Ubuntu 16.04 and 18.04 crash with cuda 9.0 [closed]
I am running Ubuntu 16.04 on a Dell XPS 15 with an Nvidia GTX1050i graphics card. I have several nvidia driver versions installed but 410.79 is the one being used. My kernel version is 4.15, which I believe is the latest. (I have done previously done the same on 18.04 with the same results.)
I recently began using tensorflow-gpu with cuda 9.0 (latest version that tensorflow is compatible with) and since then the computer has been freezing every couple of hours seemingly out of the blue. The cursor disappears and it doesn't respond to any commands, and I have to force shutdown. The fan also begins spinning loudly and the laptop heats up, as if it is running a very taxing process. Once it froze while displaying htop though, and I didn't see any unusual processes listed.
There is a suggestion here to install modprobe, but I already have the latest version. I also tried the solution here, but this gave errors when tensorflow tried to use the gpu.
Most recently I have removed and reinstalled all of:
cuda-9.0, from tensorflow instructions, the deb(local) option, followed by the 4 patches
cudnn, from nvidia webiste, runtime (deb) option
tensorflow-gpu
in that order, and it hasn't helped.
ubuntu drivers nvidia gpu
edited Jan 17 at 15:26
Rui F Ribeiro
39.6k1479132
asked Jan 17 at 15:24
ludogludog
61
closed as too broad by Rui F Ribeiro, Mr Shunz, Stephen Harris, Thomas, Isaac Jan 19 at 21:06
Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.
add a comment |
I am running Ubuntu 16.04 on a Dell XPS 15 with an Nvidia GTX1050i graphics card. I have several nvidia driver versions installed but 410.79 is the one being used. My kernel version is 4.15, which I believe is the latest. (I have done previously done the same on 18.04 with the same results.)
I recently began using tensorflow-gpu with cuda 9.0 (latest version that tensorflow is compatible with) and since then the computer has been freezing every couple of hours seemingly out of the blue. The cursor disappears and it doesn't respond to any commands, and I have to force shutdown. The fan also begins spinning loudly and the laptop heats up, as if it is running a very taxing process. Once it froze while displaying htop though, and I didn't see any unusual processes listed.
There is a suggestion here to install modprobe, but I already have the latest version. I also tried the solution here, but this gave errors when tensorflow tried to use the gpu.
Most recently I have removed and reinstalled all of:
cuda-9.0, from tensorflow instructions, the deb(local) option, followed by the 4 patches
cudnn, from nvidia webiste, runtime (deb) option
tensorflow-gpu
in that order, and it hasn't helped.
ubuntu drivers nvidia gpu
edited Jan 17 at 15:26
Rui F Ribeiro
39.6k1479132
asked Jan 17 at 15:24
ludogludog
61
closed as too broad by Rui F Ribeiro, Mr Shunz, Stephen Harris, Thomas, Isaac Jan 19 at 21:06
Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.
add a comment |
I am running Ubuntu 16.04 on a Dell XPS 15 with an Nvidia GTX1050i graphics card. I have several nvidia driver versions installed but 410.79 is the one being used. My kernel version is 4.15, which I believe is the latest. (I have done previously done the same on 18.04 with the same results.)
I recently began using tensorflow-gpu with cuda 9.0 (latest version that tensorflow is compatible with) and since then the computer has been freezing every couple of hours seemingly out of the blue. The cursor disappears and it doesn't respond to any commands, and I have to force shutdown. The fan also begins spinning loudly and the laptop heats up, as if it is running a very taxing process. Once it froze while displaying htop though, and I didn't see any unusual processes listed.
There is a suggestion here to install modprobe, but I already have the latest version. I also tried the solution here, but this gave errors when tensorflow tried to use the gpu.
Most recently I have removed and reinstalled all of:
cuda-9.0, from tensorflow instructions, the deb(local) option, followed by the 4 patches
cudnn, from nvidia webiste, runtime (deb) option
tensorflow-gpu
in that order, and it hasn't helped.
ubuntu drivers nvidia gpu
edited Jan 17 at 15:26
Rui F Ribeiro
39.6k1479132
asked Jan 17 at 15:24
ludogludog
61
I am running Ubuntu 16.04 on a Dell XPS 15 with an Nvidia GTX1050i graphics card. I have several nvidia driver versions installed but 410.79 is the one being used. My kernel version is 4.15, which I believe is the latest. (I have done previously done the same on 18.04 with the same results.)
I recently began using tensorflow-gpu with cuda 9.0 (latest version that tensorflow is compatible with) and since then the computer has been freezing every couple of hours seemingly out of the blue. The cursor disappears and it doesn't respond to any commands, and I have to force shutdown. The fan also begins spinning loudly and the laptop heats up, as if it is running a very taxing process. Once it froze while displaying htop though, and I didn't see any unusual processes listed.
There is a suggestion here to install modprobe, but I already have the latest version. I also tried the solution here, but this gave errors when tensorflow tried to use the gpu.
Most recently I have removed and reinstalled all of:
cuda-9.0, from tensorflow instructions, the deb(local) option, followed by the 4 patches
cudnn, from nvidia webiste, runtime (deb) option
tensorflow-gpu
in that order, and it hasn't helped.
ubuntu drivers nvidia gpu
ubuntu drivers nvidia gpu
edited Jan 17 at 15:26
Rui F Ribeiro
39.6k1479132
asked Jan 17 at 15:24
ludogludog
61
edited Jan 17 at 15:26
Rui F Ribeiro
39.6k1479132
asked Jan 17 at 15:24
ludogludog
61
edited Jan 17 at 15:26
Rui F Ribeiro
39.6k1479132
edited Jan 17 at 15:26
Rui F Ribeiro
39.6k1479132
edited Jan 17 at 15:26
Rui F Ribeiro
39.6k1479132
39.6k1479132
asked Jan 17 at 15:24
ludogludog
61
asked Jan 17 at 15:24
ludogludog
61
asked Jan 17 at 15:24
ludogludog
61
61
closed as too broad by Rui F Ribeiro, Mr Shunz, Stephen Harris, Thomas, Isaac Jan 19 at 21:06
Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.
closed as too broad by Rui F Ribeiro, Mr Shunz, Stephen Harris, Thomas, Isaac Jan 19 at 21:06
Please edit the question to limit it to a specific problem with enough detail to identify an adequate answer. Avoid asking multiple distinct questions at once. See the How to Ask page for help clarifying this question. If this question can be reworded to fit the rules in the help center, please edit the question.
add a comment |
add a comment |
0
active
oldest
votes
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
