run vmware-config-tools.pl, AGAIN!

Refer: http://www.laotudou.com/vmware-player-share-folder.html

I noticed most of the answers are pretty ancient.

What worked for me on Ubunt 18.04 (bionic) is:

sudo vmhgfs-fuse .host:/ /mnt/hgfs/ -o allow_other -o uid=1000

That magically mounted all shared folders for me. You might have to do that for a specific folder instead of .host:/. In that case you can find out the share's name wiht vmware-hgfsclient.

If you want them mounted on startup:

# Use shared folders between VMWare guest and host

#+goes in /etc/fstab

.host:/    /mnt/hgfs/    fuse.vmhgfs-fuse    defaults,allow_other,uid=1000     0    0

I choose to mount them on demand and have them ignored by sudo mount -a and the such with the noauto option, because I noticed the shares have an impact on VM performance.

I of course have done sudo apt-get install open-vm-tools open-vm-tools-desktop beforehand. It didn't take anything else as far as I can remember. However, other have claimed a sudo apt-get install build-essential module-assistant linux-headers-virtual linux-image-virtual && dpkg-reconfigure open-vm-tools was necessary.

[UPDATE 2017-05-18] This answer is outdated for Ubuntu newer than 15.10 (Wiley). The executable vmware-hgfsmounter has not been available in Ubuntu since 16.04LTS (xenial). Although, hgfsmounter may still be available on other Linux distributions, since the hgfsmounter function is still currently available in the upstream source code on GitHub. If anyone has updated information, please comment or edit this answer, instead of down-voting, as I believe this answer may still be valid for older Ubuntu releases.

This answer also assumes that you are not using VMWare Tools from VMWare but instead using open-vm-tools from your Linux distribution. VMWare decided to support this switch in 2015. See KB2073803. Therefore this answer also assumes that your version of Ubuntu can install the open-vm-tools from it's software repository.

OUTDATED FOR UBUNTU > 15.10 (Wiley)

This worked for me using open-vm-tools from Ubuntu Software Center (trusty-14.04LTS shown - please see update above):

cd /mnt

sudo mkdir hgfs

sudo vmware-hgfsmounter .host:/`vmware-hgfsclient` /mnt/hgfs

assuming of course that I had already enabled a shared folder from the host machine in VMware Player settings.

Note that vmware-hgfsclient returns the list of shared folders that are enabled in the VMware Player settings. This function is available for both open-vm-tools and vmware-tools.

Also note that vmware-hgfsmounter is equivalent to

mount -t vmhgfs .host:/win7share /mnt/hgfs

or to adding to your /etc/fstab file

.host:/win7share /mnt/hgfs vmhgfs defaults 0 0

But the vmware-hgfsmounter function is not available using the official vmware-tools from VMware that ships with the current VMware player. Therefore, as the currently accepted answer suggests, running the vmware-config-tools.pl -d fixes the problem.

I had this exact problem. It turned out IT had installed some old version of VMWare tools with non-functioning vmhgfs kernel module.

My solution was to run the configuration with the clobber-kernel-modules setting to overwrite the existing vmhgfs module.

 sudo vmware-config-tools.pl -d --clobber-kernel-modules=vmhgfs

The -d selects all the defaults for you (remove it if you don't want the defaults).

open-vm-tools would NOT build kernel modules until I first installed linux-headers-virtual (paired with linux-image-virtual of course). as soon as I installed the headers package, dpkg-reconfigure open-vm-tools resulted in successfully building and loading the kernel modules, specifically the vmhgfs module.

I had a similar problem. The folder /mnt/hgfs/ appeared back again when I assured that open-vm was uninstalled. As follows

sudo apt-get purge open-vm-tools

sudo apt-get purge open-vm-tools-dkms

and reinstalled vmware-tools

vmware-tools-patches worked for me; give this a shot if nothing else works

I've tested this on a fresh install (easy install) of ubuntu 16.10 on vmware workstation 12 pro

1. Go to https://github.com/rasa/vmware-tools-patches
   


2. 
   

   Follow the Quickest Start instructions given there. Reproduced here:

   
   
   

   $ git clone https://github.com/rasa/vmware-tools-patches.git
   
   $ cd vmware-tools-patches
   
   $ ./patched-open-vm-tools.sh
   
   

   
   

You need to install the VMWare tools first, after that the vmware-config-tools can be used globally. For a more detailed guide, you can see here.

I've been having the same problem but I think I have just been able to make some progress.

Type vmware-hfgs and then press the <Tab> key which will show you that there is also a vmware-hgfsmounter command. If you call that without any options it will print some help that shows you how to call this as part of the `mount' command. Using that info I then ran the following which worked for me:

cd /mnt

sudo mkdir win7share

sudo mount -t vmhgfs .host:/win7share /mnt/win7share

I was then able to access the Win 7 share and copy files to and from there.

If you want to make this permanent then I suspect that you will need to edit the /etc/fstab file but I can't help you there yet.

(applies to Mac VMware Fusion and Ubuntu file sharing)
When you are asked in vmware-config-tools.pl about whether you want HGFS, say yes! (The default is 'no' and you may have skipped over it when hitting enter). This should give you /mnt/hgfs after the tools are installed.

If you can't still mount shared folders after installing vmware-tools, here is the resolution.

Previously, I couldn't mount windows shared folder after installing vmware tools. I didn't see any folders under /mnt/hgfs.

Finally, I got resolved this share folder mounting issue by installing open-vm-dkms.

Here are steps:

1. Ensure configured shared folder in VMWare Player



2. 
   

   Install open-vm0dkms:

   
   
   

   sudo apt-get install open-vm-dkms
   
   

   
   



3. Hit the "Enter" all the way to allow default value



4. 
   

   Mount Windows shared folder to Ubuntu VM:

   
   
   

   sudo mount  -t  vmhgfs  .host:/     /mnt/hgfs 
   
   

   
   


5. 
   

   check if mounting is successful

   
   
   

   df -kh
   
   

   
   
   

   You should see:

   
   
   

   .host:/         57657252 50247088   7410164  88% /mnt/hgfs
   
   

   
   
   

   Also check again if any folders under /mnt/hgfs. You should see folders under which.

   
   


6. 
   

   Auto mount shared folder on startup

   
   
   

   There is a startup script called “open-vm-tools” with in /etc/init.d/ folder. Just add the below line in the start function.

   
   
   

   sudo mount  -t  vmhgfs  .host:/     /mnt/hgfs
   
   

   
   

Hope it can help.

A workaround for this problem is to edit 'inode.c' and change the line '888' to remove 'compat_truncate' function call (that is responsible for this problem on kernels 3.8.x). This file is inside 'vmware-tools-distrib', so you need to perform the following steps:

Extract VMWare-Tools (probably you will get a folder called vmware-tools-distrib).
Then:

 cd /vmware-tools-distrib/lib/modules/source

 tar xf vmhgfs.tar

 cd vmhgfs-only/

 sudo gedit inode.c

Go to line 888:

 result = compat_vmtruncate(inode, newSize);

And change it to:

 result = 0;

Then save the file and exit gedit.

 cd ..

 rm -rf vmhgfs.tar

 tar cf vmhgfs.tar vmhgfs-only/

 rm -rf vmhgfs-only/

Now restart the installing procedure. It worked for me in Xubuntu 13.04.

Src:
http://ubuntuforums.org/showthread.php?t=2136277&page=4&p=12709627#post12709627