Linux mint has just crashed - Jessie 8 (LMDE)












0















I did a normal update to the system last night and after reboot my computer just stopped working and keeps falling back to 'fallback mode'. I tried to reinstall Cinnamon without success. I tried to reinstall AIT drivers - no success. Does anyone have ideas?



[    2.083224] i8042: Warning: Keylock active
[ 2.085645] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.085648] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.085731] mousedev: PS/2 mouse device common for all mice
[ 2.085813] rtc_cmos 00:02: RTC can wake from S4
[ 2.085918] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.085949] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.085956] Intel P-state driver initializing.
[ 2.085973] Intel pstate controlling: cpu 0
[ 2.085985] Intel pstate controlling: cpu 1
[ 2.085998] Intel pstate controlling: cpu 2
[ 2.086013] Intel pstate controlling: cpu 3
[ 2.086110] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.087280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.088998] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 2.089001] AMD IOMMUv2 functionality not available on this system
[ 2.089198] TCP: cubic registered
[ 2.089357] NET: Registered protocol family 10
[ 2.089826] mip6: Mobile IPv6
[ 2.089836] NET: Registered protocol family 17
[ 2.089851] mpls_gso: MPLS GSO support
[ 2.090202] registered taskstats version 1
[ 2.090773] rtc_cmos 00:02: setting system clock to 2015-06-25 12:21:04 UTC (1435234864)
[ 2.090837] PM: Hibernation image not present or could not be loaded.
[ 2.091351] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.091352] Write protecting the kernel read-only data: 8192k
[ 2.092668] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.093360] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.112196] systemd-udevd[76]: starting version 215
[ 2.112367] random: systemd-udevd urandom read with 6 bits of entropy available
[ 2.116736] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.117422] ACPI: Lid Switch [LID0]
[ 2.117473] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.117477] ACPI: Power Button [PBTN]
[ 2.117524] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 2.117526] ACPI: Sleep Button [SBTN]
[ 2.117574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.117576] ACPI: Power Button [PWRF]
[ 2.121219] wmi: Mapper loaded
[ 2.121824] pps_core: LinuxPPS API ver. 1 registered
[ 2.121825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.121968] PTP clock support registered
[ 2.122829] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.122830] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 2.123380] ACPI: bus type USB registered
[ 2.123402] usbcore: registered new interface driver usbfs
[ 2.123411] usbcore: registered new interface driver hub
[ 2.123437] [drm] Initialized drm 1.1.0 20060810
[ 2.123450] usbcore: registered new device driver usb
[ 2.123963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.124135] ehci-pci: EHCI PCI platform driver
[ 2.126105] SCSI subsystem initialized
[ 2.126274] sdhci: Secure Digital Host Controller Interface driver
[ 2.126275] sdhci: Copyright(c) Pierre Ossman
[ 2.126568] sdhci-pci 0000:0e:00.0: SDHCI controller found [1217:8520] (rev 1)
[ 2.127348] libata version 3.00 loaded.
[ 2.162168] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.162196] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 2.162243] mmc0: Unknown controller version (3). You may experience problems.
[ 2.162301] mmc0: no vqmmc regulator found
[ 2.162302] mmc0: no vmmc regulator found
[ 2.162423] mmc0: SDHCI controller on PCI [0000:0e:00.0] using ADMA
[ 2.378183] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.378185] ACPI: Thermal Zone [THM] (25 C)
[ 2.425522] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.425525] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:1f:af:37:22:9d
[ 2.425526] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.425569] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 2.425718] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.425724] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.425815] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.425834] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 2.425941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.425942] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.425943] usb usb1: Product: xHCI Host Controller
[ 2.425944] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.425945] usb usb1: SerialNumber: 0000:00:14.0
[ 2.426035] hub 1-0:1.0: USB hub found
[ 2.426069] hub 1-0:1.0: 15 ports detected
[ 2.427771] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.427774] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.427845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.427846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.427847] usb usb2: Product: xHCI Host Controller
[ 2.427848] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.427848] usb usb2: SerialNumber: 0000:00:14.0
[ 2.427929] hub 2-0:1.0: USB hub found
[ 2.427946] hub 2-0:1.0: 6 ports detected
[ 2.428756] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.428761] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.428777] ehci-pci 0000:00:1a.0: debug port 2
[ 2.432683] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.432695] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000
[ 2.442069] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.442092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.442094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.442095] usb usb3: Product: EHCI Host Controller
[ 2.442096] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.442096] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.442182] hub 3-0:1.0: USB hub found
[ 2.442185] hub 3-0:1.0: 3 ports detected
[ 2.442358] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.442362] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.442372] ehci-pci 0000:00:1d.0: debug port 2
[ 2.446266] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.446276] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7d3b000
[ 2.458071] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.458097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.458099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.458101] usb usb4: Product: EHCI Host Controller
[ 2.458102] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.458103] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.458186] hub 4-0:1.0: USB hub found
[ 2.458189] hub 4-0:1.0: 3 ports detected
[ 2.458318] ahci 0000:00:1f.2: version 3.0
[ 2.458428] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.458447] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.458467] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x7 impl RAID mode
[ 2.458469] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
[ 2.474572] scsi0 : ahci
[ 2.474684] scsi1 : ahci
[ 2.474774] scsi2 : ahci
[ 2.474861] scsi3 : ahci
[ 2.474948] scsi4 : ahci
[ 2.474991] ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 45
[ 2.474994] ata2: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a180 irq 45
[ 2.474996] ata3: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a200 irq 45
[ 2.474997] ata4: DUMMY
[ 2.474998] ata5: DUMMY
[ 2.475319] [drm] Memory usable by graphics device = 2048M
[ 2.475321] [drm] Replacing VGA console driver
[ 2.476302] Console: switching to colour dummy device 80x25
[ 2.530203] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 2.530214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.530215] [drm] Driver supports precise vblank timestamp query.
[ 2.530240] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 2.557247] [drm] VBT doesn't support DRRS
[ 2.738203] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 2.794187] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.794391] ata1.00: ATA-8: OCZ-ARC100, 1.01, max UDMA/133
[ 2.794394] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.795411] ata1.00: configured for UDMA/133
[ 2.795515] scsi 0:0:0:0: Direct-Access ATA OCZ-ARC100 1.01 PQ: 0 ANSI: 5
[ 2.831879] fbcon: inteldrmfb (fb0) is primary device
[ 2.868437] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b
[ 2.868438] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.868439] usb 1-3: Product: USB Receiver
[ 2.868439] usb 1-3: Manufacturer: Logitech
[ 2.869859] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.873292] usbcore: registered new interface driver usbhid
[ 2.873292] usbhid: USB HID core driver
[ 2.874475] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 2.934425] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input6
[ 2.934480] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:14.0-3:1
[ 2.936353] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input7
[ 2.936449] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-3:2
[ 3.034269] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 3.058258] tsc: Refined TSC clocksource calibration: 2893.304 MHz
[ 3.114281] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.116034] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8C2, 1.02, max UDMA/133
[ 3.117490] ata2.00: configured for UDMA/133
[ 3.118892] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8C2 1.02 PQ: 0 ANSI: 5
[ 3.165901] usb 1-9: New USB device found, idVendor=8087, idProduct=07da
[ 3.165903] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.278371] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.410786] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 3.410787] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.410990] hub 3-1:1.0: USB hub found
[ 3.411086] hub 3-1:1.0: 6 ports detected
[ 3.446356] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.448285] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 3.448300] sd 0:0:0:0: [sda] Write Protect is off
[ 3.448301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.448306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.448717] sda: sda1 sda2 sda3
[ 3.448876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.456492] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.456493] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.456577] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.456930] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.456965] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.522395] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 3.654829] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 3.654830] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.655053] hub 4-1:1.0: USB hub found
[ 3.655170] hub 4-1:1.0: 8 ports detected
[ 3.726591] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 3.892190] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=64d0
[ 3.892191] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.892192] usb 3-1.5: Product: Laptop_Integrated_Webcam_HD
[ 3.892193] usb 3-1.5: Manufacturer: CN0767N972487381B6A5A00
[ 3.990500] Console: switching to colour frame buffer device 210x65
[ 3.993232] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.993233] i915 0000:00:02.0: registered panic notifier
[ 4.026972] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 4.027464] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 4.027518] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input8
[ 4.028375] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.058541] Switched to clocksource tsc
[ 4.090648] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 4.090692] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.097930] device-mapper: uevent: version 1.0.3
[ 4.097991] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 4.144101] PM: Starting manual resume from disk
[ 4.144104] PM: Hibernation image partition 8:1 present
[ 4.144105] PM: Looking for hibernation image.
[ 4.144163] PM: Image not found (code -22)
[ 4.144164] PM: Hibernation image not present or could not be loaded.
[ 4.168544] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.331451] systemd-udevd[365]: starting version 215
[ 4.388071] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.388994] ACPI: AC Adapter [AC] (on-line)
[ 4.392055] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 4.395502] parport_pc 00:07: [io 0x0378-0x037b]
[ 4.395553] parport_pc 00:07: [irq 5]
[ 4.415018] cfg80211: Calling CRDA to update world regulatory domain
[ 4.415625] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 4.415749] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 4.415850] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 4.415856] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.418905] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 4.418907] Copyright(c) 2003- 2014 Intel Corporation
[ 4.419065] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 4.424697] Bluetooth: Core ver 2.19
[ 4.424705] NET: Registered protocol family 31
[ 4.424706] Bluetooth: HCI device and connection manager initialized
[ 4.424711] Bluetooth: HCI socket layer initialized
[ 4.424713] Bluetooth: L2CAP socket layer initialized
[ 4.424719] Bluetooth: SCO socket layer initialized
[ 4.429655] sound hdaudioC1D0: autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 4.429657] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 4.429658] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.429659] sound hdaudioC1D0: mono: mono_out=0x0
[ 4.429660] sound hdaudioC1D0: inputs:
[ 4.429661] sound hdaudioC1D0: Dock Mic=0x19
[ 4.429662] sound hdaudioC1D0: Headset Mic=0x1a
[ 4.429663] sound hdaudioC1D0: Internal Mic=0x12
[ 4.436232] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 4.436283] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 4.436343] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 4.436422] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input12
[ 4.436651] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.436679] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.436709] iwlwifi 0000:03:00.0: irq 50 for MSI/MSI-X
[ 4.436818] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.437110] AVX2 version of gcm_enc/dec engaged.
[ 4.437216] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.439322] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.441062] usbcore: registered new interface driver btusb
[ 4.442872] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[ 4.443065] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 4.443712] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.466477] alg: No test for crc32 (crc32-pclmul)
[ 4.469964] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.469966] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.469967] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 4.469968] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 4.470010] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 4.473242] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.473244] Disabling lock debugging due to kernel taint
[ 4.482182] media: Linux media interface: v0.10
[ 4.483772] intel_rapl: Found RAPL domain package
[ 4.483778] intel_rapl: Found RAPL domain core
[ 4.483781] intel_rapl: Found RAPL domain uncore
[ 4.483782] intel_rapl: Found RAPL domain dram
[ 4.484860] Linux video capture interface: v2.00
[ 4.489022] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.489332] input: Dell WMI hotkeys as /devices/virtual/input/input19
[ 4.491319] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d0)
[ 4.498585] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7677 MBytes.
[ 4.498744] <6>[fglrx] vendor: 1002 device: 6606 count: 1
[ 4.498966] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 4.498971] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.503440] <6>[fglrx] Kernel PAT support is enabled
[ 4.503454] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 1 minors
[ 4.506856] iTCO_vendor_support: vendor-support=0
[ 4.506958] ppdev: user-space parallel port driver
[ 4.507374] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.507402] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.507454] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.529161] cfg80211: World regulatory domain updated:
[ 4.529163] cfg80211: DFS Master region: unset
[ 4.529164] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.529166] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529167] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529169] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529171] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.529173] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.529174] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.529176] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529178] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.532171] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input20
[ 4.532250] usbcore: registered new interface driver uvcvideo
[ 4.532251] USB Video Class driver (1.1.1)
[ 4.546870] parport_pc 00:07: activated
[ 4.546873] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.548492] parport_pc 00:07: disabled
[ 4.554218] ACPI: Battery Slot [BAT0] (battery present)
[ 4.658690] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.786770] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.671712] random: nonblocking pool is initialized
[ 5.674748] Adding 8388604k swap on /dev/sda1. Priority:-1 extents:1 across:8388604k SSFS
[ 5.683514] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.722857] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 5.739347] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input21
[ 5.751385] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
[ 5.841161] lp: driver loaded but no devices found
[ 5.897032] fuse init (API version 7.23)
[ 5.981893] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 6.707882] systemd-logind[2116]: New seat seat0.
[ 6.711031] systemd-logind[2116]: Failed to start user service: Unknown unit: user@1000.service
[ 6.712919] systemd-logind[2116]: New session c1 of user maciej.
[ 6.717355] input: BRLTTY 5.2dev Linux Screen Driver Keyboard as /devices/virtual/input/input22
[ 7.250634] systemd-logind[2116]: Removed session c1.
[ 8.658795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.658797] Bluetooth: BNEP filters: protocol multicast
[ 8.658804] Bluetooth: BNEP socket layer initialized
[ 8.667852] systemd-hostnamed[2849]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 8.848794] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.951617] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.951699] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.953129] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 8.959982] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 9.233274] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 9.240020] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 9.327933] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.750928] wlan0: authenticate with d0:2d:b3:54:df:dc
[ 15.755226] wlan0: send auth to d0:2d:b3:54:df:dc (try 1/3)
[ 15.844465] wlan0: authenticated
[ 15.845094] wlan0: associate with d0:2d:b3:54:df:dc (try 1/3)
[ 15.855699] wlan0: RX AssocResp from d0:2d:b3:54:df:dc (capab=0x431 status=0 aid=3)
[ 15.858001] wlan0: associated
[ 15.858023] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.858051] cfg80211: Calling CRDA for country: GB
[ 15.859706] cfg80211: Regulatory domain changed to country: GB
[ 15.859709] cfg80211: DFS Master region: ETSI
[ 15.859710] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.859711] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.859712] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.859713] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.859714] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 15.859715] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 21.680373] systemd-logind[2116]: New session 1 of user maciej.


I have installed iceWM as a 'failsafe dsktop' and I have uninstalled Cinnamon completely and re-installed it and the same thing happens. I got message the same message: Cinnamon just crashed.










share|improve this question

























  • Can you run dmesg or less /var/log/messages in a plain console?

    – Basile Starynkevitch
    Jun 25 '15 at 11:28











  • @BasileStarynkevitch Yes and i can see this error : Failed to start user service : Unknow unit: user@1000.service, Unknown controller version (3). You may experience problems. <-these are red messages

    – Maciej Cygan
    Jun 25 '15 at 11:42











  • Edit your question to show these messages (and the few lines before)

    – Basile Starynkevitch
    Jun 25 '15 at 11:43











  • @BasileStarynkevitch Will try ;) but its not going to be easy since its a fallback mode i can barely do anything ;o!

    – Maciej Cygan
    Jun 25 '15 at 12:13











  • @BasileStarynkevitch Ok so log output attached. The problem only appeared after i did update last night. Before system was working fine.

    – Maciej Cygan
    Jun 25 '15 at 13:40


















0















I did a normal update to the system last night and after reboot my computer just stopped working and keeps falling back to 'fallback mode'. I tried to reinstall Cinnamon without success. I tried to reinstall AIT drivers - no success. Does anyone have ideas?



[    2.083224] i8042: Warning: Keylock active
[ 2.085645] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.085648] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.085731] mousedev: PS/2 mouse device common for all mice
[ 2.085813] rtc_cmos 00:02: RTC can wake from S4
[ 2.085918] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.085949] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.085956] Intel P-state driver initializing.
[ 2.085973] Intel pstate controlling: cpu 0
[ 2.085985] Intel pstate controlling: cpu 1
[ 2.085998] Intel pstate controlling: cpu 2
[ 2.086013] Intel pstate controlling: cpu 3
[ 2.086110] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.087280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.088998] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 2.089001] AMD IOMMUv2 functionality not available on this system
[ 2.089198] TCP: cubic registered
[ 2.089357] NET: Registered protocol family 10
[ 2.089826] mip6: Mobile IPv6
[ 2.089836] NET: Registered protocol family 17
[ 2.089851] mpls_gso: MPLS GSO support
[ 2.090202] registered taskstats version 1
[ 2.090773] rtc_cmos 00:02: setting system clock to 2015-06-25 12:21:04 UTC (1435234864)
[ 2.090837] PM: Hibernation image not present or could not be loaded.
[ 2.091351] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.091352] Write protecting the kernel read-only data: 8192k
[ 2.092668] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.093360] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.112196] systemd-udevd[76]: starting version 215
[ 2.112367] random: systemd-udevd urandom read with 6 bits of entropy available
[ 2.116736] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.117422] ACPI: Lid Switch [LID0]
[ 2.117473] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.117477] ACPI: Power Button [PBTN]
[ 2.117524] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 2.117526] ACPI: Sleep Button [SBTN]
[ 2.117574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.117576] ACPI: Power Button [PWRF]
[ 2.121219] wmi: Mapper loaded
[ 2.121824] pps_core: LinuxPPS API ver. 1 registered
[ 2.121825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.121968] PTP clock support registered
[ 2.122829] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.122830] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 2.123380] ACPI: bus type USB registered
[ 2.123402] usbcore: registered new interface driver usbfs
[ 2.123411] usbcore: registered new interface driver hub
[ 2.123437] [drm] Initialized drm 1.1.0 20060810
[ 2.123450] usbcore: registered new device driver usb
[ 2.123963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.124135] ehci-pci: EHCI PCI platform driver
[ 2.126105] SCSI subsystem initialized
[ 2.126274] sdhci: Secure Digital Host Controller Interface driver
[ 2.126275] sdhci: Copyright(c) Pierre Ossman
[ 2.126568] sdhci-pci 0000:0e:00.0: SDHCI controller found [1217:8520] (rev 1)
[ 2.127348] libata version 3.00 loaded.
[ 2.162168] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.162196] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 2.162243] mmc0: Unknown controller version (3). You may experience problems.
[ 2.162301] mmc0: no vqmmc regulator found
[ 2.162302] mmc0: no vmmc regulator found
[ 2.162423] mmc0: SDHCI controller on PCI [0000:0e:00.0] using ADMA
[ 2.378183] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.378185] ACPI: Thermal Zone [THM] (25 C)
[ 2.425522] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.425525] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:1f:af:37:22:9d
[ 2.425526] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.425569] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 2.425718] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.425724] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.425815] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.425834] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 2.425941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.425942] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.425943] usb usb1: Product: xHCI Host Controller
[ 2.425944] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.425945] usb usb1: SerialNumber: 0000:00:14.0
[ 2.426035] hub 1-0:1.0: USB hub found
[ 2.426069] hub 1-0:1.0: 15 ports detected
[ 2.427771] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.427774] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.427845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.427846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.427847] usb usb2: Product: xHCI Host Controller
[ 2.427848] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.427848] usb usb2: SerialNumber: 0000:00:14.0
[ 2.427929] hub 2-0:1.0: USB hub found
[ 2.427946] hub 2-0:1.0: 6 ports detected
[ 2.428756] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.428761] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.428777] ehci-pci 0000:00:1a.0: debug port 2
[ 2.432683] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.432695] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000
[ 2.442069] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.442092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.442094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.442095] usb usb3: Product: EHCI Host Controller
[ 2.442096] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.442096] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.442182] hub 3-0:1.0: USB hub found
[ 2.442185] hub 3-0:1.0: 3 ports detected
[ 2.442358] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.442362] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.442372] ehci-pci 0000:00:1d.0: debug port 2
[ 2.446266] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.446276] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7d3b000
[ 2.458071] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.458097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.458099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.458101] usb usb4: Product: EHCI Host Controller
[ 2.458102] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.458103] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.458186] hub 4-0:1.0: USB hub found
[ 2.458189] hub 4-0:1.0: 3 ports detected
[ 2.458318] ahci 0000:00:1f.2: version 3.0
[ 2.458428] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.458447] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.458467] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x7 impl RAID mode
[ 2.458469] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
[ 2.474572] scsi0 : ahci
[ 2.474684] scsi1 : ahci
[ 2.474774] scsi2 : ahci
[ 2.474861] scsi3 : ahci
[ 2.474948] scsi4 : ahci
[ 2.474991] ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 45
[ 2.474994] ata2: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a180 irq 45
[ 2.474996] ata3: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a200 irq 45
[ 2.474997] ata4: DUMMY
[ 2.474998] ata5: DUMMY
[ 2.475319] [drm] Memory usable by graphics device = 2048M
[ 2.475321] [drm] Replacing VGA console driver
[ 2.476302] Console: switching to colour dummy device 80x25
[ 2.530203] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 2.530214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.530215] [drm] Driver supports precise vblank timestamp query.
[ 2.530240] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 2.557247] [drm] VBT doesn't support DRRS
[ 2.738203] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 2.794187] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.794391] ata1.00: ATA-8: OCZ-ARC100, 1.01, max UDMA/133
[ 2.794394] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.795411] ata1.00: configured for UDMA/133
[ 2.795515] scsi 0:0:0:0: Direct-Access ATA OCZ-ARC100 1.01 PQ: 0 ANSI: 5
[ 2.831879] fbcon: inteldrmfb (fb0) is primary device
[ 2.868437] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b
[ 2.868438] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.868439] usb 1-3: Product: USB Receiver
[ 2.868439] usb 1-3: Manufacturer: Logitech
[ 2.869859] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.873292] usbcore: registered new interface driver usbhid
[ 2.873292] usbhid: USB HID core driver
[ 2.874475] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 2.934425] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input6
[ 2.934480] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:14.0-3:1
[ 2.936353] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input7
[ 2.936449] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-3:2
[ 3.034269] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 3.058258] tsc: Refined TSC clocksource calibration: 2893.304 MHz
[ 3.114281] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.116034] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8C2, 1.02, max UDMA/133
[ 3.117490] ata2.00: configured for UDMA/133
[ 3.118892] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8C2 1.02 PQ: 0 ANSI: 5
[ 3.165901] usb 1-9: New USB device found, idVendor=8087, idProduct=07da
[ 3.165903] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.278371] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.410786] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 3.410787] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.410990] hub 3-1:1.0: USB hub found
[ 3.411086] hub 3-1:1.0: 6 ports detected
[ 3.446356] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.448285] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 3.448300] sd 0:0:0:0: [sda] Write Protect is off
[ 3.448301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.448306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.448717] sda: sda1 sda2 sda3
[ 3.448876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.456492] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.456493] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.456577] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.456930] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.456965] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.522395] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 3.654829] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 3.654830] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.655053] hub 4-1:1.0: USB hub found
[ 3.655170] hub 4-1:1.0: 8 ports detected
[ 3.726591] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 3.892190] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=64d0
[ 3.892191] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.892192] usb 3-1.5: Product: Laptop_Integrated_Webcam_HD
[ 3.892193] usb 3-1.5: Manufacturer: CN0767N972487381B6A5A00
[ 3.990500] Console: switching to colour frame buffer device 210x65
[ 3.993232] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.993233] i915 0000:00:02.0: registered panic notifier
[ 4.026972] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 4.027464] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 4.027518] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input8
[ 4.028375] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.058541] Switched to clocksource tsc
[ 4.090648] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 4.090692] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.097930] device-mapper: uevent: version 1.0.3
[ 4.097991] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 4.144101] PM: Starting manual resume from disk
[ 4.144104] PM: Hibernation image partition 8:1 present
[ 4.144105] PM: Looking for hibernation image.
[ 4.144163] PM: Image not found (code -22)
[ 4.144164] PM: Hibernation image not present or could not be loaded.
[ 4.168544] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.331451] systemd-udevd[365]: starting version 215
[ 4.388071] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.388994] ACPI: AC Adapter [AC] (on-line)
[ 4.392055] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 4.395502] parport_pc 00:07: [io 0x0378-0x037b]
[ 4.395553] parport_pc 00:07: [irq 5]
[ 4.415018] cfg80211: Calling CRDA to update world regulatory domain
[ 4.415625] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 4.415749] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 4.415850] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 4.415856] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.418905] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 4.418907] Copyright(c) 2003- 2014 Intel Corporation
[ 4.419065] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 4.424697] Bluetooth: Core ver 2.19
[ 4.424705] NET: Registered protocol family 31
[ 4.424706] Bluetooth: HCI device and connection manager initialized
[ 4.424711] Bluetooth: HCI socket layer initialized
[ 4.424713] Bluetooth: L2CAP socket layer initialized
[ 4.424719] Bluetooth: SCO socket layer initialized
[ 4.429655] sound hdaudioC1D0: autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 4.429657] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 4.429658] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.429659] sound hdaudioC1D0: mono: mono_out=0x0
[ 4.429660] sound hdaudioC1D0: inputs:
[ 4.429661] sound hdaudioC1D0: Dock Mic=0x19
[ 4.429662] sound hdaudioC1D0: Headset Mic=0x1a
[ 4.429663] sound hdaudioC1D0: Internal Mic=0x12
[ 4.436232] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 4.436283] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 4.436343] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 4.436422] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input12
[ 4.436651] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.436679] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.436709] iwlwifi 0000:03:00.0: irq 50 for MSI/MSI-X
[ 4.436818] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.437110] AVX2 version of gcm_enc/dec engaged.
[ 4.437216] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.439322] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.441062] usbcore: registered new interface driver btusb
[ 4.442872] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[ 4.443065] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 4.443712] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.466477] alg: No test for crc32 (crc32-pclmul)
[ 4.469964] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.469966] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.469967] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 4.469968] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 4.470010] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 4.473242] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.473244] Disabling lock debugging due to kernel taint
[ 4.482182] media: Linux media interface: v0.10
[ 4.483772] intel_rapl: Found RAPL domain package
[ 4.483778] intel_rapl: Found RAPL domain core
[ 4.483781] intel_rapl: Found RAPL domain uncore
[ 4.483782] intel_rapl: Found RAPL domain dram
[ 4.484860] Linux video capture interface: v2.00
[ 4.489022] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.489332] input: Dell WMI hotkeys as /devices/virtual/input/input19
[ 4.491319] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d0)
[ 4.498585] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7677 MBytes.
[ 4.498744] <6>[fglrx] vendor: 1002 device: 6606 count: 1
[ 4.498966] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 4.498971] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.503440] <6>[fglrx] Kernel PAT support is enabled
[ 4.503454] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 1 minors
[ 4.506856] iTCO_vendor_support: vendor-support=0
[ 4.506958] ppdev: user-space parallel port driver
[ 4.507374] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.507402] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.507454] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.529161] cfg80211: World regulatory domain updated:
[ 4.529163] cfg80211: DFS Master region: unset
[ 4.529164] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.529166] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529167] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529169] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529171] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.529173] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.529174] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.529176] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529178] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.532171] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input20
[ 4.532250] usbcore: registered new interface driver uvcvideo
[ 4.532251] USB Video Class driver (1.1.1)
[ 4.546870] parport_pc 00:07: activated
[ 4.546873] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.548492] parport_pc 00:07: disabled
[ 4.554218] ACPI: Battery Slot [BAT0] (battery present)
[ 4.658690] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.786770] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.671712] random: nonblocking pool is initialized
[ 5.674748] Adding 8388604k swap on /dev/sda1. Priority:-1 extents:1 across:8388604k SSFS
[ 5.683514] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.722857] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 5.739347] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input21
[ 5.751385] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
[ 5.841161] lp: driver loaded but no devices found
[ 5.897032] fuse init (API version 7.23)
[ 5.981893] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 6.707882] systemd-logind[2116]: New seat seat0.
[ 6.711031] systemd-logind[2116]: Failed to start user service: Unknown unit: user@1000.service
[ 6.712919] systemd-logind[2116]: New session c1 of user maciej.
[ 6.717355] input: BRLTTY 5.2dev Linux Screen Driver Keyboard as /devices/virtual/input/input22
[ 7.250634] systemd-logind[2116]: Removed session c1.
[ 8.658795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.658797] Bluetooth: BNEP filters: protocol multicast
[ 8.658804] Bluetooth: BNEP socket layer initialized
[ 8.667852] systemd-hostnamed[2849]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 8.848794] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.951617] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.951699] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.953129] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 8.959982] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 9.233274] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 9.240020] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 9.327933] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.750928] wlan0: authenticate with d0:2d:b3:54:df:dc
[ 15.755226] wlan0: send auth to d0:2d:b3:54:df:dc (try 1/3)
[ 15.844465] wlan0: authenticated
[ 15.845094] wlan0: associate with d0:2d:b3:54:df:dc (try 1/3)
[ 15.855699] wlan0: RX AssocResp from d0:2d:b3:54:df:dc (capab=0x431 status=0 aid=3)
[ 15.858001] wlan0: associated
[ 15.858023] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.858051] cfg80211: Calling CRDA for country: GB
[ 15.859706] cfg80211: Regulatory domain changed to country: GB
[ 15.859709] cfg80211: DFS Master region: ETSI
[ 15.859710] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.859711] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.859712] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.859713] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.859714] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 15.859715] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 21.680373] systemd-logind[2116]: New session 1 of user maciej.


I have installed iceWM as a 'failsafe dsktop' and I have uninstalled Cinnamon completely and re-installed it and the same thing happens. I got message the same message: Cinnamon just crashed.










share|improve this question

























  • Can you run dmesg or less /var/log/messages in a plain console?

    – Basile Starynkevitch
    Jun 25 '15 at 11:28











  • @BasileStarynkevitch Yes and i can see this error : Failed to start user service : Unknow unit: user@1000.service, Unknown controller version (3). You may experience problems. <-these are red messages

    – Maciej Cygan
    Jun 25 '15 at 11:42











  • Edit your question to show these messages (and the few lines before)

    – Basile Starynkevitch
    Jun 25 '15 at 11:43











  • @BasileStarynkevitch Will try ;) but its not going to be easy since its a fallback mode i can barely do anything ;o!

    – Maciej Cygan
    Jun 25 '15 at 12:13











  • @BasileStarynkevitch Ok so log output attached. The problem only appeared after i did update last night. Before system was working fine.

    – Maciej Cygan
    Jun 25 '15 at 13:40
















0












0








0








I did a normal update to the system last night and after reboot my computer just stopped working and keeps falling back to 'fallback mode'. I tried to reinstall Cinnamon without success. I tried to reinstall AIT drivers - no success. Does anyone have ideas?



[    2.083224] i8042: Warning: Keylock active
[ 2.085645] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.085648] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.085731] mousedev: PS/2 mouse device common for all mice
[ 2.085813] rtc_cmos 00:02: RTC can wake from S4
[ 2.085918] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.085949] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.085956] Intel P-state driver initializing.
[ 2.085973] Intel pstate controlling: cpu 0
[ 2.085985] Intel pstate controlling: cpu 1
[ 2.085998] Intel pstate controlling: cpu 2
[ 2.086013] Intel pstate controlling: cpu 3
[ 2.086110] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.087280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.088998] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 2.089001] AMD IOMMUv2 functionality not available on this system
[ 2.089198] TCP: cubic registered
[ 2.089357] NET: Registered protocol family 10
[ 2.089826] mip6: Mobile IPv6
[ 2.089836] NET: Registered protocol family 17
[ 2.089851] mpls_gso: MPLS GSO support
[ 2.090202] registered taskstats version 1
[ 2.090773] rtc_cmos 00:02: setting system clock to 2015-06-25 12:21:04 UTC (1435234864)
[ 2.090837] PM: Hibernation image not present or could not be loaded.
[ 2.091351] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.091352] Write protecting the kernel read-only data: 8192k
[ 2.092668] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.093360] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.112196] systemd-udevd[76]: starting version 215
[ 2.112367] random: systemd-udevd urandom read with 6 bits of entropy available
[ 2.116736] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.117422] ACPI: Lid Switch [LID0]
[ 2.117473] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.117477] ACPI: Power Button [PBTN]
[ 2.117524] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 2.117526] ACPI: Sleep Button [SBTN]
[ 2.117574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.117576] ACPI: Power Button [PWRF]
[ 2.121219] wmi: Mapper loaded
[ 2.121824] pps_core: LinuxPPS API ver. 1 registered
[ 2.121825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.121968] PTP clock support registered
[ 2.122829] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.122830] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 2.123380] ACPI: bus type USB registered
[ 2.123402] usbcore: registered new interface driver usbfs
[ 2.123411] usbcore: registered new interface driver hub
[ 2.123437] [drm] Initialized drm 1.1.0 20060810
[ 2.123450] usbcore: registered new device driver usb
[ 2.123963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.124135] ehci-pci: EHCI PCI platform driver
[ 2.126105] SCSI subsystem initialized
[ 2.126274] sdhci: Secure Digital Host Controller Interface driver
[ 2.126275] sdhci: Copyright(c) Pierre Ossman
[ 2.126568] sdhci-pci 0000:0e:00.0: SDHCI controller found [1217:8520] (rev 1)
[ 2.127348] libata version 3.00 loaded.
[ 2.162168] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.162196] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 2.162243] mmc0: Unknown controller version (3). You may experience problems.
[ 2.162301] mmc0: no vqmmc regulator found
[ 2.162302] mmc0: no vmmc regulator found
[ 2.162423] mmc0: SDHCI controller on PCI [0000:0e:00.0] using ADMA
[ 2.378183] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.378185] ACPI: Thermal Zone [THM] (25 C)
[ 2.425522] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.425525] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:1f:af:37:22:9d
[ 2.425526] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.425569] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 2.425718] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.425724] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.425815] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.425834] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 2.425941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.425942] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.425943] usb usb1: Product: xHCI Host Controller
[ 2.425944] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.425945] usb usb1: SerialNumber: 0000:00:14.0
[ 2.426035] hub 1-0:1.0: USB hub found
[ 2.426069] hub 1-0:1.0: 15 ports detected
[ 2.427771] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.427774] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.427845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.427846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.427847] usb usb2: Product: xHCI Host Controller
[ 2.427848] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.427848] usb usb2: SerialNumber: 0000:00:14.0
[ 2.427929] hub 2-0:1.0: USB hub found
[ 2.427946] hub 2-0:1.0: 6 ports detected
[ 2.428756] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.428761] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.428777] ehci-pci 0000:00:1a.0: debug port 2
[ 2.432683] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.432695] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000
[ 2.442069] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.442092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.442094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.442095] usb usb3: Product: EHCI Host Controller
[ 2.442096] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.442096] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.442182] hub 3-0:1.0: USB hub found
[ 2.442185] hub 3-0:1.0: 3 ports detected
[ 2.442358] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.442362] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.442372] ehci-pci 0000:00:1d.0: debug port 2
[ 2.446266] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.446276] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7d3b000
[ 2.458071] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.458097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.458099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.458101] usb usb4: Product: EHCI Host Controller
[ 2.458102] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.458103] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.458186] hub 4-0:1.0: USB hub found
[ 2.458189] hub 4-0:1.0: 3 ports detected
[ 2.458318] ahci 0000:00:1f.2: version 3.0
[ 2.458428] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.458447] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.458467] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x7 impl RAID mode
[ 2.458469] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
[ 2.474572] scsi0 : ahci
[ 2.474684] scsi1 : ahci
[ 2.474774] scsi2 : ahci
[ 2.474861] scsi3 : ahci
[ 2.474948] scsi4 : ahci
[ 2.474991] ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 45
[ 2.474994] ata2: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a180 irq 45
[ 2.474996] ata3: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a200 irq 45
[ 2.474997] ata4: DUMMY
[ 2.474998] ata5: DUMMY
[ 2.475319] [drm] Memory usable by graphics device = 2048M
[ 2.475321] [drm] Replacing VGA console driver
[ 2.476302] Console: switching to colour dummy device 80x25
[ 2.530203] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 2.530214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.530215] [drm] Driver supports precise vblank timestamp query.
[ 2.530240] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 2.557247] [drm] VBT doesn't support DRRS
[ 2.738203] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 2.794187] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.794391] ata1.00: ATA-8: OCZ-ARC100, 1.01, max UDMA/133
[ 2.794394] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.795411] ata1.00: configured for UDMA/133
[ 2.795515] scsi 0:0:0:0: Direct-Access ATA OCZ-ARC100 1.01 PQ: 0 ANSI: 5
[ 2.831879] fbcon: inteldrmfb (fb0) is primary device
[ 2.868437] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b
[ 2.868438] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.868439] usb 1-3: Product: USB Receiver
[ 2.868439] usb 1-3: Manufacturer: Logitech
[ 2.869859] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.873292] usbcore: registered new interface driver usbhid
[ 2.873292] usbhid: USB HID core driver
[ 2.874475] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 2.934425] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input6
[ 2.934480] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:14.0-3:1
[ 2.936353] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input7
[ 2.936449] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-3:2
[ 3.034269] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 3.058258] tsc: Refined TSC clocksource calibration: 2893.304 MHz
[ 3.114281] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.116034] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8C2, 1.02, max UDMA/133
[ 3.117490] ata2.00: configured for UDMA/133
[ 3.118892] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8C2 1.02 PQ: 0 ANSI: 5
[ 3.165901] usb 1-9: New USB device found, idVendor=8087, idProduct=07da
[ 3.165903] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.278371] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.410786] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 3.410787] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.410990] hub 3-1:1.0: USB hub found
[ 3.411086] hub 3-1:1.0: 6 ports detected
[ 3.446356] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.448285] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 3.448300] sd 0:0:0:0: [sda] Write Protect is off
[ 3.448301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.448306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.448717] sda: sda1 sda2 sda3
[ 3.448876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.456492] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.456493] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.456577] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.456930] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.456965] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.522395] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 3.654829] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 3.654830] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.655053] hub 4-1:1.0: USB hub found
[ 3.655170] hub 4-1:1.0: 8 ports detected
[ 3.726591] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 3.892190] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=64d0
[ 3.892191] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.892192] usb 3-1.5: Product: Laptop_Integrated_Webcam_HD
[ 3.892193] usb 3-1.5: Manufacturer: CN0767N972487381B6A5A00
[ 3.990500] Console: switching to colour frame buffer device 210x65
[ 3.993232] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.993233] i915 0000:00:02.0: registered panic notifier
[ 4.026972] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 4.027464] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 4.027518] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input8
[ 4.028375] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.058541] Switched to clocksource tsc
[ 4.090648] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 4.090692] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.097930] device-mapper: uevent: version 1.0.3
[ 4.097991] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 4.144101] PM: Starting manual resume from disk
[ 4.144104] PM: Hibernation image partition 8:1 present
[ 4.144105] PM: Looking for hibernation image.
[ 4.144163] PM: Image not found (code -22)
[ 4.144164] PM: Hibernation image not present or could not be loaded.
[ 4.168544] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.331451] systemd-udevd[365]: starting version 215
[ 4.388071] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.388994] ACPI: AC Adapter [AC] (on-line)
[ 4.392055] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 4.395502] parport_pc 00:07: [io 0x0378-0x037b]
[ 4.395553] parport_pc 00:07: [irq 5]
[ 4.415018] cfg80211: Calling CRDA to update world regulatory domain
[ 4.415625] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 4.415749] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 4.415850] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 4.415856] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.418905] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 4.418907] Copyright(c) 2003- 2014 Intel Corporation
[ 4.419065] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 4.424697] Bluetooth: Core ver 2.19
[ 4.424705] NET: Registered protocol family 31
[ 4.424706] Bluetooth: HCI device and connection manager initialized
[ 4.424711] Bluetooth: HCI socket layer initialized
[ 4.424713] Bluetooth: L2CAP socket layer initialized
[ 4.424719] Bluetooth: SCO socket layer initialized
[ 4.429655] sound hdaudioC1D0: autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 4.429657] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 4.429658] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.429659] sound hdaudioC1D0: mono: mono_out=0x0
[ 4.429660] sound hdaudioC1D0: inputs:
[ 4.429661] sound hdaudioC1D0: Dock Mic=0x19
[ 4.429662] sound hdaudioC1D0: Headset Mic=0x1a
[ 4.429663] sound hdaudioC1D0: Internal Mic=0x12
[ 4.436232] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 4.436283] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 4.436343] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 4.436422] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input12
[ 4.436651] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.436679] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.436709] iwlwifi 0000:03:00.0: irq 50 for MSI/MSI-X
[ 4.436818] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.437110] AVX2 version of gcm_enc/dec engaged.
[ 4.437216] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.439322] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.441062] usbcore: registered new interface driver btusb
[ 4.442872] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[ 4.443065] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 4.443712] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.466477] alg: No test for crc32 (crc32-pclmul)
[ 4.469964] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.469966] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.469967] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 4.469968] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 4.470010] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 4.473242] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.473244] Disabling lock debugging due to kernel taint
[ 4.482182] media: Linux media interface: v0.10
[ 4.483772] intel_rapl: Found RAPL domain package
[ 4.483778] intel_rapl: Found RAPL domain core
[ 4.483781] intel_rapl: Found RAPL domain uncore
[ 4.483782] intel_rapl: Found RAPL domain dram
[ 4.484860] Linux video capture interface: v2.00
[ 4.489022] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.489332] input: Dell WMI hotkeys as /devices/virtual/input/input19
[ 4.491319] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d0)
[ 4.498585] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7677 MBytes.
[ 4.498744] <6>[fglrx] vendor: 1002 device: 6606 count: 1
[ 4.498966] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 4.498971] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.503440] <6>[fglrx] Kernel PAT support is enabled
[ 4.503454] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 1 minors
[ 4.506856] iTCO_vendor_support: vendor-support=0
[ 4.506958] ppdev: user-space parallel port driver
[ 4.507374] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.507402] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.507454] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.529161] cfg80211: World regulatory domain updated:
[ 4.529163] cfg80211: DFS Master region: unset
[ 4.529164] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.529166] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529167] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529169] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529171] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.529173] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.529174] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.529176] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529178] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.532171] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input20
[ 4.532250] usbcore: registered new interface driver uvcvideo
[ 4.532251] USB Video Class driver (1.1.1)
[ 4.546870] parport_pc 00:07: activated
[ 4.546873] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.548492] parport_pc 00:07: disabled
[ 4.554218] ACPI: Battery Slot [BAT0] (battery present)
[ 4.658690] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.786770] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.671712] random: nonblocking pool is initialized
[ 5.674748] Adding 8388604k swap on /dev/sda1. Priority:-1 extents:1 across:8388604k SSFS
[ 5.683514] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.722857] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 5.739347] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input21
[ 5.751385] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
[ 5.841161] lp: driver loaded but no devices found
[ 5.897032] fuse init (API version 7.23)
[ 5.981893] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 6.707882] systemd-logind[2116]: New seat seat0.
[ 6.711031] systemd-logind[2116]: Failed to start user service: Unknown unit: user@1000.service
[ 6.712919] systemd-logind[2116]: New session c1 of user maciej.
[ 6.717355] input: BRLTTY 5.2dev Linux Screen Driver Keyboard as /devices/virtual/input/input22
[ 7.250634] systemd-logind[2116]: Removed session c1.
[ 8.658795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.658797] Bluetooth: BNEP filters: protocol multicast
[ 8.658804] Bluetooth: BNEP socket layer initialized
[ 8.667852] systemd-hostnamed[2849]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 8.848794] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.951617] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.951699] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.953129] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 8.959982] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 9.233274] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 9.240020] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 9.327933] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.750928] wlan0: authenticate with d0:2d:b3:54:df:dc
[ 15.755226] wlan0: send auth to d0:2d:b3:54:df:dc (try 1/3)
[ 15.844465] wlan0: authenticated
[ 15.845094] wlan0: associate with d0:2d:b3:54:df:dc (try 1/3)
[ 15.855699] wlan0: RX AssocResp from d0:2d:b3:54:df:dc (capab=0x431 status=0 aid=3)
[ 15.858001] wlan0: associated
[ 15.858023] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.858051] cfg80211: Calling CRDA for country: GB
[ 15.859706] cfg80211: Regulatory domain changed to country: GB
[ 15.859709] cfg80211: DFS Master region: ETSI
[ 15.859710] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.859711] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.859712] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.859713] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.859714] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 15.859715] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 21.680373] systemd-logind[2116]: New session 1 of user maciej.


I have installed iceWM as a 'failsafe dsktop' and I have uninstalled Cinnamon completely and re-installed it and the same thing happens. I got message the same message: Cinnamon just crashed.










share|improve this question
















I did a normal update to the system last night and after reboot my computer just stopped working and keeps falling back to 'fallback mode'. I tried to reinstall Cinnamon without success. I tried to reinstall AIT drivers - no success. Does anyone have ideas?



[    2.083224] i8042: Warning: Keylock active
[ 2.085645] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.085648] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.085731] mousedev: PS/2 mouse device common for all mice
[ 2.085813] rtc_cmos 00:02: RTC can wake from S4
[ 2.085918] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.085949] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.085956] Intel P-state driver initializing.
[ 2.085973] Intel pstate controlling: cpu 0
[ 2.085985] Intel pstate controlling: cpu 1
[ 2.085998] Intel pstate controlling: cpu 2
[ 2.086013] Intel pstate controlling: cpu 3
[ 2.086110] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.087280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.088998] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 2.089001] AMD IOMMUv2 functionality not available on this system
[ 2.089198] TCP: cubic registered
[ 2.089357] NET: Registered protocol family 10
[ 2.089826] mip6: Mobile IPv6
[ 2.089836] NET: Registered protocol family 17
[ 2.089851] mpls_gso: MPLS GSO support
[ 2.090202] registered taskstats version 1
[ 2.090773] rtc_cmos 00:02: setting system clock to 2015-06-25 12:21:04 UTC (1435234864)
[ 2.090837] PM: Hibernation image not present or could not be loaded.
[ 2.091351] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[ 2.091352] Write protecting the kernel read-only data: 8192k
[ 2.092668] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[ 2.093360] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[ 2.112196] systemd-udevd[76]: starting version 215
[ 2.112367] random: systemd-udevd urandom read with 6 bits of entropy available
[ 2.116736] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 2.117422] ACPI: Lid Switch [LID0]
[ 2.117473] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 2.117477] ACPI: Power Button [PBTN]
[ 2.117524] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 2.117526] ACPI: Sleep Button [SBTN]
[ 2.117574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.117576] ACPI: Power Button [PWRF]
[ 2.121219] wmi: Mapper loaded
[ 2.121824] pps_core: LinuxPPS API ver. 1 registered
[ 2.121825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.121968] PTP clock support registered
[ 2.122829] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 2.122830] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 2.123380] ACPI: bus type USB registered
[ 2.123402] usbcore: registered new interface driver usbfs
[ 2.123411] usbcore: registered new interface driver hub
[ 2.123437] [drm] Initialized drm 1.1.0 20060810
[ 2.123450] usbcore: registered new device driver usb
[ 2.123963] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.124135] ehci-pci: EHCI PCI platform driver
[ 2.126105] SCSI subsystem initialized
[ 2.126274] sdhci: Secure Digital Host Controller Interface driver
[ 2.126275] sdhci: Copyright(c) Pierre Ossman
[ 2.126568] sdhci-pci 0000:0e:00.0: SDHCI controller found [1217:8520] (rev 1)
[ 2.127348] libata version 3.00 loaded.
[ 2.162168] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 2.162196] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 2.162243] mmc0: Unknown controller version (3). You may experience problems.
[ 2.162301] mmc0: no vqmmc regulator found
[ 2.162302] mmc0: no vmmc regulator found
[ 2.162423] mmc0: SDHCI controller on PCI [0000:0e:00.0] using ADMA
[ 2.378183] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.378185] ACPI: Thermal Zone [THM] (25 C)
[ 2.425522] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 2.425525] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:1f:af:37:22:9d
[ 2.425526] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 2.425569] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 2.425718] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.425724] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.425815] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.425834] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X
[ 2.425941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.425942] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.425943] usb usb1: Product: xHCI Host Controller
[ 2.425944] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.425945] usb usb1: SerialNumber: 0000:00:14.0
[ 2.426035] hub 1-0:1.0: USB hub found
[ 2.426069] hub 1-0:1.0: 15 ports detected
[ 2.427771] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.427774] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.427845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.427846] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.427847] usb usb2: Product: xHCI Host Controller
[ 2.427848] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 2.427848] usb usb2: SerialNumber: 0000:00:14.0
[ 2.427929] hub 2-0:1.0: USB hub found
[ 2.427946] hub 2-0:1.0: 6 ports detected
[ 2.428756] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.428761] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.428777] ehci-pci 0000:00:1a.0: debug port 2
[ 2.432683] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.432695] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3c000
[ 2.442069] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.442092] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.442094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.442095] usb usb3: Product: EHCI Host Controller
[ 2.442096] usb usb3: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.442096] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.442182] hub 3-0:1.0: USB hub found
[ 2.442185] hub 3-0:1.0: 3 ports detected
[ 2.442358] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.442362] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.442372] ehci-pci 0000:00:1d.0: debug port 2
[ 2.446266] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.446276] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7d3b000
[ 2.458071] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.458097] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.458099] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.458101] usb usb4: Product: EHCI Host Controller
[ 2.458102] usb usb4: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[ 2.458103] usb usb4: SerialNumber: 0000:00:1d.0
[ 2.458186] hub 4-0:1.0: USB hub found
[ 2.458189] hub 4-0:1.0: 3 ports detected
[ 2.458318] ahci 0000:00:1f.2: version 3.0
[ 2.458428] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.458447] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.458467] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 5 ports 6 Gbps 0x7 impl RAID mode
[ 2.458469] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part ems sxs apst
[ 2.474572] scsi0 : ahci
[ 2.474684] scsi1 : ahci
[ 2.474774] scsi2 : ahci
[ 2.474861] scsi3 : ahci
[ 2.474948] scsi4 : ahci
[ 2.474991] ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 45
[ 2.474994] ata2: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a180 irq 45
[ 2.474996] ata3: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a200 irq 45
[ 2.474997] ata4: DUMMY
[ 2.474998] ata5: DUMMY
[ 2.475319] [drm] Memory usable by graphics device = 2048M
[ 2.475321] [drm] Replacing VGA console driver
[ 2.476302] Console: switching to colour dummy device 80x25
[ 2.530203] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 2.530214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.530215] [drm] Driver supports precise vblank timestamp query.
[ 2.530240] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 2.557247] [drm] VBT doesn't support DRRS
[ 2.738203] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 2.794187] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.794391] ata1.00: ATA-8: OCZ-ARC100, 1.01, max UDMA/133
[ 2.794394] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.795411] ata1.00: configured for UDMA/133
[ 2.795515] scsi 0:0:0:0: Direct-Access ATA OCZ-ARC100 1.01 PQ: 0 ANSI: 5
[ 2.831879] fbcon: inteldrmfb (fb0) is primary device
[ 2.868437] usb 1-3: New USB device found, idVendor=046d, idProduct=c52b
[ 2.868438] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.868439] usb 1-3: Product: USB Receiver
[ 2.868439] usb 1-3: Manufacturer: Logitech
[ 2.869859] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.873292] usbcore: registered new interface driver usbhid
[ 2.873292] usbhid: USB HID core driver
[ 2.874475] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 2.934425] input: Logitech Unifying Device. Wireless PID:4002 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input6
[ 2.934480] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4002] on usb-0000:00:14.0-3:1
[ 2.936353] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0005/input/input7
[ 2.936449] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-3:2
[ 3.034269] usb 1-9: new full-speed USB device number 3 using xhci_hcd
[ 3.058258] tsc: Refined TSC clocksource calibration: 2893.304 MHz
[ 3.114281] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.116034] ata2.00: ATAPI: MATSHITA DVD+/-RW UJ8C2, 1.02, max UDMA/133
[ 3.117490] ata2.00: configured for UDMA/133
[ 3.118892] scsi 1:0:0:0: CD-ROM MATSHITA DVD+-RW UJ8C2 1.02 PQ: 0 ANSI: 5
[ 3.165901] usb 1-9: New USB device found, idVendor=8087, idProduct=07da
[ 3.165903] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.278371] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.410786] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 3.410787] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.410990] hub 3-1:1.0: USB hub found
[ 3.411086] hub 3-1:1.0: 6 ports detected
[ 3.446356] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.448285] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 3.448300] sd 0:0:0:0: [sda] Write Protect is off
[ 3.448301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.448306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.448717] sda: sda1 sda2 sda3
[ 3.448876] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.456492] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.456493] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.456577] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.456930] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.456965] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.522395] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 3.654829] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 3.654830] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.655053] hub 4-1:1.0: USB hub found
[ 3.655170] hub 4-1:1.0: 8 ports detected
[ 3.726591] usb 3-1.5: new high-speed USB device number 3 using ehci-pci
[ 3.892190] usb 3-1.5: New USB device found, idVendor=0c45, idProduct=64d0
[ 3.892191] usb 3-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.892192] usb 3-1.5: Product: Laptop_Integrated_Webcam_HD
[ 3.892193] usb 3-1.5: Manufacturer: CN0767N972487381B6A5A00
[ 3.990500] Console: switching to colour frame buffer device 210x65
[ 3.993232] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.993233] i915 0000:00:02.0: registered panic notifier
[ 4.026972] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 4.027464] ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no)
[ 4.027518] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input8
[ 4.028375] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.058541] Switched to clocksource tsc
[ 4.090648] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 4.090692] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.097930] device-mapper: uevent: version 1.0.3
[ 4.097991] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 4.144101] PM: Starting manual resume from disk
[ 4.144104] PM: Hibernation image partition 8:1 present
[ 4.144105] PM: Looking for hibernation image.
[ 4.144163] PM: Image not found (code -22)
[ 4.144164] PM: Hibernation image not present or could not be loaded.
[ 4.168544] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.331451] systemd-udevd[365]: starting version 215
[ 4.388071] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.388994] ACPI: AC Adapter [AC] (on-line)
[ 4.392055] mei_me 0000:00:16.0: irq 47 for MSI/MSI-X
[ 4.395502] parport_pc 00:07: [io 0x0378-0x037b]
[ 4.395553] parport_pc 00:07: [irq 5]
[ 4.415018] cfg80211: Calling CRDA to update world regulatory domain
[ 4.415625] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 4.415749] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 4.415850] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 4.415856] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.418905] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 4.418907] Copyright(c) 2003- 2014 Intel Corporation
[ 4.419065] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 4.424697] Bluetooth: Core ver 2.19
[ 4.424705] NET: Registered protocol family 31
[ 4.424706] Bluetooth: HCI device and connection manager initialized
[ 4.424711] Bluetooth: HCI socket layer initialized
[ 4.424713] Bluetooth: L2CAP socket layer initialized
[ 4.424719] Bluetooth: SCO socket layer initialized
[ 4.429655] sound hdaudioC1D0: autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 4.429657] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 4.429658] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.429659] sound hdaudioC1D0: mono: mono_out=0x0
[ 4.429660] sound hdaudioC1D0: inputs:
[ 4.429661] sound hdaudioC1D0: Dock Mic=0x19
[ 4.429662] sound hdaudioC1D0: Headset Mic=0x1a
[ 4.429663] sound hdaudioC1D0: Internal Mic=0x12
[ 4.436232] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 4.436283] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 4.436343] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 4.436422] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input12
[ 4.436651] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.436679] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.436709] iwlwifi 0000:03:00.0: irq 50 for MSI/MSI-X
[ 4.436818] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.437110] AVX2 version of gcm_enc/dec engaged.
[ 4.437216] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.439322] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 4.441062] usbcore: registered new interface driver btusb
[ 4.442872] iwlwifi 0000:03:00.0: firmware: direct-loading firmware iwlwifi-6000g2b-6.ucode
[ 4.443065] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 4.443712] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.466477] alg: No test for crc32 (crc32-pclmul)
[ 4.469964] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 4.469966] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 4.469967] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 4.469968] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 4.470010] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 4.473242] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 4.473244] Disabling lock debugging due to kernel taint
[ 4.482182] media: Linux media interface: v0.10
[ 4.483772] intel_rapl: Found RAPL domain package
[ 4.483778] intel_rapl: Found RAPL domain core
[ 4.483781] intel_rapl: Found RAPL domain uncore
[ 4.483782] intel_rapl: Found RAPL domain dram
[ 4.484860] Linux video capture interface: v2.00
[ 4.489022] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 4.489332] input: Dell WMI hotkeys as /devices/virtual/input/input19
[ 4.491319] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d0)
[ 4.498585] <6>[fglrx] Maximum main memory to use for locked dma buffers: 7677 MBytes.
[ 4.498744] <6>[fglrx] vendor: 1002 device: 6606 count: 1
[ 4.498966] <6>[fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 4.498971] pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.503440] <6>[fglrx] Kernel PAT support is enabled
[ 4.503454] <6>[fglrx] module loaded - fglrx 14.20.7 [Sep 2 2014] with 1 minors
[ 4.506856] iTCO_vendor_support: vendor-support=0
[ 4.506958] ppdev: user-space parallel port driver
[ 4.507374] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.507402] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.507454] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.529161] cfg80211: World regulatory domain updated:
[ 4.529163] cfg80211: DFS Master region: unset
[ 4.529164] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.529166] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529167] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529169] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529171] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.529173] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.529174] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.529176] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.529178] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.532171] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input20
[ 4.532250] usbcore: registered new interface driver uvcvideo
[ 4.532251] USB Video Class driver (1.1.1)
[ 4.546870] parport_pc 00:07: activated
[ 4.546873] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.548492] parport_pc 00:07: disabled
[ 4.554218] ACPI: Battery Slot [BAT0] (battery present)
[ 4.658690] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.786770] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.671712] random: nonblocking pool is initialized
[ 5.674748] Adding 8388604k swap on /dev/sda1. Priority:-1 extents:1 across:8388604k SSFS
[ 5.683514] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.722857] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 5.739347] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input21
[ 5.751385] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input11
[ 5.841161] lp: driver loaded but no devices found
[ 5.897032] fuse init (API version 7.23)
[ 5.981893] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 6.707882] systemd-logind[2116]: New seat seat0.
[ 6.711031] systemd-logind[2116]: Failed to start user service: Unknown unit: user@1000.service
[ 6.712919] systemd-logind[2116]: New session c1 of user maciej.
[ 6.717355] input: BRLTTY 5.2dev Linux Screen Driver Keyboard as /devices/virtual/input/input22
[ 7.250634] systemd-logind[2116]: Removed session c1.
[ 8.658795] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.658797] Bluetooth: BNEP filters: protocol multicast
[ 8.658804] Bluetooth: BNEP socket layer initialized
[ 8.667852] systemd-hostnamed[2849]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 8.848794] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.951617] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 8.951699] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.953129] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 8.959982] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 9.233274] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 9.240020] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0
[ 9.327933] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.750928] wlan0: authenticate with d0:2d:b3:54:df:dc
[ 15.755226] wlan0: send auth to d0:2d:b3:54:df:dc (try 1/3)
[ 15.844465] wlan0: authenticated
[ 15.845094] wlan0: associate with d0:2d:b3:54:df:dc (try 1/3)
[ 15.855699] wlan0: RX AssocResp from d0:2d:b3:54:df:dc (capab=0x431 status=0 aid=3)
[ 15.858001] wlan0: associated
[ 15.858023] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 15.858051] cfg80211: Calling CRDA for country: GB
[ 15.859706] cfg80211: Regulatory domain changed to country: GB
[ 15.859709] cfg80211: DFS Master region: ETSI
[ 15.859710] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.859711] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.859712] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.859713] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.859714] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 15.859715] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 21.680373] systemd-logind[2116]: New session 1 of user maciej.


I have installed iceWM as a 'failsafe dsktop' and I have uninstalled Cinnamon completely and re-installed it and the same thing happens. I got message the same message: Cinnamon just crashed.







debian linux-mint cinnamon crash






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Feb 10 at 19:22









Rui F Ribeiro

40.5k1479137




40.5k1479137










asked Jun 25 '15 at 10:56









Maciej CyganMaciej Cygan

1015




1015













  • Can you run dmesg or less /var/log/messages in a plain console?

    – Basile Starynkevitch
    Jun 25 '15 at 11:28











  • @BasileStarynkevitch Yes and i can see this error : Failed to start user service : Unknow unit: user@1000.service, Unknown controller version (3). You may experience problems. <-these are red messages

    – Maciej Cygan
    Jun 25 '15 at 11:42











  • Edit your question to show these messages (and the few lines before)

    – Basile Starynkevitch
    Jun 25 '15 at 11:43











  • @BasileStarynkevitch Will try ;) but its not going to be easy since its a fallback mode i can barely do anything ;o!

    – Maciej Cygan
    Jun 25 '15 at 12:13











  • @BasileStarynkevitch Ok so log output attached. The problem only appeared after i did update last night. Before system was working fine.

    – Maciej Cygan
    Jun 25 '15 at 13:40





















  • Can you run dmesg or less /var/log/messages in a plain console?

    – Basile Starynkevitch
    Jun 25 '15 at 11:28











  • @BasileStarynkevitch Yes and i can see this error : Failed to start user service : Unknow unit: user@1000.service, Unknown controller version (3). You may experience problems. <-these are red messages

    – Maciej Cygan
    Jun 25 '15 at 11:42











  • Edit your question to show these messages (and the few lines before)

    – Basile Starynkevitch
    Jun 25 '15 at 11:43











  • @BasileStarynkevitch Will try ;) but its not going to be easy since its a fallback mode i can barely do anything ;o!

    – Maciej Cygan
    Jun 25 '15 at 12:13











  • @BasileStarynkevitch Ok so log output attached. The problem only appeared after i did update last night. Before system was working fine.

    – Maciej Cygan
    Jun 25 '15 at 13:40



















Can you run dmesg or less /var/log/messages in a plain console?

– Basile Starynkevitch
Jun 25 '15 at 11:28





Can you run dmesg or less /var/log/messages in a plain console?

– Basile Starynkevitch
Jun 25 '15 at 11:28













@BasileStarynkevitch Yes and i can see this error : Failed to start user service : Unknow unit: user@1000.service, Unknown controller version (3). You may experience problems. <-these are red messages

– Maciej Cygan
Jun 25 '15 at 11:42





@BasileStarynkevitch Yes and i can see this error : Failed to start user service : Unknow unit: user@1000.service, Unknown controller version (3). You may experience problems. <-these are red messages

– Maciej Cygan
Jun 25 '15 at 11:42













Edit your question to show these messages (and the few lines before)

– Basile Starynkevitch
Jun 25 '15 at 11:43





Edit your question to show these messages (and the few lines before)

– Basile Starynkevitch
Jun 25 '15 at 11:43













@BasileStarynkevitch Will try ;) but its not going to be easy since its a fallback mode i can barely do anything ;o!

– Maciej Cygan
Jun 25 '15 at 12:13





@BasileStarynkevitch Will try ;) but its not going to be easy since its a fallback mode i can barely do anything ;o!

– Maciej Cygan
Jun 25 '15 at 12:13













@BasileStarynkevitch Ok so log output attached. The problem only appeared after i did update last night. Before system was working fine.

– Maciej Cygan
Jun 25 '15 at 13:40







@BasileStarynkevitch Ok so log output attached. The problem only appeared after i did update last night. Before system was working fine.

– Maciej Cygan
Jun 25 '15 at 13:40












0






active

oldest

votes











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "106"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f212094%2flinux-mint-has-just-crashed-jessie-8-lmde%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























0






active

oldest

votes








0






active

oldest

votes









active

oldest

votes






active

oldest

votes
















draft saved

draft discarded




















































Thanks for contributing an answer to Unix & Linux Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2funix.stackexchange.com%2fquestions%2f212094%2flinux-mint-has-just-crashed-jessie-8-lmde%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

How to make a Squid Proxy server?

Is this a new Fibonacci Identity?

19世紀