_SSL_TRACE
ubsan [default] OPENSSL_NO_UBSAN
unit-test [default] OPENSSL_NO_UNIT_TEST
weak-ssl-ciphers [default] OPENSSL_NO_WEAK_SSL_CIPHERS
zlib [default]
zlib-dynamic [default]
ssl3 [default] OPENSSL_NO_SSL3
ssl3-method [default] OPENSSL_NO_SSL3_METHOD
Config target attributes:
AR => "ar",
ARFLAGS => "r",
CC => "gcc",
CFLAGS => "-Wall -O3",
CXX => "g++",
CXXFLAGS => "-Wall -O3",
HASHBANGPERL => "/usr/bin/env perl",
RANLIB => "ranlib",
RC => "windres",
aes_asm_src => "aes-x86_64.s vpaes-x86_64.s bsaes-x86_64.s aesni-x86_64.s aesni-sha1-x86_64.s aesni-sha256-x86_64.s aesni-mb-x86_64.s",
aes_obj => "aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o",
apps_aux_src => "",
apps_init_src => "",
apps_obj => "",
bf_asm_src => "bf_enc.c",
bf_obj => "bf_enc.o",
bn_asm_src => "asm/x86_64-gcc.c x86_64-mont.s x86_64-mont5.s x86_64-gf2m.s rsaz_exp.c rsaz-x86_64.s rsaz-avx2.s",
bn_obj => "asm/x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o",
bn_ops => "SIXTY_FOUR_BIT_LONG",
build_file => "Makefile",
build_scheme => [ "unified", "unix" ],
cast_asm_src => "c_enc.c",
cast_obj => "c_enc.o",
cflags => "-pthread -m64",
chacha_asm_src => "chacha-x86_64.s",
chacha_obj => "chacha-x86_64.o",
cmll_asm_src => "cmll-x86_64.s cmll_misc.c",
cmll_obj => "cmll-x86_64.o cmll_misc.o",
cppflags => "",
cpuid_asm_src => "x86_64cpuid.s",
cpuid_obj => "x86_64cpuid.o",
cxxflags => "-std=c++11 -pthread -m64",
defines => [ ],
des_asm_src => "des_enc.c fcrypt_b.c",
des_obj => "des_enc.o fcrypt_b.o",
disable => [ ],
dso_extension => ".so",
dso_scheme => "dlfcn",
ec_asm_src => "ecp_nistz256.c ecp_nistz256-x86_64.s x25519-x86_64.s",
ec_obj => "ecp_nistz256.o ecp_nistz256-x86_64.o x25519-x86_64.o",
enable => [ "afalgeng" ],
ex_libs => "-ldl -pthread",
exe_extension => "",
includes => [ ],
keccak1600_asm_src => "keccak1600-x86_64.s",
keccak1600_obj => "keccak1600-x86_64.o",
lflags => "",
lib_cflags => "",
lib_cppflags => "-DOPENSSL_USE_NODELETE -DL_ENDIAN",
lib_defines => [ ],
md5_asm_src => "md5-x86_64.s",
md5_obj => "md5-x86_64.o",
modes_asm_src => "ghash-x86_64.s aesni-gcm-x86_64.s",
modes_obj => "ghash-x86_64.o aesni-gcm-x86_64.o",
module_cflags => "-fPIC",
module_cxxflags => "",
module_ldflags => "-Wl,-znodelete -shared -Wl,-Bsymbolic",
multilib => "64",
padlock_asm_src => "e_padlock-x86_64.s",
padlock_obj => "e_padlock-x86_64.o",
perlasm_scheme => "elf",
poly1305_asm_src => "poly1305-x86_64.s",
poly1305_obj => "poly1305-x86_64.o",
rc4_asm_src => "rc4-x86_64.s rc4-md5-x86_64.s",
rc4_obj => "rc4-x86_64.o rc4-md5-x86_64.o",
rc5_asm_src => "rc5_enc.c",
rc5_obj => "rc5_enc.o",
rmd160_asm_src => "",
rmd160_obj => "",
sha1_asm_src => "sha1-x86_64.s sha256-x86_64.s sha512-x86_64.s sha1-mb-x86_64.s sha256-mb-x86_64.s",
sha1_obj => "sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o",
shared_cflag => "-fPIC",
shared_defflag => "-Wl,--version-script=",
shared_defines => [ ],
shared_extension => ".so.$(SHLIB_VERSION_NUMBER)",
shared_extension_simple => ".so",
shared_ldflag => "-Wl,-znodelete -shared -Wl,-Bsymbolic",
shared_rcflag => "",
shared_sonameflag => "-Wl,-soname=",
shared_target => "linux-shared",
thread_defines => [ ],
thread_scheme => "pthreads",
unistd => "<unistd.h>",
uplink_aux_src => "",
uplink_obj => "",
wp_asm_src => "wp-x86_64.s",
wp_obj => "wp-x86_64.o",
Recorded environment:
AR =
BUILDFILE =
CC =
CROSS_COMPILE =
CXX =
HASHBANGPERL =
OPENSSL_LOCAL_CONFIG_DIR =
PERL =
RANLIB =
RC =
WINDRES =
__CNF_CFLAGS =
__CNF_CPPDEFINES =
__CNF_CPPFLAGS =
__CNF_CPPINCLUDES =
__CNF_CXXFLAGS =
__CNF_LDFLAGS =
__CNF_LDLIBS =
Makevars:
AR = ar
ARFLAGS = r
CC = gcc
CFLAGS = -Wall -O3
CPPDEFINES =
CPPFLAGS =
CPPINCLUDES =
CXX = g++
CXXFLAGS = -Wall -O3
HASHBANGPERL = /usr/bin/env perl
LDFLAGS = -Wl,-rpath,$(LIBRPATH)
LDLIBS =
PERL = /usr/bin/perl
RANLIB = ranlib
RC = windres
NOTE: These variables only represent the configuration view. The build file
template may have processed these variables further, please have a look at the
build file for more exact data:
Makefile
build file:
Makefile
build file templates:
Configurations/common0.tmpl
Configurations/unix-Makefile.tmpl
Configurations/common.tmpl
environment-variables make ssl openssl
asked Jan 9 at 16:13
Josh KirbyJosh Kirby
82
|
show 4 more comments
0
I am trying to get openssl 1.1.1 so I can use TLS 1.3 with nginx, below is my code as well as the error
Best I can figure is that LIBRPATH is empty and that would cause the issue but I can't seem to find what value I should have it set to.
Code:
tar xvf openssl-1.1.1.tar.gz
cd openssl-1.1.1
./config -Wl,--enable-new-dtags,-rpath,'$(LIBRPATH)'
make
make install
cp /usr/local/bin/openssl /usr/bin/
export LD_LIBRARY_PATH=/usr/local/lib
echo "export LD_LIBRARY_PATH=/usr/local/lib" >> ~/.bashrc
Error
./config -Wl,-rpath,'$(LIBRPATH)'
Operating system: x86_64-whatever-linux2
Configuring OpenSSL version 1.1.1 (0x1010100fL) for linux-x86_64
Using os-specific seed configuration
Creating configdata.pm
Creating Makefile
**********************************************************************
*** ***
*** If you want to report a building issue, please include the ***
*** output from this command: ***
*** ***
*** perl configdata.pm --dump ***
*** ***
**********************************************************************
Output of perl script: perl configdata.pm --dump
Command line (with current working directory = .):
/usr/bin/perl ./Configure linux-x86_64 -Wl,-rpath,$(LIBRPATH)
Perl information:
/usr/bin/perl
5.22.1 for x86_64-linux-gnu-thread-multi
Enabled features:
afalgeng
aria
asm
async
autoalginit
autoerrinit
autoload-config
bf
blake2
camellia
capieng
cast
chacha
cmac
cms
comp
ct
deprecated
des
dgram
dh
dsa
dso
dtls
dynamic-engine
ec
ec2m
ecdh
ecdsa
engine
err
filenames
gost
hw(-.+)?
idea
makedepend
md4
mdc2
multiblock
nextprotoneg
ocb
ocsp
pic
poly1305
posix-io
psk
rc2
rc4
rdrand
rfc3779
rmd160
scrypt
seed
shared
siphash
sm2
sm3
sm4
sock
srp
srtp
sse2
ssl
static-engine
stdio
tests
threads
tls
ts
ui-console
whirlpool
tls1
tls1-method
tls1_1
tls1_1-method
tls1_2
tls1_2-method
tls1_3
dtls1
dtls1-method
dtls1_2
dtls1_2-method
Disabled features:
asan [default] OPENSSL_NO_ASAN
crypto-mdebug [default] OPENSSL_NO_CRYPTO_MDEBUG
crypto-mdebug-backtrace [default] OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
devcryptoeng [default] OPENSSL_NO_DEVCRYPTOENG
ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128
egd [default] OPENSSL_NO_EGD
external-tests [default] OPENSSL_NO_EXTERNAL_TESTS
fuzz-libfuzzer [default] OPENSSL_NO_FUZZ_LIBFUZZER
fuzz-afl [default] OPENSSL_NO_FUZZ_AFL
heartbeats [default] OPENSSL_NO_HEARTBEATS
md2 [default] OPENSSL_NO_MD2 (skip crypto/md2)
msan [default] OPENSSL_NO_MSAN
rc5 [default] OPENSSL_NO_RC5 (skip crypto/rc5)
sctp [default] OPENSSL_NO_SCTP
ssl-trace [default] OPENSSL_NO_SSL_TRACE
ubsan [default] OPENSSL_NO_UBSAN
unit-test [default] OPENSSL_NO_UNIT_TEST
weak-ssl-ciphers [default] OPENSSL_NO_WEAK_SSL_CIPHERS
zlib [default]
zlib-dynamic [default]
ssl3 [default] OPENSSL_NO_SSL3
ssl3-method [default] OPENSSL_NO_SSL3_METHOD
Config target attributes:
AR => "ar",
ARFLAGS => "r",
CC => "gcc",
CFLAGS => "-Wall -O3",
CXX => "g++",
CXXFLAGS => "-Wall -O3",
HASHBANGPERL => "/usr/bin/env perl",
RANLIB => "ranlib",
RC => "windres",
aes_asm_src => "aes-x86_64.s vpaes-x86_64.s bsaes-x86_64.s aesni-x86_64.s aesni-sha1-x86_64.s aesni-sha256-x86_64.s aesni-mb-x86_64.s",
aes_obj => "aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o",
apps_aux_src => "",
apps_init_src => "",
apps_obj => "",
bf_asm_src => "bf_enc.c",
bf_obj => "bf_enc.o",
bn_asm_src => "asm/x86_64-gcc.c x86_64-mont.s x86_64-mont5.s x86_64-gf2m.s rsaz_exp.c rsaz-x86_64.s rsaz-avx2.s",
bn_obj => "asm/x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o",
bn_ops => "SIXTY_FOUR_BIT_LONG",
build_file => "Makefile",
build_scheme => [ "unified", "unix" ],
cast_asm_src => "c_enc.c",
cast_obj => "c_enc.o",
cflags => "-pthread -m64",
chacha_asm_src => "chacha-x86_64.s",
chacha_obj => "chacha-x86_64.o",
cmll_asm_src => "cmll-x86_64.s cmll_misc.c",
cmll_obj => "cmll-x86_64.o cmll_misc.o",
cppflags => "",
cpuid_asm_src => "x86_64cpuid.s",
cpuid_obj => "x86_64cpuid.o",
cxxflags => "-std=c++11 -pthread -m64",
defines => [ ],
des_asm_src => "des_enc.c fcrypt_b.c",
des_obj => "des_enc.o fcrypt_b.o",
disable => [ ],
dso_extension => ".so",
dso_scheme => "dlfcn",
ec_asm_src => "ecp_nistz256.c ecp_nistz256-x86_64.s x25519-x86_64.s",
ec_obj => "ecp_nistz256.o ecp_nistz256-x86_64.o x25519-x86_64.o",
enable => [ "afalgeng" ],
ex_libs => "-ldl -pthread",
exe_extension => "",
includes => [ ],
keccak1600_asm_src => "keccak1600-x86_64.s",
keccak1600_obj => "keccak1600-x86_64.o",
lflags => "",
lib_cflags => "",
lib_cppflags => "-DOPENSSL_USE_NODELETE -DL_ENDIAN",
lib_defines => [ ],
md5_asm_src => "md5-x86_64.s",
md5_obj => "md5-x86_64.o",
modes_asm_src => "ghash-x86_64.s aesni-gcm-x86_64.s",
modes_obj => "ghash-x86_64.o aesni-gcm-x86_64.o",
module_cflags => "-fPIC",
module_cxxflags => "",
module_ldflags => "-Wl,-znodelete -shared -Wl,-Bsymbolic",
multilib => "64",
padlock_asm_src => "e_padlock-x86_64.s",
padlock_obj => "e_padlock-x86_64.o",
perlasm_scheme => "elf",
poly1305_asm_src => "poly1305-x86_64.s",
poly1305_obj => "poly1305-x86_64.o",
rc4_asm_src => "rc4-x86_64.s rc4-md5-x86_64.s",
rc4_obj => "rc4-x86_64.o rc4-md5-x86_64.o",
rc5_asm_src => "rc5_enc.c",
rc5_obj => "rc5_enc.o",
rmd160_asm_src => "",
rmd160_obj => "",
sha1_asm_src => "sha1-x86_64.s sha256-x86_64.s sha512-x86_64.s sha1-mb-x86_64.s sha256-mb-x86_64.s",
sha1_obj => "sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o",
shared_cflag => "-fPIC",
shared_defflag => "-Wl,--version-script=",
shared_defines => [ ],
shared_extension => ".so.$(SHLIB_VERSION_NUMBER)",
shared_extension_simple => ".so",
shared_ldflag => "-Wl,-znodelete -shared -Wl,-Bsymbolic",
shared_rcflag => "",
shared_sonameflag => "-Wl,-soname=",
shared_target => "linux-shared",
thread_defines => [ ],
thread_scheme => "pthreads",
unistd => "<unistd.h>",
uplink_aux_src => "",
uplink_obj => "",
wp_asm_src => "wp-x86_64.s",
wp_obj => "wp-x86_64.o",
Recorded environment:
AR =
BUILDFILE =
CC =
CROSS_COMPILE =
CXX =
HASHBANGPERL =
OPENSSL_LOCAL_CONFIG_DIR =
PERL =
RANLIB =
RC =
WINDRES =
__CNF_CFLAGS =
__CNF_CPPDEFINES =
__CNF_CPPFLAGS =
__CNF_CPPINCLUDES =
__CNF_CXXFLAGS =
__CNF_LDFLAGS =
__CNF_LDLIBS =
Makevars:
AR = ar
ARFLAGS = r
CC = gcc
CFLAGS = -Wall -O3
CPPDEFINES =
CPPFLAGS =
CPPINCLUDES =
CXX = g++
CXXFLAGS = -Wall -O3
HASHBANGPERL = /usr/bin/env perl
LDFLAGS = -Wl,-rpath,$(LIBRPATH)
LDLIBS =
PERL = /usr/bin/perl
RANLIB = ranlib
RC = windres
NOTE: These variables only represent the configuration view. The build file
template may have processed these variables further, please have a look at the
build file for more exact data:
Makefile
build file:
Makefile
build file templates:
Configurations/common0.tmpl
Configurations/unix-Makefile.tmpl
Configurations/common.tmpl
environment-variables make ssl openssl
asked Jan 9 at 16:13
Josh KirbyJosh Kirby
82
1
"... as well as the error" - there is no error included in your "Error" output. This is just the expected output from config.
– Steffen Ullrich
Jan 9 at 16:23
@SteffenUllrich That's expected? Doesn't look like it and that is the only step that shows anything even close to an error. Rest go fine but that one does not. What could be wrong then if that is not the error? Is the ENV variable in the command that produces the 'error' meant to me blank?
– Josh Kirby
Jan 9 at 16:26
What do you mean with "What could be wrong"? You don't show any problem where something goes wrong. All you claim is "make not working" without any kind of proof and details what exactly is not working. What did you try, what did you expect and what did you get?
– Steffen Ullrich
Jan 9 at 16:28
@SteffenUllrich I thought my post was pretty straight forward, this is my commands used, this is the issue and this is the output. I expected it to have openssl work without issues which it does not. Not sure what else you would expect from those commands. I've tried the commands in the OP without luck and they seem to be standard across all online guides I have found. I get nothing when I doopenssl version
– Josh Kirby
Jan 9 at 16:44
@JoshKirby if there were errors when you ranmakeormake install, then please edit your question to include them - at the moment, all we have is the output of the./configcommand - which looks like it completed without error (ending withCreating Makefile)
– steeldriver
Jan 9 at 18:33
|
show 4 more comments
0
0
0
I am trying to get openssl 1.1.1 so I can use TLS 1.3 with nginx, below is my code as well as the error
Best I can figure is that LIBRPATH is empty and that would cause the issue but I can't seem to find what value I should have it set to.
Code:
tar xvf openssl-1.1.1.tar.gz
cd openssl-1.1.1
./config -Wl,--enable-new-dtags,-rpath,'$(LIBRPATH)'
make
make install
cp /usr/local/bin/openssl /usr/bin/
export LD_LIBRARY_PATH=/usr/local/lib
echo "export LD_LIBRARY_PATH=/usr/local/lib" >> ~/.bashrc
Error
./config -Wl,-rpath,'$(LIBRPATH)'
Operating system: x86_64-whatever-linux2
Configuring OpenSSL version 1.1.1 (0x1010100fL) for linux-x86_64
Using os-specific seed configuration
Creating configdata.pm
Creating Makefile
**********************************************************************
*** ***
*** If you want to report a building issue, please include the ***
*** output from this command: ***
*** ***
*** perl configdata.pm --dump ***
*** ***
**********************************************************************
Output of perl script: perl configdata.pm --dump
Command line (with current working directory = .):
/usr/bin/perl ./Configure linux-x86_64 -Wl,-rpath,$(LIBRPATH)
Perl information:
/usr/bin/perl
5.22.1 for x86_64-linux-gnu-thread-multi
Enabled features:
afalgeng
aria
asm
async
autoalginit
autoerrinit
autoload-config
bf
blake2
camellia
capieng
cast
chacha
cmac
cms
comp
ct
deprecated
des
dgram
dh
dsa
dso
dtls
dynamic-engine
ec
ec2m
ecdh
ecdsa
engine
err
filenames
gost
hw(-.+)?
idea
makedepend
md4
mdc2
multiblock
nextprotoneg
ocb
ocsp
pic
poly1305
posix-io
psk
rc2
rc4
rdrand
rfc3779
rmd160
scrypt
seed
shared
siphash
sm2
sm3
sm4
sock
srp
srtp
sse2
ssl
static-engine
stdio
tests
threads
tls
ts
ui-console
whirlpool
tls1
tls1-method
tls1_1
tls1_1-method
tls1_2
tls1_2-method
tls1_3
dtls1
dtls1-method
dtls1_2
dtls1_2-method
Disabled features:
asan [default] OPENSSL_NO_ASAN
crypto-mdebug [default] OPENSSL_NO_CRYPTO_MDEBUG
crypto-mdebug-backtrace [default] OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
devcryptoeng [default] OPENSSL_NO_DEVCRYPTOENG
ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128
egd [default] OPENSSL_NO_EGD
external-tests [default] OPENSSL_NO_EXTERNAL_TESTS
fuzz-libfuzzer [default] OPENSSL_NO_FUZZ_LIBFUZZER
fuzz-afl [default] OPENSSL_NO_FUZZ_AFL
heartbeats [default] OPENSSL_NO_HEARTBEATS
md2 [default] OPENSSL_NO_MD2 (skip crypto/md2)
msan [default] OPENSSL_NO_MSAN
rc5 [default] OPENSSL_NO_RC5 (skip crypto/rc5)
sctp [default] OPENSSL_NO_SCTP
ssl-trace [default] OPENSSL_NO_SSL_TRACE
ubsan [default] OPENSSL_NO_UBSAN
unit-test [default] OPENSSL_NO_UNIT_TEST
weak-ssl-ciphers [default] OPENSSL_NO_WEAK_SSL_CIPHERS
zlib [default]
zlib-dynamic [default]
ssl3 [default] OPENSSL_NO_SSL3
ssl3-method [default] OPENSSL_NO_SSL3_METHOD
Config target attributes:
AR => "ar",
ARFLAGS => "r",
CC => "gcc",
CFLAGS => "-Wall -O3",
CXX => "g++",
CXXFLAGS => "-Wall -O3",
HASHBANGPERL => "/usr/bin/env perl",
RANLIB => "ranlib",
RC => "windres",
aes_asm_src => "aes-x86_64.s vpaes-x86_64.s bsaes-x86_64.s aesni-x86_64.s aesni-sha1-x86_64.s aesni-sha256-x86_64.s aesni-mb-x86_64.s",
aes_obj => "aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o",
apps_aux_src => "",
apps_init_src => "",
apps_obj => "",
bf_asm_src => "bf_enc.c",
bf_obj => "bf_enc.o",
bn_asm_src => "asm/x86_64-gcc.c x86_64-mont.s x86_64-mont5.s x86_64-gf2m.s rsaz_exp.c rsaz-x86_64.s rsaz-avx2.s",
bn_obj => "asm/x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o",
bn_ops => "SIXTY_FOUR_BIT_LONG",
build_file => "Makefile",
build_scheme => [ "unified", "unix" ],
cast_asm_src => "c_enc.c",
cast_obj => "c_enc.o",
cflags => "-pthread -m64",
chacha_asm_src => "chacha-x86_64.s",
chacha_obj => "chacha-x86_64.o",
cmll_asm_src => "cmll-x86_64.s cmll_misc.c",
cmll_obj => "cmll-x86_64.o cmll_misc.o",
cppflags => "",
cpuid_asm_src => "x86_64cpuid.s",
cpuid_obj => "x86_64cpuid.o",
cxxflags => "-std=c++11 -pthread -m64",
defines => [ ],
des_asm_src => "des_enc.c fcrypt_b.c",
des_obj => "des_enc.o fcrypt_b.o",
disable => [ ],
dso_extension => ".so",
dso_scheme => "dlfcn",
ec_asm_src => "ecp_nistz256.c ecp_nistz256-x86_64.s x25519-x86_64.s",
ec_obj => "ecp_nistz256.o ecp_nistz256-x86_64.o x25519-x86_64.o",
enable => [ "afalgeng" ],
ex_libs => "-ldl -pthread",
exe_extension => "",
includes => [ ],
keccak1600_asm_src => "keccak1600-x86_64.s",
keccak1600_obj => "keccak1600-x86_64.o",
lflags => "",
lib_cflags => "",
lib_cppflags => "-DOPENSSL_USE_NODELETE -DL_ENDIAN",
lib_defines => [ ],
md5_asm_src => "md5-x86_64.s",
md5_obj => "md5-x86_64.o",
modes_asm_src => "ghash-x86_64.s aesni-gcm-x86_64.s",
modes_obj => "ghash-x86_64.o aesni-gcm-x86_64.o",
module_cflags => "-fPIC",
module_cxxflags => "",
module_ldflags => "-Wl,-znodelete -shared -Wl,-Bsymbolic",
multilib => "64",
padlock_asm_src => "e_padlock-x86_64.s",
padlock_obj => "e_padlock-x86_64.o",
perlasm_scheme => "elf",
poly1305_asm_src => "poly1305-x86_64.s",
poly1305_obj => "poly1305-x86_64.o",
rc4_asm_src => "rc4-x86_64.s rc4-md5-x86_64.s",
rc4_obj => "rc4-x86_64.o rc4-md5-x86_64.o",
rc5_asm_src => "rc5_enc.c",
rc5_obj => "rc5_enc.o",
rmd160_asm_src => "",
rmd160_obj => "",
sha1_asm_src => "sha1-x86_64.s sha256-x86_64.s sha512-x86_64.s sha1-mb-x86_64.s sha256-mb-x86_64.s",
sha1_obj => "sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o",
shared_cflag => "-fPIC",
shared_defflag => "-Wl,--version-script=",
shared_defines => [ ],
shared_extension => ".so.$(SHLIB_VERSION_NUMBER)",
shared_extension_simple => ".so",
shared_ldflag => "-Wl,-znodelete -shared -Wl,-Bsymbolic",
shared_rcflag => "",
shared_sonameflag => "-Wl,-soname=",
shared_target => "linux-shared",
thread_defines => [ ],
thread_scheme => "pthreads",
unistd => "<unistd.h>",
uplink_aux_src => "",
uplink_obj => "",
wp_asm_src => "wp-x86_64.s",
wp_obj => "wp-x86_64.o",
Recorded environment:
AR =
BUILDFILE =
CC =
CROSS_COMPILE =
CXX =
HASHBANGPERL =
OPENSSL_LOCAL_CONFIG_DIR =
PERL =
RANLIB =
RC =
WINDRES =
__CNF_CFLAGS =
__CNF_CPPDEFINES =
__CNF_CPPFLAGS =
__CNF_CPPINCLUDES =
__CNF_CXXFLAGS =
__CNF_LDFLAGS =
__CNF_LDLIBS =
Makevars:
AR = ar
ARFLAGS = r
CC = gcc
CFLAGS = -Wall -O3
CPPDEFINES =
CPPFLAGS =
CPPINCLUDES =
CXX = g++
CXXFLAGS = -Wall -O3
HASHBANGPERL = /usr/bin/env perl
LDFLAGS = -Wl,-rpath,$(LIBRPATH)
LDLIBS =
PERL = /usr/bin/perl
RANLIB = ranlib
RC = windres
NOTE: These variables only represent the configuration view. The build file
template may have processed these variables further, please have a look at the
build file for more exact data:
Makefile
build file:
Makefile
build file templates:
Configurations/common0.tmpl
Configurations/unix-Makefile.tmpl
Configurations/common.tmpl
environment-variables make ssl openssl
asked Jan 9 at 16:13
Josh KirbyJosh Kirby
82
I am trying to get openssl 1.1.1 so I can use TLS 1.3 with nginx, below is my code as well as the error
Best I can figure is that LIBRPATH is empty and that would cause the issue but I can't seem to find what value I should have it set to.
Code:
tar xvf openssl-1.1.1.tar.gz
cd openssl-1.1.1
./config -Wl,--enable-new-dtags,-rpath,'$(LIBRPATH)'
make
make install
cp /usr/local/bin/openssl /usr/bin/
export LD_LIBRARY_PATH=/usr/local/lib
echo "export LD_LIBRARY_PATH=/usr/local/lib" >> ~/.bashrc
Error
./config -Wl,-rpath,'$(LIBRPATH)'
Operating system: x86_64-whatever-linux2
Configuring OpenSSL version 1.1.1 (0x1010100fL) for linux-x86_64
Using os-specific seed configuration
Creating configdata.pm
Creating Makefile
**********************************************************************
*** ***
*** If you want to report a building issue, please include the ***
*** output from this command: ***
*** ***
*** perl configdata.pm --dump ***
*** ***
**********************************************************************
Output of perl script: perl configdata.pm --dump
Command line (with current working directory = .):
/usr/bin/perl ./Configure linux-x86_64 -Wl,-rpath,$(LIBRPATH)
Perl information:
/usr/bin/perl
5.22.1 for x86_64-linux-gnu-thread-multi
Enabled features:
afalgeng
aria
asm
async
autoalginit
autoerrinit
autoload-config
bf
blake2
camellia
capieng
cast
chacha
cmac
cms
comp
ct
deprecated
des
dgram
dh
dsa
dso
dtls
dynamic-engine
ec
ec2m
ecdh
ecdsa
engine
err
filenames
gost
hw(-.+)?
idea
makedepend
md4
mdc2
multiblock
nextprotoneg
ocb
ocsp
pic
poly1305
posix-io
psk
rc2
rc4
rdrand
rfc3779
rmd160
scrypt
seed
shared
siphash
sm2
sm3
sm4
sock
srp
srtp
sse2
ssl
static-engine
stdio
tests
threads
tls
ts
ui-console
whirlpool
tls1
tls1-method
tls1_1
tls1_1-method
tls1_2
tls1_2-method
tls1_3
dtls1
dtls1-method
dtls1_2
dtls1_2-method
Disabled features:
asan [default] OPENSSL_NO_ASAN
crypto-mdebug [default] OPENSSL_NO_CRYPTO_MDEBUG
crypto-mdebug-backtrace [default] OPENSSL_NO_CRYPTO_MDEBUG_BACKTRACE
devcryptoeng [default] OPENSSL_NO_DEVCRYPTOENG
ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128
egd [default] OPENSSL_NO_EGD
external-tests [default] OPENSSL_NO_EXTERNAL_TESTS
fuzz-libfuzzer [default] OPENSSL_NO_FUZZ_LIBFUZZER
fuzz-afl [default] OPENSSL_NO_FUZZ_AFL
heartbeats [default] OPENSSL_NO_HEARTBEATS
md2 [default] OPENSSL_NO_MD2 (skip crypto/md2)
msan [default] OPENSSL_NO_MSAN
rc5 [default] OPENSSL_NO_RC5 (skip crypto/rc5)
sctp [default] OPENSSL_NO_SCTP
ssl-trace [default] OPENSSL_NO_SSL_TRACE
ubsan [default] OPENSSL_NO_UBSAN
unit-test [default] OPENSSL_NO_UNIT_TEST
weak-ssl-ciphers [default] OPENSSL_NO_WEAK_SSL_CIPHERS
zlib [default]
zlib-dynamic [default]
ssl3 [default] OPENSSL_NO_SSL3
ssl3-method [default] OPENSSL_NO_SSL3_METHOD
Config target attributes:
AR => "ar",
ARFLAGS => "r",
CC => "gcc",
CFLAGS => "-Wall -O3",
CXX => "g++",
CXXFLAGS => "-Wall -O3",
HASHBANGPERL => "/usr/bin/env perl",
RANLIB => "ranlib",
RC => "windres",
aes_asm_src => "aes-x86_64.s vpaes-x86_64.s bsaes-x86_64.s aesni-x86_64.s aesni-sha1-x86_64.s aesni-sha256-x86_64.s aesni-mb-x86_64.s",
aes_obj => "aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o",
apps_aux_src => "",
apps_init_src => "",
apps_obj => "",
bf_asm_src => "bf_enc.c",
bf_obj => "bf_enc.o",
bn_asm_src => "asm/x86_64-gcc.c x86_64-mont.s x86_64-mont5.s x86_64-gf2m.s rsaz_exp.c rsaz-x86_64.s rsaz-avx2.s",
bn_obj => "asm/x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o",
bn_ops => "SIXTY_FOUR_BIT_LONG",
build_file => "Makefile",
build_scheme => [ "unified", "unix" ],
cast_asm_src => "c_enc.c",
cast_obj => "c_enc.o",
cflags => "-pthread -m64",
chacha_asm_src => "chacha-x86_64.s",
chacha_obj => "chacha-x86_64.o",
cmll_asm_src => "cmll-x86_64.s cmll_misc.c",
cmll_obj => "cmll-x86_64.o cmll_misc.o",
cppflags => "",
cpuid_asm_src => "x86_64cpuid.s",
cpuid_obj => "x86_64cpuid.o",
cxxflags => "-std=c++11 -pthread -m64",
defines => [ ],
des_asm_src => "des_enc.c fcrypt_b.c",
des_obj => "des_enc.o fcrypt_b.o",
disable => [ ],
dso_extension => ".so",
dso_scheme => "dlfcn",
ec_asm_src => "ecp_nistz256.c ecp_nistz256-x86_64.s x25519-x86_64.s",
ec_obj => "ecp_nistz256.o ecp_nistz256-x86_64.o x25519-x86_64.o",
enable => [ "afalgeng" ],
ex_libs => "-ldl -pthread",
exe_extension => "",
includes => [ ],
keccak1600_asm_src => "keccak1600-x86_64.s",
keccak1600_obj => "keccak1600-x86_64.o",
lflags => "",
lib_cflags => "",
lib_cppflags => "-DOPENSSL_USE_NODELETE -DL_ENDIAN",
lib_defines => [ ],
md5_asm_src => "md5-x86_64.s",
md5_obj => "md5-x86_64.o",
modes_asm_src => "ghash-x86_64.s aesni-gcm-x86_64.s",
modes_obj => "ghash-x86_64.o aesni-gcm-x86_64.o",
module_cflags => "-fPIC",
module_cxxflags => "",
module_ldflags => "-Wl,-znodelete -shared -Wl,-Bsymbolic",
multilib => "64",
padlock_asm_src => "e_padlock-x86_64.s",
padlock_obj => "e_padlock-x86_64.o",
perlasm_scheme => "elf",
poly1305_asm_src => "poly1305-x86_64.s",
poly1305_obj => "poly1305-x86_64.o",
rc4_asm_src => "rc4-x86_64.s rc4-md5-x86_64.s",
rc4_obj => "rc4-x86_64.o rc4-md5-x86_64.o",
rc5_asm_src => "rc5_enc.c",
rc5_obj => "rc5_enc.o",
rmd160_asm_src => "",
rmd160_obj => "",
sha1_asm_src => "sha1-x86_64.s sha256-x86_64.s sha512-x86_64.s sha1-mb-x86_64.s sha256-mb-x86_64.s",
sha1_obj => "sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o",
shared_cflag => "-fPIC",
shared_defflag => "-Wl,--version-script=",
shared_defines => [ ],
shared_extension => ".so.$(SHLIB_VERSION_NUMBER)",
shared_extension_simple => ".so",
shared_ldflag => "-Wl,-znodelete -shared -Wl,-Bsymbolic",
shared_rcflag => "",
shared_sonameflag => "-Wl,-soname=",
shared_target => "linux-shared",
thread_defines => [ ],
thread_scheme => "pthreads",
unistd => "<unistd.h>",
uplink_aux_src => "",
uplink_obj => "",
wp_asm_src => "wp-x86_64.s",
wp_obj => "wp-x86_64.o",
Recorded environment:
AR =
BUILDFILE =
CC =
CROSS_COMPILE =
CXX =
HASHBANGPERL =
OPENSSL_LOCAL_CONFIG_DIR =
PERL =
RANLIB =
RC =
WINDRES =
__CNF_CFLAGS =
__CNF_CPPDEFINES =
__CNF_CPPFLAGS =
__CNF_CPPINCLUDES =
__CNF_CXXFLAGS =
__CNF_LDFLAGS =
__CNF_LDLIBS =
Makevars:
AR = ar
ARFLAGS = r
CC = gcc
CFLAGS = -Wall -O3
CPPDEFINES =
CPPFLAGS =
CPPINCLUDES =
CXX = g++
CXXFLAGS = -Wall -O3
HASHBANGPERL = /usr/bin/env perl
LDFLAGS = -Wl,-rpath,$(LIBRPATH)
LDLIBS =
PERL = /usr/bin/perl
RANLIB = ranlib
RC = windres
NOTE: These variables only represent the configuration view. The build file
template may have processed these variables further, please have a look at the
build file for more exact data:
Makefile
build file:
Makefile
build file templates:
Configurations/common0.tmpl
Configurations/unix-Makefile.tmpl
Configurations/common.tmpl
environment-variables make ssl openssl
environment-variables make ssl openssl
asked Jan 9 at 16:13
Josh KirbyJosh Kirby
82
asked Jan 9 at 16:13
Josh KirbyJosh Kirby
82
asked Jan 9 at 16:13
Josh KirbyJosh Kirby
82
asked Jan 9 at 16:13
Josh KirbyJosh Kirby
82
asked Jan 9 at 16:13
Josh KirbyJosh Kirby
82
82
1
"... as well as the error" - there is no error included in your "Error" output. This is just the expected output from config.
– Steffen Ullrich
Jan 9 at 16:23
@SteffenUllrich That's expected? Doesn't look like it and that is the only step that shows anything even close to an error. Rest go fine but that one does not. What could be wrong then if that is not the error? Is the ENV variable in the command that produces the 'error' meant to me blank?
– Josh Kirby
Jan 9 at 16:26
What do you mean with "What could be wrong"? You don't show any problem where something goes wrong. All you claim is "make not working" without any kind of proof and details what exactly is not working. What did you try, what did you expect and what did you get?
– Steffen Ullrich
Jan 9 at 16:28
@SteffenUllrich I thought my post was pretty straight forward, this is my commands used, this is the issue and this is the output. I expected it to have openssl work without issues which it does not. Not sure what else you would expect from those commands. I've tried the commands in the OP without luck and they seem to be standard across all online guides I have found. I get nothing when I doopenssl version
– Josh Kirby
Jan 9 at 16:44
@JoshKirby if there were errors when you ranmakeormake install, then please edit your question to include them - at the moment, all we have is the output of the./configcommand - which looks like it completed without error (ending withCreating Makefile)
– steeldriver
Jan 9 at 18:33
|
show 4 more comments
1
"... as well as the error" - there is no error included in your "Error" output. This is just the expected output from config.
– Steffen Ullrich
Jan 9 at 16:23
@SteffenUllrich That's expected? Doesn't look like it and that is the only step that shows anything even close to an error. Rest go fine but that one does not. What could be wrong then if that is not the error? Is the ENV variable in the command that produces the 'error' meant to me blank?
– Josh Kirby
Jan 9 at 16:26
What do you mean with "What could be wrong"? You don't show any problem where something goes wrong. All you claim is "make not working" without any kind of proof and details what exactly is not working. What did you try, what did you expect and what did you get?
– Steffen Ullrich
Jan 9 at 16:28
@SteffenUllrich I thought my post was pretty straight forward, this is my commands used, this is the issue and this is the output. I expected it to have openssl work without issues which it does not. Not sure what else you would expect from those commands. I've tried the commands in the OP without luck and they seem to be standard across all online guides I have found. I get nothing when I doopenssl version
– Josh Kirby
Jan 9 at 16:44
@JoshKirby if there were errors when you ranmakeormake install, then please edit your question to include them - at the moment, all we have is the output of the./configcommand - which looks like it completed without error (ending withCreating Makefile)
– steeldriver
Jan 9 at 18:33
1
1
"... as well as the error" - there is no error included in your "Error" output. This is just the expected output from config.
– Steffen Ullrich
Jan 9 at 16:23
"... as well as the error" - there is no error included in your "Error" output. This is just the expected output from config.
– Steffen Ullrich
Jan 9 at 16:23
@SteffenUllrich That's expected? Doesn't look like it and that is the only step that shows anything even close to an error. Rest go fine but that one does not. What could be wrong then if that is not the error? Is the ENV variable in the command that produces the 'error' meant to me blank?
– Josh Kirby
Jan 9 at 16:26
@SteffenUllrich That's expected? Doesn't look like it and that is the only step that shows anything even close to an error. Rest go fine but that one does not. What could be wrong then if that is not the error? Is the ENV variable in the command that produces the 'error' meant to me blank?
– Josh Kirby
Jan 9 at 16:26
What do you mean with "What could be wrong"? You don't show any problem where something goes wrong. All you claim is "make not working" without any kind of proof and details what exactly is not working. What did you try, what did you expect and what did you get?
– Steffen Ullrich
Jan 9 at 16:28
What do you mean with "What could be wrong"? You don't show any problem where something goes wrong. All you claim is "make not working" without any kind of proof and details what exactly is not working. What did you try, what did you expect and what did you get?
– Steffen Ullrich
Jan 9 at 16:28
@SteffenUllrich I thought my post was pretty straight forward, this is my commands used, this is the issue and this is the output. I expected it to have openssl work without issues which it does not. Not sure what else you would expect from those commands. I've tried the commands in the OP without luck and they seem to be standard across all online guides I have found. I get nothing when I do
openssl version– Josh Kirby
Jan 9 at 16:44
@SteffenUllrich I thought my post was pretty straight forward, this is my commands used, this is the issue and this is the output. I expected it to have openssl work without issues which it does not. Not sure what else you would expect from those commands. I've tried the commands in the OP without luck and they seem to be standard across all online guides I have found. I get nothing when I do
openssl version– Josh Kirby
Jan 9 at 16:44
@JoshKirby if there were errors when you ran
make or make install, then please edit your question to include them - at the moment, all we have is the output of the ./config command - which looks like it completed without error (ending with Creating Makefile)– steeldriver
Jan 9 at 18:33
@JoshKirby if there were errors when you ran
make or make install, then please edit your question to include them - at the moment, all we have is the output of the ./config command - which looks like it completed without error (ending with Creating Makefile)– steeldriver
Jan 9 at 18:33
|
show 4 more comments
0
active
oldest
votes
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1108335%2fopen-ssl-make-not-working%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
draft saved
draft discarded
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1108335%2fopen-ssl-make-not-working%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
1
"... as well as the error" - there is no error included in your "Error" output. This is just the expected output from config.
– Steffen Ullrich
Jan 9 at 16:23
@SteffenUllrich That's expected? Doesn't look like it and that is the only step that shows anything even close to an error. Rest go fine but that one does not. What could be wrong then if that is not the error? Is the ENV variable in the command that produces the 'error' meant to me blank?
– Josh Kirby
Jan 9 at 16:26
What do you mean with "What could be wrong"? You don't show any problem where something goes wrong. All you claim is "make not working" without any kind of proof and details what exactly is not working. What did you try, what did you expect and what did you get?
– Steffen Ullrich
Jan 9 at 16:28
@SteffenUllrich I thought my post was pretty straight forward, this is my commands used, this is the issue and this is the output. I expected it to have openssl work without issues which it does not. Not sure what else you would expect from those commands. I've tried the commands in the OP without luck and they seem to be standard across all online guides I have found. I get nothing when I do
openssl version– Josh Kirby
Jan 9 at 16:44
@JoshKirby if there were errors when you ran
makeormake install, then please edit your question to include them - at the moment, all we have is the output of the./configcommand - which looks like it completed without error (ending withCreating Makefile)– steeldriver
Jan 9 at 18:33