windows 10 iso on usb refuses to boot












8















I am using a windows "standard" ISO file: Win10_1511_1_English_x64.iso and I have verified its md5 matches the expected. The iso is mountable in OS X as a "UDF" format.



I then copy it "straight" to my USB drive, like:



sudo dd if=Win10_1511_1_English_x64.iso of=/dev/rdisk1 bs=1m



then plug it into my dell optiplex 780 (a little old, I know), enable booting from USB device in the BIOS, and choose it, and all I get is:



No boot device available - strike F1 to retry boot ...



What am I doing wrong?



The created USB is readable in OS X, but in other windows boxes, it just says "You need to format the disk in Drive E: before you can use it." So it doesn't boot, nor can windows read it...



Update: I ran the OS X "Boot Camp Assistant" (check the box "Create a Windows 7 or later version install disk" and gave it the same ISO file), then it magically boot fine (appears to be formatted FAT32). Maybe it's some special Dell limitation they can only boot on USB if it's FAT32? Why would it not boot from straight UDF?










share|improve this question





























    8















    I am using a windows "standard" ISO file: Win10_1511_1_English_x64.iso and I have verified its md5 matches the expected. The iso is mountable in OS X as a "UDF" format.



    I then copy it "straight" to my USB drive, like:



    sudo dd if=Win10_1511_1_English_x64.iso of=/dev/rdisk1 bs=1m



    then plug it into my dell optiplex 780 (a little old, I know), enable booting from USB device in the BIOS, and choose it, and all I get is:



    No boot device available - strike F1 to retry boot ...



    What am I doing wrong?



    The created USB is readable in OS X, but in other windows boxes, it just says "You need to format the disk in Drive E: before you can use it." So it doesn't boot, nor can windows read it...



    Update: I ran the OS X "Boot Camp Assistant" (check the box "Create a Windows 7 or later version install disk" and gave it the same ISO file), then it magically boot fine (appears to be formatted FAT32). Maybe it's some special Dell limitation they can only boot on USB if it's FAT32? Why would it not boot from straight UDF?










    share|improve this question



























      8












      8








      8


      3






      I am using a windows "standard" ISO file: Win10_1511_1_English_x64.iso and I have verified its md5 matches the expected. The iso is mountable in OS X as a "UDF" format.



      I then copy it "straight" to my USB drive, like:



      sudo dd if=Win10_1511_1_English_x64.iso of=/dev/rdisk1 bs=1m



      then plug it into my dell optiplex 780 (a little old, I know), enable booting from USB device in the BIOS, and choose it, and all I get is:



      No boot device available - strike F1 to retry boot ...



      What am I doing wrong?



      The created USB is readable in OS X, but in other windows boxes, it just says "You need to format the disk in Drive E: before you can use it." So it doesn't boot, nor can windows read it...



      Update: I ran the OS X "Boot Camp Assistant" (check the box "Create a Windows 7 or later version install disk" and gave it the same ISO file), then it magically boot fine (appears to be formatted FAT32). Maybe it's some special Dell limitation they can only boot on USB if it's FAT32? Why would it not boot from straight UDF?










      share|improve this question
















      I am using a windows "standard" ISO file: Win10_1511_1_English_x64.iso and I have verified its md5 matches the expected. The iso is mountable in OS X as a "UDF" format.



      I then copy it "straight" to my USB drive, like:



      sudo dd if=Win10_1511_1_English_x64.iso of=/dev/rdisk1 bs=1m



      then plug it into my dell optiplex 780 (a little old, I know), enable booting from USB device in the BIOS, and choose it, and all I get is:



      No boot device available - strike F1 to retry boot ...



      What am I doing wrong?



      The created USB is readable in OS X, but in other windows boxes, it just says "You need to format the disk in Drive E: before you can use it." So it doesn't boot, nor can windows read it...



      Update: I ran the OS X "Boot Camp Assistant" (check the box "Create a Windows 7 or later version install disk" and gave it the same ISO file), then it magically boot fine (appears to be formatted FAT32). Maybe it's some special Dell limitation they can only boot on USB if it's FAT32? Why would it not boot from straight UDF?







      boot usb-flash-drive iso-image






      share|improve this question















      share|improve this question













      share|improve this question




      share|improve this question








      edited Dec 7 '18 at 21:27







      rogerdpack

















      asked Apr 8 '16 at 22:16









      rogerdpackrogerdpack

      86821428




      86821428






















          1 Answer
          1






          active

          oldest

          votes


















          7














          I cannot seem to find an official source for it, but it appears that "UDF" if copied verbatim, cannot be booted from USB. And many ISO files are UDF formatted.



          Appears that for "cd rom drives" being able to boot from them is accomplished by their conforming to the El Torito standard.
          However for "normal" disk to boot, the "MBR" has to be set in it (which is apparently different bits than the El Torito bits). And apparently you can set one or the other, or both.



          So basically, if it's an ISO that's "just" El Torito, you "have" to use a tool (or carefully do the formatting, partition marking, and file copying manually), that will give you a MBR formatted, bootable USB. Copying raw ISO bits is not enough.



          A "few" ISO's may not need any special tool: (note the mention of "isohybrid," whose documentation mentions that normal ISO's (UDF formatted) are only bootable from CD drives unless you add an extra master boot record [i.e. outside of UDF spec], apparently many main-line linux distro ISO's are made this special way, but I know from experience windows install ISO's of at least windows 10 are not).



          For the ones that do need it, apparently you should avoid raw disk copies from ISO to USB (ex: the dd command on unix*'s). Or you'll run into the problem I did.



          In my experience, typically you'll be converting from a UDF ISO to a FAT32 USB device. (The former is El torito, the latter MBR, for their "boot system").



          How do I place a bootable ISO on a USB drive? (lists lots of utilities that do this "for you")



          See also https://apple.stackexchange.com/a/234290/25085 for OS X related options.



          related:



          https://blogs.msdn.microsoft.com/matt-harrington/2012/03/27/how-to-create-a-bootable-usb-drive-from-an-iso-image-for-uefi-systems/ (mentions that it needs to be FAT32, and have files copied from the ISO).



          update:
          No amount of unetbootin seemed to work for me, bootcamp neither on newer iso's. I'm guessing I was installing to an older box which couldn't read newere boot schemes. Using rufus on windows "MBR" and "NTFS" (fat32 might have worked as well, but got some complaints of "install.win" being too big) and it worked for a windows 10 iso.






          share|improve this answer





















          • 1





            Every windows bootable usb installer I have made since Vista has been fat32, not sure it is a Dell issue though.

            – Moab
            Apr 8 '16 at 22:25








          • 2





            The answer is quite right except all the bits about UDF. The issue doesn't really have anything to do with ISO9660 vs UDF (and neither is ISO files are almost all UDF formatted true). It's about whether the ISO is made purely as per El Torito or "hybridly" including an MBR.

            – Tom Yan
            Apr 9 '16 at 9:14











          • @TomYan ahh that explains it, thanks! I tried to update it.

            – rogerdpack
            Apr 10 '16 at 1:55











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "3"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1063220%2fwindows-10-iso-on-usb-refuses-to-boot%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          7














          I cannot seem to find an official source for it, but it appears that "UDF" if copied verbatim, cannot be booted from USB. And many ISO files are UDF formatted.



          Appears that for "cd rom drives" being able to boot from them is accomplished by their conforming to the El Torito standard.
          However for "normal" disk to boot, the "MBR" has to be set in it (which is apparently different bits than the El Torito bits). And apparently you can set one or the other, or both.



          So basically, if it's an ISO that's "just" El Torito, you "have" to use a tool (or carefully do the formatting, partition marking, and file copying manually), that will give you a MBR formatted, bootable USB. Copying raw ISO bits is not enough.



          A "few" ISO's may not need any special tool: (note the mention of "isohybrid," whose documentation mentions that normal ISO's (UDF formatted) are only bootable from CD drives unless you add an extra master boot record [i.e. outside of UDF spec], apparently many main-line linux distro ISO's are made this special way, but I know from experience windows install ISO's of at least windows 10 are not).



          For the ones that do need it, apparently you should avoid raw disk copies from ISO to USB (ex: the dd command on unix*'s). Or you'll run into the problem I did.



          In my experience, typically you'll be converting from a UDF ISO to a FAT32 USB device. (The former is El torito, the latter MBR, for their "boot system").



          How do I place a bootable ISO on a USB drive? (lists lots of utilities that do this "for you")



          See also https://apple.stackexchange.com/a/234290/25085 for OS X related options.



          related:



          https://blogs.msdn.microsoft.com/matt-harrington/2012/03/27/how-to-create-a-bootable-usb-drive-from-an-iso-image-for-uefi-systems/ (mentions that it needs to be FAT32, and have files copied from the ISO).



          update:
          No amount of unetbootin seemed to work for me, bootcamp neither on newer iso's. I'm guessing I was installing to an older box which couldn't read newere boot schemes. Using rufus on windows "MBR" and "NTFS" (fat32 might have worked as well, but got some complaints of "install.win" being too big) and it worked for a windows 10 iso.






          share|improve this answer





















          • 1





            Every windows bootable usb installer I have made since Vista has been fat32, not sure it is a Dell issue though.

            – Moab
            Apr 8 '16 at 22:25








          • 2





            The answer is quite right except all the bits about UDF. The issue doesn't really have anything to do with ISO9660 vs UDF (and neither is ISO files are almost all UDF formatted true). It's about whether the ISO is made purely as per El Torito or "hybridly" including an MBR.

            – Tom Yan
            Apr 9 '16 at 9:14











          • @TomYan ahh that explains it, thanks! I tried to update it.

            – rogerdpack
            Apr 10 '16 at 1:55
















          7














          I cannot seem to find an official source for it, but it appears that "UDF" if copied verbatim, cannot be booted from USB. And many ISO files are UDF formatted.



          Appears that for "cd rom drives" being able to boot from them is accomplished by their conforming to the El Torito standard.
          However for "normal" disk to boot, the "MBR" has to be set in it (which is apparently different bits than the El Torito bits). And apparently you can set one or the other, or both.



          So basically, if it's an ISO that's "just" El Torito, you "have" to use a tool (or carefully do the formatting, partition marking, and file copying manually), that will give you a MBR formatted, bootable USB. Copying raw ISO bits is not enough.



          A "few" ISO's may not need any special tool: (note the mention of "isohybrid," whose documentation mentions that normal ISO's (UDF formatted) are only bootable from CD drives unless you add an extra master boot record [i.e. outside of UDF spec], apparently many main-line linux distro ISO's are made this special way, but I know from experience windows install ISO's of at least windows 10 are not).



          For the ones that do need it, apparently you should avoid raw disk copies from ISO to USB (ex: the dd command on unix*'s). Or you'll run into the problem I did.



          In my experience, typically you'll be converting from a UDF ISO to a FAT32 USB device. (The former is El torito, the latter MBR, for their "boot system").



          How do I place a bootable ISO on a USB drive? (lists lots of utilities that do this "for you")



          See also https://apple.stackexchange.com/a/234290/25085 for OS X related options.



          related:



          https://blogs.msdn.microsoft.com/matt-harrington/2012/03/27/how-to-create-a-bootable-usb-drive-from-an-iso-image-for-uefi-systems/ (mentions that it needs to be FAT32, and have files copied from the ISO).



          update:
          No amount of unetbootin seemed to work for me, bootcamp neither on newer iso's. I'm guessing I was installing to an older box which couldn't read newere boot schemes. Using rufus on windows "MBR" and "NTFS" (fat32 might have worked as well, but got some complaints of "install.win" being too big) and it worked for a windows 10 iso.






          share|improve this answer





















          • 1





            Every windows bootable usb installer I have made since Vista has been fat32, not sure it is a Dell issue though.

            – Moab
            Apr 8 '16 at 22:25








          • 2





            The answer is quite right except all the bits about UDF. The issue doesn't really have anything to do with ISO9660 vs UDF (and neither is ISO files are almost all UDF formatted true). It's about whether the ISO is made purely as per El Torito or "hybridly" including an MBR.

            – Tom Yan
            Apr 9 '16 at 9:14











          • @TomYan ahh that explains it, thanks! I tried to update it.

            – rogerdpack
            Apr 10 '16 at 1:55














          7












          7








          7







          I cannot seem to find an official source for it, but it appears that "UDF" if copied verbatim, cannot be booted from USB. And many ISO files are UDF formatted.



          Appears that for "cd rom drives" being able to boot from them is accomplished by their conforming to the El Torito standard.
          However for "normal" disk to boot, the "MBR" has to be set in it (which is apparently different bits than the El Torito bits). And apparently you can set one or the other, or both.



          So basically, if it's an ISO that's "just" El Torito, you "have" to use a tool (or carefully do the formatting, partition marking, and file copying manually), that will give you a MBR formatted, bootable USB. Copying raw ISO bits is not enough.



          A "few" ISO's may not need any special tool: (note the mention of "isohybrid," whose documentation mentions that normal ISO's (UDF formatted) are only bootable from CD drives unless you add an extra master boot record [i.e. outside of UDF spec], apparently many main-line linux distro ISO's are made this special way, but I know from experience windows install ISO's of at least windows 10 are not).



          For the ones that do need it, apparently you should avoid raw disk copies from ISO to USB (ex: the dd command on unix*'s). Or you'll run into the problem I did.



          In my experience, typically you'll be converting from a UDF ISO to a FAT32 USB device. (The former is El torito, the latter MBR, for their "boot system").



          How do I place a bootable ISO on a USB drive? (lists lots of utilities that do this "for you")



          See also https://apple.stackexchange.com/a/234290/25085 for OS X related options.



          related:



          https://blogs.msdn.microsoft.com/matt-harrington/2012/03/27/how-to-create-a-bootable-usb-drive-from-an-iso-image-for-uefi-systems/ (mentions that it needs to be FAT32, and have files copied from the ISO).



          update:
          No amount of unetbootin seemed to work for me, bootcamp neither on newer iso's. I'm guessing I was installing to an older box which couldn't read newere boot schemes. Using rufus on windows "MBR" and "NTFS" (fat32 might have worked as well, but got some complaints of "install.win" being too big) and it worked for a windows 10 iso.






          share|improve this answer















          I cannot seem to find an official source for it, but it appears that "UDF" if copied verbatim, cannot be booted from USB. And many ISO files are UDF formatted.



          Appears that for "cd rom drives" being able to boot from them is accomplished by their conforming to the El Torito standard.
          However for "normal" disk to boot, the "MBR" has to be set in it (which is apparently different bits than the El Torito bits). And apparently you can set one or the other, or both.



          So basically, if it's an ISO that's "just" El Torito, you "have" to use a tool (or carefully do the formatting, partition marking, and file copying manually), that will give you a MBR formatted, bootable USB. Copying raw ISO bits is not enough.



          A "few" ISO's may not need any special tool: (note the mention of "isohybrid," whose documentation mentions that normal ISO's (UDF formatted) are only bootable from CD drives unless you add an extra master boot record [i.e. outside of UDF spec], apparently many main-line linux distro ISO's are made this special way, but I know from experience windows install ISO's of at least windows 10 are not).



          For the ones that do need it, apparently you should avoid raw disk copies from ISO to USB (ex: the dd command on unix*'s). Or you'll run into the problem I did.



          In my experience, typically you'll be converting from a UDF ISO to a FAT32 USB device. (The former is El torito, the latter MBR, for their "boot system").



          How do I place a bootable ISO on a USB drive? (lists lots of utilities that do this "for you")



          See also https://apple.stackexchange.com/a/234290/25085 for OS X related options.



          related:



          https://blogs.msdn.microsoft.com/matt-harrington/2012/03/27/how-to-create-a-bootable-usb-drive-from-an-iso-image-for-uefi-systems/ (mentions that it needs to be FAT32, and have files copied from the ISO).



          update:
          No amount of unetbootin seemed to work for me, bootcamp neither on newer iso's. I'm guessing I was installing to an older box which couldn't read newere boot schemes. Using rufus on windows "MBR" and "NTFS" (fat32 might have worked as well, but got some complaints of "install.win" being too big) and it worked for a windows 10 iso.







          share|improve this answer














          share|improve this answer



          share|improve this answer








          edited Jan 15 at 14:37

























          answered Apr 8 '16 at 22:16









          rogerdpackrogerdpack

          86821428




          86821428








          • 1





            Every windows bootable usb installer I have made since Vista has been fat32, not sure it is a Dell issue though.

            – Moab
            Apr 8 '16 at 22:25








          • 2





            The answer is quite right except all the bits about UDF. The issue doesn't really have anything to do with ISO9660 vs UDF (and neither is ISO files are almost all UDF formatted true). It's about whether the ISO is made purely as per El Torito or "hybridly" including an MBR.

            – Tom Yan
            Apr 9 '16 at 9:14











          • @TomYan ahh that explains it, thanks! I tried to update it.

            – rogerdpack
            Apr 10 '16 at 1:55














          • 1





            Every windows bootable usb installer I have made since Vista has been fat32, not sure it is a Dell issue though.

            – Moab
            Apr 8 '16 at 22:25








          • 2





            The answer is quite right except all the bits about UDF. The issue doesn't really have anything to do with ISO9660 vs UDF (and neither is ISO files are almost all UDF formatted true). It's about whether the ISO is made purely as per El Torito or "hybridly" including an MBR.

            – Tom Yan
            Apr 9 '16 at 9:14











          • @TomYan ahh that explains it, thanks! I tried to update it.

            – rogerdpack
            Apr 10 '16 at 1:55








          1




          1





          Every windows bootable usb installer I have made since Vista has been fat32, not sure it is a Dell issue though.

          – Moab
          Apr 8 '16 at 22:25







          Every windows bootable usb installer I have made since Vista has been fat32, not sure it is a Dell issue though.

          – Moab
          Apr 8 '16 at 22:25






          2




          2





          The answer is quite right except all the bits about UDF. The issue doesn't really have anything to do with ISO9660 vs UDF (and neither is ISO files are almost all UDF formatted true). It's about whether the ISO is made purely as per El Torito or "hybridly" including an MBR.

          – Tom Yan
          Apr 9 '16 at 9:14





          The answer is quite right except all the bits about UDF. The issue doesn't really have anything to do with ISO9660 vs UDF (and neither is ISO files are almost all UDF formatted true). It's about whether the ISO is made purely as per El Torito or "hybridly" including an MBR.

          – Tom Yan
          Apr 9 '16 at 9:14













          @TomYan ahh that explains it, thanks! I tried to update it.

          – rogerdpack
          Apr 10 '16 at 1:55





          @TomYan ahh that explains it, thanks! I tried to update it.

          – rogerdpack
          Apr 10 '16 at 1:55


















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Super User!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1063220%2fwindows-10-iso-on-usb-refuses-to-boot%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          How to make a Squid Proxy server?

          Is this a new Fibonacci Identity?

          19世紀