How to get rid of arrows from european voltage source in tikz?












3















I would like to get rid of the arrow from the voltage source and just use the label without arrow. Is it posible? Any help would be much appreciated. Thanks



documentclass{article}
usepackage[utf8]{inputenc}
usepackage{tikz}
usepackage{color}
usepackage[siunitx]{circuitikz}
usetikzlibrary{shapes.misc}
begin{document}
begin{figure}[t!]
centering
ctikzset{bipoles/length=1.cm}
begin{circuitikz}[scale = 0.6]
draw (-2,-2) node[ground] {} to[sV=$SG_1$] (-2,0);
end{circuitikz}
end{figure}
end{document}









share|improve this question





























    3















    I would like to get rid of the arrow from the voltage source and just use the label without arrow. Is it posible? Any help would be much appreciated. Thanks



    documentclass{article}
    usepackage[utf8]{inputenc}
    usepackage{tikz}
    usepackage{color}
    usepackage[siunitx]{circuitikz}
    usetikzlibrary{shapes.misc}
    begin{document}
    begin{figure}[t!]
    centering
    ctikzset{bipoles/length=1.cm}
    begin{circuitikz}[scale = 0.6]
    draw (-2,-2) node[ground] {} to[sV=$SG_1$] (-2,0);
    end{circuitikz}
    end{figure}
    end{document}









    share|improve this question



























      3












      3








      3








      I would like to get rid of the arrow from the voltage source and just use the label without arrow. Is it posible? Any help would be much appreciated. Thanks



      documentclass{article}
      usepackage[utf8]{inputenc}
      usepackage{tikz}
      usepackage{color}
      usepackage[siunitx]{circuitikz}
      usetikzlibrary{shapes.misc}
      begin{document}
      begin{figure}[t!]
      centering
      ctikzset{bipoles/length=1.cm}
      begin{circuitikz}[scale = 0.6]
      draw (-2,-2) node[ground] {} to[sV=$SG_1$] (-2,0);
      end{circuitikz}
      end{figure}
      end{document}









      share|improve this question
















      I would like to get rid of the arrow from the voltage source and just use the label without arrow. Is it posible? Any help would be much appreciated. Thanks



      documentclass{article}
      usepackage[utf8]{inputenc}
      usepackage{tikz}
      usepackage{color}
      usepackage[siunitx]{circuitikz}
      usetikzlibrary{shapes.misc}
      begin{document}
      begin{figure}[t!]
      centering
      ctikzset{bipoles/length=1.cm}
      begin{circuitikz}[scale = 0.6]
      draw (-2,-2) node[ground] {} to[sV=$SG_1$] (-2,0);
      end{circuitikz}
      end{figure}
      end{document}






      tikz-styles circuitikz






      share|improve this question















      share|improve this question













      share|improve this question




      share|improve this question








      edited 4 hours ago







      MESSI

















      asked 4 hours ago









      MESSIMESSI

      384




      384






















          2 Answers
          2






          active

          oldest

          votes


















          3














          It seems to me that all you need is sinusoidal voltage source,label=..., which can be made a style.



          documentclass{article}
          usepackage[siunitx]{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[sinusoidal voltage source,label=$SG_1$] (-2,0);
          end{circuitikz}
          quadtikzset{myV/.style={sinusoidal voltage source,label=#1}}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[myV=$SG_1$] (-2,0);
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here






          share|improve this answer
























          • That's perfect. Thanks very much...

            – MESSI
            1 hour ago



















          4














          You can just add a node at some place, that doesn't print the arrow, but you get the label placed:



          documentclass{article}
          usepackage[utf8]{inputenc}
          usepackage{tikz}
          usepackage{color}
          usepackage{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {} to[sV] (-2,0);
          node[anchor=east] at (-2.5,-1) {$SG_1$};
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here






          share|improve this answer
























          • Thanks, Skillmon, I have so many voltage sources in the diagram, and to add nodes at each source is really time-consuming. Are there any other alternative options similar to labelling?

            – MESSI
            4 hours ago











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "85"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f474951%2fhow-to-get-rid-of-arrows-from-european-voltage-source-in-tikz%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          2 Answers
          2






          active

          oldest

          votes








          2 Answers
          2






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          3














          It seems to me that all you need is sinusoidal voltage source,label=..., which can be made a style.



          documentclass{article}
          usepackage[siunitx]{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[sinusoidal voltage source,label=$SG_1$] (-2,0);
          end{circuitikz}
          quadtikzset{myV/.style={sinusoidal voltage source,label=#1}}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[myV=$SG_1$] (-2,0);
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here






          share|improve this answer
























          • That's perfect. Thanks very much...

            – MESSI
            1 hour ago
















          3














          It seems to me that all you need is sinusoidal voltage source,label=..., which can be made a style.



          documentclass{article}
          usepackage[siunitx]{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[sinusoidal voltage source,label=$SG_1$] (-2,0);
          end{circuitikz}
          quadtikzset{myV/.style={sinusoidal voltage source,label=#1}}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[myV=$SG_1$] (-2,0);
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here






          share|improve this answer
























          • That's perfect. Thanks very much...

            – MESSI
            1 hour ago














          3












          3








          3







          It seems to me that all you need is sinusoidal voltage source,label=..., which can be made a style.



          documentclass{article}
          usepackage[siunitx]{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[sinusoidal voltage source,label=$SG_1$] (-2,0);
          end{circuitikz}
          quadtikzset{myV/.style={sinusoidal voltage source,label=#1}}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[myV=$SG_1$] (-2,0);
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here






          share|improve this answer













          It seems to me that all you need is sinusoidal voltage source,label=..., which can be made a style.



          documentclass{article}
          usepackage[siunitx]{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[sinusoidal voltage source,label=$SG_1$] (-2,0);
          end{circuitikz}
          quadtikzset{myV/.style={sinusoidal voltage source,label=#1}}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {}
          to[myV=$SG_1$] (-2,0);
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered 1 hour ago









          marmotmarmot

          100k4115222




          100k4115222













          • That's perfect. Thanks very much...

            – MESSI
            1 hour ago



















          • That's perfect. Thanks very much...

            – MESSI
            1 hour ago

















          That's perfect. Thanks very much...

          – MESSI
          1 hour ago





          That's perfect. Thanks very much...

          – MESSI
          1 hour ago











          4














          You can just add a node at some place, that doesn't print the arrow, but you get the label placed:



          documentclass{article}
          usepackage[utf8]{inputenc}
          usepackage{tikz}
          usepackage{color}
          usepackage{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {} to[sV] (-2,0);
          node[anchor=east] at (-2.5,-1) {$SG_1$};
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here






          share|improve this answer
























          • Thanks, Skillmon, I have so many voltage sources in the diagram, and to add nodes at each source is really time-consuming. Are there any other alternative options similar to labelling?

            – MESSI
            4 hours ago
















          4














          You can just add a node at some place, that doesn't print the arrow, but you get the label placed:



          documentclass{article}
          usepackage[utf8]{inputenc}
          usepackage{tikz}
          usepackage{color}
          usepackage{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {} to[sV] (-2,0);
          node[anchor=east] at (-2.5,-1) {$SG_1$};
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here






          share|improve this answer
























          • Thanks, Skillmon, I have so many voltage sources in the diagram, and to add nodes at each source is really time-consuming. Are there any other alternative options similar to labelling?

            – MESSI
            4 hours ago














          4












          4








          4







          You can just add a node at some place, that doesn't print the arrow, but you get the label placed:



          documentclass{article}
          usepackage[utf8]{inputenc}
          usepackage{tikz}
          usepackage{color}
          usepackage{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {} to[sV] (-2,0);
          node[anchor=east] at (-2.5,-1) {$SG_1$};
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here






          share|improve this answer













          You can just add a node at some place, that doesn't print the arrow, but you get the label placed:



          documentclass{article}
          usepackage[utf8]{inputenc}
          usepackage{tikz}
          usepackage{color}
          usepackage{circuitikz}
          usetikzlibrary{shapes.misc}
          begin{document}
          begin{figure}[t!]
          centering
          ctikzset{bipoles/length=1.cm}
          begin{circuitikz}[scale = 0.6]
          draw (-2,-2) node[ground] {} to[sV] (-2,0);
          node[anchor=east] at (-2.5,-1) {$SG_1$};
          end{circuitikz}
          end{figure}
          end{document}


          enter image description here







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered 4 hours ago









          SkillmonSkillmon

          22.2k11942




          22.2k11942













          • Thanks, Skillmon, I have so many voltage sources in the diagram, and to add nodes at each source is really time-consuming. Are there any other alternative options similar to labelling?

            – MESSI
            4 hours ago



















          • Thanks, Skillmon, I have so many voltage sources in the diagram, and to add nodes at each source is really time-consuming. Are there any other alternative options similar to labelling?

            – MESSI
            4 hours ago

















          Thanks, Skillmon, I have so many voltage sources in the diagram, and to add nodes at each source is really time-consuming. Are there any other alternative options similar to labelling?

          – MESSI
          4 hours ago





          Thanks, Skillmon, I have so many voltage sources in the diagram, and to add nodes at each source is really time-consuming. Are there any other alternative options similar to labelling?

          – MESSI
          4 hours ago


















          draft saved

          draft discarded




















































          Thanks for contributing an answer to TeX - LaTeX Stack Exchange!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f474951%2fhow-to-get-rid-of-arrows-from-european-voltage-source-in-tikz%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          How to make a Squid Proxy server?

          Is this a new Fibonacci Identity?

          Touch on Surface Book