Move existing Windows 7 or 10 installation to new computer?
I have a Windows 7 64-bit installation on my current PC, and I want to move it to a new PC .. I do NOT have a problem with licensing, as the new system already has its own new Windows 7 license, which I intend to use.
I want to use my existing installation, because it has 3 years worth of installed office related software development software, which installing again could take weeks !
I'm assuming that I can use Windows 7's Backup and Restore feature to backup a system image to a network location, then restore that network stored system image on the new PC ?
Again, like I said, I don't have a WIndows 7 licensing issue, as both machines are corporate provided and come with their own licences.
windows-7 backup system-restore windows-backup disk-image
edited Apr 20 '17 at 8:24
Matthew Lock
3,69922341
asked Sep 13 '13 at 12:27
AhmadAhmad
2753818
|
show 1 more comment
I have a Windows 7 64-bit installation on my current PC, and I want to move it to a new PC .. I do NOT have a problem with licensing, as the new system already has its own new Windows 7 license, which I intend to use.
I want to use my existing installation, because it has 3 years worth of installed office related software development software, which installing again could take weeks !
I'm assuming that I can use Windows 7's Backup and Restore feature to backup a system image to a network location, then restore that network stored system image on the new PC ?
Again, like I said, I don't have a WIndows 7 licensing issue, as both machines are corporate provided and come with their own licences.
windows-7 backup system-restore windows-backup disk-image
edited Apr 20 '17 at 8:24
Matthew Lock
3,69922341
asked Sep 13 '13 at 12:27
AhmadAhmad
2753818
3
The Windows 7 Back and Restore feature will NOT transfer your applications you would have to reinstall those if you used that option. Acronis True Image and other alternatives has the ability to migrate an image to different hardware. You can do it yourself by putting Windows into a mode, but its not easy, and might simply be worth the small amount of money to do it with speciailized software.
– Ramhound
Sep 13 '13 at 12:33
Is the hardware the same or different? You may have some driver issues if you just try to do a clone from one hard drive to another, though Win 7 is far better than previous OSes at sorting out hardware changes.
– trpt4him
Sep 13 '13 at 12:46
I don't mind the occasional driver issues, as long as my software environments run out of the box. @Ramhound, which software are you specifically suggesting which has better migration capabilities ? Acronis True Image ? Will it move the entire Windows 7 installation, including all installed stuff and files, without causing any boot/incompatiblity problems on destination PC ?
– Ahmad
Sep 13 '13 at 12:50
Also, the hardware is different between the two PCs .. Different motherboard, different CPU (both are Intel though), more RAM, etc ..
– Ahmad
Sep 13 '13 at 12:51
2
@Ahmad -Acronis True Image 2014 Premiumdoes have the ability to migrate your Windows installation from PC A to PC B where PC B has entirely different hardware. This of course requires two licenses and for you to manually change the license and reactivate the installation. There are other alternatives that do this, in exactly the same way, Acronis does it. Like I said you can place Windows into a migration mode, duplicate the HDD, and Windows would install the required drivers to boot.
– Ramhound
Sep 13 '13 at 13:35
|
show 1 more comment
I have a Windows 7 64-bit installation on my current PC, and I want to move it to a new PC .. I do NOT have a problem with licensing, as the new system already has its own new Windows 7 license, which I intend to use.
I want to use my existing installation, because it has 3 years worth of installed office related software development software, which installing again could take weeks !
I'm assuming that I can use Windows 7's Backup and Restore feature to backup a system image to a network location, then restore that network stored system image on the new PC ?
Again, like I said, I don't have a WIndows 7 licensing issue, as both machines are corporate provided and come with their own licences.
windows-7 backup system-restore windows-backup disk-image
edited Apr 20 '17 at 8:24
Matthew Lock
3,69922341
asked Sep 13 '13 at 12:27
AhmadAhmad
2753818
I have a Windows 7 64-bit installation on my current PC, and I want to move it to a new PC .. I do NOT have a problem with licensing, as the new system already has its own new Windows 7 license, which I intend to use.
I want to use my existing installation, because it has 3 years worth of installed office related software development software, which installing again could take weeks !
I'm assuming that I can use Windows 7's Backup and Restore feature to backup a system image to a network location, then restore that network stored system image on the new PC ?
Again, like I said, I don't have a WIndows 7 licensing issue, as both machines are corporate provided and come with their own licences.
windows-7 backup system-restore windows-backup disk-image
windows-7 backup system-restore windows-backup disk-image
edited Apr 20 '17 at 8:24
Matthew Lock
3,69922341
asked Sep 13 '13 at 12:27
AhmadAhmad
2753818
edited Apr 20 '17 at 8:24
Matthew Lock
3,69922341
asked Sep 13 '13 at 12:27
AhmadAhmad
2753818
edited Apr 20 '17 at 8:24
Matthew Lock
3,69922341
edited Apr 20 '17 at 8:24
Matthew Lock
3,69922341
edited Apr 20 '17 at 8:24
Matthew Lock
3,69922341
3,69922341
asked Sep 13 '13 at 12:27
AhmadAhmad
2753818
asked Sep 13 '13 at 12:27
AhmadAhmad
2753818
asked Sep 13 '13 at 12:27
AhmadAhmad
2753818
2753818
3
The Windows 7 Back and Restore feature will NOT transfer your applications you would have to reinstall those if you used that option. Acronis True Image and other alternatives has the ability to migrate an image to different hardware. You can do it yourself by putting Windows into a mode, but its not easy, and might simply be worth the small amount of money to do it with speciailized software.
– Ramhound
Sep 13 '13 at 12:33
Is the hardware the same or different? You may have some driver issues if you just try to do a clone from one hard drive to another, though Win 7 is far better than previous OSes at sorting out hardware changes.
– trpt4him
Sep 13 '13 at 12:46
I don't mind the occasional driver issues, as long as my software environments run out of the box. @Ramhound, which software are you specifically suggesting which has better migration capabilities ? Acronis True Image ? Will it move the entire Windows 7 installation, including all installed stuff and files, without causing any boot/incompatiblity problems on destination PC ?
– Ahmad
Sep 13 '13 at 12:50
Also, the hardware is different between the two PCs .. Different motherboard, different CPU (both are Intel though), more RAM, etc ..
– Ahmad
Sep 13 '13 at 12:51
2
@Ahmad -Acronis True Image 2014 Premiumdoes have the ability to migrate your Windows installation from PC A to PC B where PC B has entirely different hardware. This of course requires two licenses and for you to manually change the license and reactivate the installation. There are other alternatives that do this, in exactly the same way, Acronis does it. Like I said you can place Windows into a migration mode, duplicate the HDD, and Windows would install the required drivers to boot.
– Ramhound
Sep 13 '13 at 13:35
|
show 1 more comment
3
The Windows 7 Back and Restore feature will NOT transfer your applications you would have to reinstall those if you used that option. Acronis True Image and other alternatives has the ability to migrate an image to different hardware. You can do it yourself by putting Windows into a mode, but its not easy, and might simply be worth the small amount of money to do it with speciailized software.
– Ramhound
Sep 13 '13 at 12:33
Is the hardware the same or different? You may have some driver issues if you just try to do a clone from one hard drive to another, though Win 7 is far better than previous OSes at sorting out hardware changes.
– trpt4him
Sep 13 '13 at 12:46
I don't mind the occasional driver issues, as long as my software environments run out of the box. @Ramhound, which software are you specifically suggesting which has better migration capabilities ? Acronis True Image ? Will it move the entire Windows 7 installation, including all installed stuff and files, without causing any boot/incompatiblity problems on destination PC ?
– Ahmad
Sep 13 '13 at 12:50
Also, the hardware is different between the two PCs .. Different motherboard, different CPU (both are Intel though), more RAM, etc ..
– Ahmad
Sep 13 '13 at 12:51
2
@Ahmad -Acronis True Image 2014 Premiumdoes have the ability to migrate your Windows installation from PC A to PC B where PC B has entirely different hardware. This of course requires two licenses and for you to manually change the license and reactivate the installation. There are other alternatives that do this, in exactly the same way, Acronis does it. Like I said you can place Windows into a migration mode, duplicate the HDD, and Windows would install the required drivers to boot.
– Ramhound
Sep 13 '13 at 13:35
3
3
The Windows 7 Back and Restore feature will NOT transfer your applications you would have to reinstall those if you used that option. Acronis True Image and other alternatives has the ability to migrate an image to different hardware. You can do it yourself by putting Windows into a mode, but its not easy, and might simply be worth the small amount of money to do it with speciailized software.
– Ramhound
Sep 13 '13 at 12:33
The Windows 7 Back and Restore feature will NOT transfer your applications you would have to reinstall those if you used that option. Acronis True Image and other alternatives has the ability to migrate an image to different hardware. You can do it yourself by putting Windows into a mode, but its not easy, and might simply be worth the small amount of money to do it with speciailized software.
– Ramhound
Sep 13 '13 at 12:33
Is the hardware the same or different? You may have some driver issues if you just try to do a clone from one hard drive to another, though Win 7 is far better than previous OSes at sorting out hardware changes.
– trpt4him
Sep 13 '13 at 12:46
Is the hardware the same or different? You may have some driver issues if you just try to do a clone from one hard drive to another, though Win 7 is far better than previous OSes at sorting out hardware changes.
– trpt4him
Sep 13 '13 at 12:46
I don't mind the occasional driver issues, as long as my software environments run out of the box. @Ramhound, which software are you specifically suggesting which has better migration capabilities ? Acronis True Image ? Will it move the entire Windows 7 installation, including all installed stuff and files, without causing any boot/incompatiblity problems on destination PC ?
– Ahmad
Sep 13 '13 at 12:50
I don't mind the occasional driver issues, as long as my software environments run out of the box. @Ramhound, which software are you specifically suggesting which has better migration capabilities ? Acronis True Image ? Will it move the entire Windows 7 installation, including all installed stuff and files, without causing any boot/incompatiblity problems on destination PC ?
– Ahmad
Sep 13 '13 at 12:50
Also, the hardware is different between the two PCs .. Different motherboard, different CPU (both are Intel though), more RAM, etc ..
– Ahmad
Sep 13 '13 at 12:51
Also, the hardware is different between the two PCs .. Different motherboard, different CPU (both are Intel though), more RAM, etc ..
– Ahmad
Sep 13 '13 at 12:51
2
2
@Ahmad -
Acronis True Image 2014 Premium does have the ability to migrate your Windows installation from PC A to PC B where PC B has entirely different hardware. This of course requires two licenses and for you to manually change the license and reactivate the installation. There are other alternatives that do this, in exactly the same way, Acronis does it. Like I said you can place Windows into a migration mode, duplicate the HDD, and Windows would install the required drivers to boot.– Ramhound
Sep 13 '13 at 13:35
@Ahmad -
Acronis True Image 2014 Premium does have the ability to migrate your Windows installation from PC A to PC B where PC B has entirely different hardware. This of course requires two licenses and for you to manually change the license and reactivate the installation. There are other alternatives that do this, in exactly the same way, Acronis does it. Like I said you can place Windows into a migration mode, duplicate the HDD, and Windows would install the required drivers to boot.– Ramhound
Sep 13 '13 at 13:35
|
show 1 more comment
4 Answers
4
active
oldest
votes
Short answer: you have to run sysprep on your old PC, shut it down and move the drive to the new PC.
Long answer: Sysprep is one way only and it strips Windows from all hardware drivers, once you run it, you'd have to install drivers on your old PC as well. You need to create a backup of your Windows in case something will go wrong.
Use the following procedure if you have a spare new drive:
- Clone old drive to the new disk, connected via USB to old PC (use gparted or clonezilla live CD)
- Swap disks and boot old PC from new drive
- Ensure you have the product key as Windows 10 may require it after booting in new PC
- Run sysprep on old PC with new drive, shutdown old PC
- Put the new drive in new PC, boot and see how and if it works.
This way you will still have an untouched old drive that you can still use.
edited Apr 20 '17 at 8:23
Matthew Lock
3,69922341
answered Mar 31 '14 at 23:27
Alec IstominAlec Istomin
46958
1
This is the easiest way to move an existing W7 installation i have ever found, sysprep is built into W7 also, it can be found in C:WindowsSystem32sysprep
– Moab
May 19 '15 at 23:09
I ransysprep /generalizebut I can't get the drive to boot on the new machine; the new drive boots on the old machine but not the new one, not even in safe mode. The processor is different and I'm sure it doesn't have the driver for it. How do I fix it?
– bgmCoder
Mar 6 '16 at 20:21
@bgmCoder Does windows start booting and then crashes or boot sequence not even starting?
– Alec Istomin
Mar 9 '16 at 4:10
@AlecIstomin Ah, I ended up doing a fresh install and moving everything manually; took me all night. But yes, windows would start booting and then crash.
– bgmCoder
Mar 9 '16 at 16:44
add a comment |
Connect the new PC's hard disk to your old PC and mirror the old hard disk using GParted. I think it even allows mirroring over networks, but I don't have any experience doing that.
Once done, move the hard disk back to your new PC. The system most likely won't boot up properly, so use Windows 7's restore console. It should be able to fix the issues during two or three attempts.
Important: Don't try to mirror your old hard disk using tools such as Norton Ghost. I've done this in the past and it will modify your old hard disk trying to add bootup entries for the new disk (which never worked for me; i.e. I've been sitting there with an unbootable source disk). So it didn't even do a proper backup.
answered Sep 13 '13 at 12:41
MarioMario
3,60721519
I don't know... if you were trying to grab an image from a disk and ended up messing up that disk, I think you may have done something wrong. I've used Ghost in the past and have never seen it modify the source image like that.
– trpt4him
Sep 13 '13 at 12:46
Just used it's "mirror disk" function or whatever it's been called. It tried to add the new disk to the old disk's boot manager for whatever reason.
– Mario
Sep 14 '13 at 16:02
add a comment |
It's easy: use Pen Drive Linux and Ubuntu to perform a bitwise clone to the new storage device. (Be sure the new storage device is at least as large as the old one.) Disk cloning instructions are here.
Afterwards, if Windows won't boot, you can download the critical chipset drivers and install them from the Windows install media's Recovery Console with DISM. This is more an issue for Windows 7, as Windows 10 is pretty good here. Once Windows is booting, install any remaining drivers and you should be good to go.
answered Feb 10 at 7:09
R.J. DunnillR.J. Dunnill
1015
add a comment |
Use applications like:
Paragon Drive Copy 14 Professional
Features: Upgrade your hard drive to a new one, Migrate to new hardware and more.
FarStone TotalRecovery Pro & Server
Features: Disk Imaging (backs up files, Windows, and partitions) and more.
KLS Backup 2013 Professional
Features: Backup of databases (Microsoft SQL Server, MySQL) and application data (Outlook, Thunderbird) and more.
answered Dec 11 '14 at 14:37
DavidenkoDavidenko
1,14331529
None of these descriptions sound like they'll move an existing installation to a new machine intact. Moving to a new hard drive doesn't count.
– Twisty Impersonator
Jan 5 '18 at 0:49
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f644862%2fmove-existing-windows-7-or-10-installation-to-new-computer%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
4 Answers
4
active
oldest
votes
4 Answers
4
active
oldest
votes
active
oldest
votes
active
oldest
votes
Short answer: you have to run sysprep on your old PC, shut it down and move the drive to the new PC.
Long answer: Sysprep is one way only and it strips Windows from all hardware drivers, once you run it, you'd have to install drivers on your old PC as well. You need to create a backup of your Windows in case something will go wrong.
Use the following procedure if you have a spare new drive:
- Clone old drive to the new disk, connected via USB to old PC (use gparted or clonezilla live CD)
- Swap disks and boot old PC from new drive
- Ensure you have the product key as Windows 10 may require it after booting in new PC
- Run sysprep on old PC with new drive, shutdown old PC
- Put the new drive in new PC, boot and see how and if it works.
This way you will still have an untouched old drive that you can still use.
edited Apr 20 '17 at 8:23
Matthew Lock
3,69922341
answered Mar 31 '14 at 23:27
Alec IstominAlec Istomin
46958
1
This is the easiest way to move an existing W7 installation i have ever found, sysprep is built into W7 also, it can be found in C:WindowsSystem32sysprep
– Moab
May 19 '15 at 23:09
I ransysprep /generalizebut I can't get the drive to boot on the new machine; the new drive boots on the old machine but not the new one, not even in safe mode. The processor is different and I'm sure it doesn't have the driver for it. How do I fix it?
– bgmCoder
Mar 6 '16 at 20:21
@bgmCoder Does windows start booting and then crashes or boot sequence not even starting?
– Alec Istomin
Mar 9 '16 at 4:10
@AlecIstomin Ah, I ended up doing a fresh install and moving everything manually; took me all night. But yes, windows would start booting and then crash.
– bgmCoder
Mar 9 '16 at 16:44
add a comment |
Short answer: you have to run sysprep on your old PC, shut it down and move the drive to the new PC.
Long answer: Sysprep is one way only and it strips Windows from all hardware drivers, once you run it, you'd have to install drivers on your old PC as well. You need to create a backup of your Windows in case something will go wrong.
Use the following procedure if you have a spare new drive:
- Clone old drive to the new disk, connected via USB to old PC (use gparted or clonezilla live CD)
- Swap disks and boot old PC from new drive
- Ensure you have the product key as Windows 10 may require it after booting in new PC
- Run sysprep on old PC with new drive, shutdown old PC
- Put the new drive in new PC, boot and see how and if it works.
This way you will still have an untouched old drive that you can still use.
edited Apr 20 '17 at 8:23
Matthew Lock
3,69922341
answered Mar 31 '14 at 23:27
Alec IstominAlec Istomin
46958
1
This is the easiest way to move an existing W7 installation i have ever found, sysprep is built into W7 also, it can be found in C:WindowsSystem32sysprep
– Moab
May 19 '15 at 23:09
I ransysprep /generalizebut I can't get the drive to boot on the new machine; the new drive boots on the old machine but not the new one, not even in safe mode. The processor is different and I'm sure it doesn't have the driver for it. How do I fix it?
– bgmCoder
Mar 6 '16 at 20:21
@bgmCoder Does windows start booting and then crashes or boot sequence not even starting?
– Alec Istomin
Mar 9 '16 at 4:10
@AlecIstomin Ah, I ended up doing a fresh install and moving everything manually; took me all night. But yes, windows would start booting and then crash.
– bgmCoder
Mar 9 '16 at 16:44
add a comment |
Short answer: you have to run sysprep on your old PC, shut it down and move the drive to the new PC.
Long answer: Sysprep is one way only and it strips Windows from all hardware drivers, once you run it, you'd have to install drivers on your old PC as well. You need to create a backup of your Windows in case something will go wrong.
Use the following procedure if you have a spare new drive:
- Clone old drive to the new disk, connected via USB to old PC (use gparted or clonezilla live CD)
- Swap disks and boot old PC from new drive
- Ensure you have the product key as Windows 10 may require it after booting in new PC
- Run sysprep on old PC with new drive, shutdown old PC
- Put the new drive in new PC, boot and see how and if it works.
This way you will still have an untouched old drive that you can still use.
edited Apr 20 '17 at 8:23
Matthew Lock
3,69922341
answered Mar 31 '14 at 23:27
Alec IstominAlec Istomin
46958
Short answer: you have to run sysprep on your old PC, shut it down and move the drive to the new PC.
Long answer: Sysprep is one way only and it strips Windows from all hardware drivers, once you run it, you'd have to install drivers on your old PC as well. You need to create a backup of your Windows in case something will go wrong.
Use the following procedure if you have a spare new drive:
- Clone old drive to the new disk, connected via USB to old PC (use gparted or clonezilla live CD)
- Swap disks and boot old PC from new drive
- Ensure you have the product key as Windows 10 may require it after booting in new PC
- Run sysprep on old PC with new drive, shutdown old PC
- Put the new drive in new PC, boot and see how and if it works.
This way you will still have an untouched old drive that you can still use.
edited Apr 20 '17 at 8:23
Matthew Lock
3,69922341
answered Mar 31 '14 at 23:27
Alec IstominAlec Istomin
46958
edited Apr 20 '17 at 8:23
Matthew Lock
3,69922341
edited Apr 20 '17 at 8:23
Matthew Lock
3,69922341
edited Apr 20 '17 at 8:23
Matthew Lock
3,69922341
3,69922341
answered Mar 31 '14 at 23:27
Alec IstominAlec Istomin
46958
answered Mar 31 '14 at 23:27
Alec IstominAlec Istomin
46958
answered Mar 31 '14 at 23:27
Alec IstominAlec Istomin
46958
46958
1
This is the easiest way to move an existing W7 installation i have ever found, sysprep is built into W7 also, it can be found in C:WindowsSystem32sysprep
– Moab
May 19 '15 at 23:09
I ransysprep /generalizebut I can't get the drive to boot on the new machine; the new drive boots on the old machine but not the new one, not even in safe mode. The processor is different and I'm sure it doesn't have the driver for it. How do I fix it?
– bgmCoder
Mar 6 '16 at 20:21
@bgmCoder Does windows start booting and then crashes or boot sequence not even starting?
– Alec Istomin
Mar 9 '16 at 4:10
@AlecIstomin Ah, I ended up doing a fresh install and moving everything manually; took me all night. But yes, windows would start booting and then crash.
– bgmCoder
Mar 9 '16 at 16:44
add a comment |
1
This is the easiest way to move an existing W7 installation i have ever found, sysprep is built into W7 also, it can be found in C:WindowsSystem32sysprep
– Moab
May 19 '15 at 23:09
I ransysprep /generalizebut I can't get the drive to boot on the new machine; the new drive boots on the old machine but not the new one, not even in safe mode. The processor is different and I'm sure it doesn't have the driver for it. How do I fix it?
– bgmCoder
Mar 6 '16 at 20:21
@bgmCoder Does windows start booting and then crashes or boot sequence not even starting?
– Alec Istomin
Mar 9 '16 at 4:10
@AlecIstomin Ah, I ended up doing a fresh install and moving everything manually; took me all night. But yes, windows would start booting and then crash.
– bgmCoder
Mar 9 '16 at 16:44
1
1
This is the easiest way to move an existing W7 installation i have ever found, sysprep is built into W7 also, it can be found in C:WindowsSystem32sysprep
– Moab
May 19 '15 at 23:09
This is the easiest way to move an existing W7 installation i have ever found, sysprep is built into W7 also, it can be found in C:WindowsSystem32sysprep
– Moab
May 19 '15 at 23:09
I ran
sysprep /generalize but I can't get the drive to boot on the new machine; the new drive boots on the old machine but not the new one, not even in safe mode. The processor is different and I'm sure it doesn't have the driver for it. How do I fix it?– bgmCoder
Mar 6 '16 at 20:21
I ran
sysprep /generalize but I can't get the drive to boot on the new machine; the new drive boots on the old machine but not the new one, not even in safe mode. The processor is different and I'm sure it doesn't have the driver for it. How do I fix it?– bgmCoder
Mar 6 '16 at 20:21
@bgmCoder Does windows start booting and then crashes or boot sequence not even starting?
– Alec Istomin
Mar 9 '16 at 4:10
@bgmCoder Does windows start booting and then crashes or boot sequence not even starting?
– Alec Istomin
Mar 9 '16 at 4:10
@AlecIstomin Ah, I ended up doing a fresh install and moving everything manually; took me all night. But yes, windows would start booting and then crash.
– bgmCoder
Mar 9 '16 at 16:44
@AlecIstomin Ah, I ended up doing a fresh install and moving everything manually; took me all night. But yes, windows would start booting and then crash.
– bgmCoder
Mar 9 '16 at 16:44
add a comment |
Connect the new PC's hard disk to your old PC and mirror the old hard disk using GParted. I think it even allows mirroring over networks, but I don't have any experience doing that.
Once done, move the hard disk back to your new PC. The system most likely won't boot up properly, so use Windows 7's restore console. It should be able to fix the issues during two or three attempts.
Important: Don't try to mirror your old hard disk using tools such as Norton Ghost. I've done this in the past and it will modify your old hard disk trying to add bootup entries for the new disk (which never worked for me; i.e. I've been sitting there with an unbootable source disk). So it didn't even do a proper backup.
answered Sep 13 '13 at 12:41
MarioMario
3,60721519
I don't know... if you were trying to grab an image from a disk and ended up messing up that disk, I think you may have done something wrong. I've used Ghost in the past and have never seen it modify the source image like that.
– trpt4him
Sep 13 '13 at 12:46
Just used it's "mirror disk" function or whatever it's been called. It tried to add the new disk to the old disk's boot manager for whatever reason.
– Mario
Sep 14 '13 at 16:02
add a comment |
Connect the new PC's hard disk to your old PC and mirror the old hard disk using GParted. I think it even allows mirroring over networks, but I don't have any experience doing that.
Once done, move the hard disk back to your new PC. The system most likely won't boot up properly, so use Windows 7's restore console. It should be able to fix the issues during two or three attempts.
Important: Don't try to mirror your old hard disk using tools such as Norton Ghost. I've done this in the past and it will modify your old hard disk trying to add bootup entries for the new disk (which never worked for me; i.e. I've been sitting there with an unbootable source disk). So it didn't even do a proper backup.
answered Sep 13 '13 at 12:41
MarioMario
3,60721519
I don't know... if you were trying to grab an image from a disk and ended up messing up that disk, I think you may have done something wrong. I've used Ghost in the past and have never seen it modify the source image like that.
– trpt4him
Sep 13 '13 at 12:46
Just used it's "mirror disk" function or whatever it's been called. It tried to add the new disk to the old disk's boot manager for whatever reason.
– Mario
Sep 14 '13 at 16:02
add a comment |
Connect the new PC's hard disk to your old PC and mirror the old hard disk using GParted. I think it even allows mirroring over networks, but I don't have any experience doing that.
Once done, move the hard disk back to your new PC. The system most likely won't boot up properly, so use Windows 7's restore console. It should be able to fix the issues during two or three attempts.
Important: Don't try to mirror your old hard disk using tools such as Norton Ghost. I've done this in the past and it will modify your old hard disk trying to add bootup entries for the new disk (which never worked for me; i.e. I've been sitting there with an unbootable source disk). So it didn't even do a proper backup.
answered Sep 13 '13 at 12:41
MarioMario
3,60721519
Connect the new PC's hard disk to your old PC and mirror the old hard disk using GParted. I think it even allows mirroring over networks, but I don't have any experience doing that.
Once done, move the hard disk back to your new PC. The system most likely won't boot up properly, so use Windows 7's restore console. It should be able to fix the issues during two or three attempts.
Important: Don't try to mirror your old hard disk using tools such as Norton Ghost. I've done this in the past and it will modify your old hard disk trying to add bootup entries for the new disk (which never worked for me; i.e. I've been sitting there with an unbootable source disk). So it didn't even do a proper backup.
answered Sep 13 '13 at 12:41
MarioMario
3,60721519
answered Sep 13 '13 at 12:41
MarioMario
3,60721519
answered Sep 13 '13 at 12:41
MarioMario
3,60721519
answered Sep 13 '13 at 12:41
MarioMario
3,60721519
3,60721519
I don't know... if you were trying to grab an image from a disk and ended up messing up that disk, I think you may have done something wrong. I've used Ghost in the past and have never seen it modify the source image like that.
– trpt4him
Sep 13 '13 at 12:46
Just used it's "mirror disk" function or whatever it's been called. It tried to add the new disk to the old disk's boot manager for whatever reason.
– Mario
Sep 14 '13 at 16:02
add a comment |
I don't know... if you were trying to grab an image from a disk and ended up messing up that disk, I think you may have done something wrong. I've used Ghost in the past and have never seen it modify the source image like that.
– trpt4him
Sep 13 '13 at 12:46
Just used it's "mirror disk" function or whatever it's been called. It tried to add the new disk to the old disk's boot manager for whatever reason.
– Mario
Sep 14 '13 at 16:02
I don't know... if you were trying to grab an image from a disk and ended up messing up that disk, I think you may have done something wrong. I've used Ghost in the past and have never seen it modify the source image like that.
– trpt4him
Sep 13 '13 at 12:46
I don't know... if you were trying to grab an image from a disk and ended up messing up that disk, I think you may have done something wrong. I've used Ghost in the past and have never seen it modify the source image like that.
– trpt4him
Sep 13 '13 at 12:46
Just used it's "mirror disk" function or whatever it's been called. It tried to add the new disk to the old disk's boot manager for whatever reason.
– Mario
Sep 14 '13 at 16:02
Just used it's "mirror disk" function or whatever it's been called. It tried to add the new disk to the old disk's boot manager for whatever reason.
– Mario
Sep 14 '13 at 16:02
add a comment |
It's easy: use Pen Drive Linux and Ubuntu to perform a bitwise clone to the new storage device. (Be sure the new storage device is at least as large as the old one.) Disk cloning instructions are here.
Afterwards, if Windows won't boot, you can download the critical chipset drivers and install them from the Windows install media's Recovery Console with DISM. This is more an issue for Windows 7, as Windows 10 is pretty good here. Once Windows is booting, install any remaining drivers and you should be good to go.
answered Feb 10 at 7:09
R.J. DunnillR.J. Dunnill
1015
add a comment |
It's easy: use Pen Drive Linux and Ubuntu to perform a bitwise clone to the new storage device. (Be sure the new storage device is at least as large as the old one.) Disk cloning instructions are here.
Afterwards, if Windows won't boot, you can download the critical chipset drivers and install them from the Windows install media's Recovery Console with DISM. This is more an issue for Windows 7, as Windows 10 is pretty good here. Once Windows is booting, install any remaining drivers and you should be good to go.
answered Feb 10 at 7:09
R.J. DunnillR.J. Dunnill
1015
add a comment |
It's easy: use Pen Drive Linux and Ubuntu to perform a bitwise clone to the new storage device. (Be sure the new storage device is at least as large as the old one.) Disk cloning instructions are here.
Afterwards, if Windows won't boot, you can download the critical chipset drivers and install them from the Windows install media's Recovery Console with DISM. This is more an issue for Windows 7, as Windows 10 is pretty good here. Once Windows is booting, install any remaining drivers and you should be good to go.
answered Feb 10 at 7:09
R.J. DunnillR.J. Dunnill
1015
It's easy: use Pen Drive Linux and Ubuntu to perform a bitwise clone to the new storage device. (Be sure the new storage device is at least as large as the old one.) Disk cloning instructions are here.
Afterwards, if Windows won't boot, you can download the critical chipset drivers and install them from the Windows install media's Recovery Console with DISM. This is more an issue for Windows 7, as Windows 10 is pretty good here. Once Windows is booting, install any remaining drivers and you should be good to go.
answered Feb 10 at 7:09
R.J. DunnillR.J. Dunnill
1015
answered Feb 10 at 7:09
R.J. DunnillR.J. Dunnill
1015
answered Feb 10 at 7:09
R.J. DunnillR.J. Dunnill
1015
answered Feb 10 at 7:09
R.J. DunnillR.J. Dunnill
1015
1015
add a comment |
add a comment |
Use applications like:
Paragon Drive Copy 14 Professional
Features: Upgrade your hard drive to a new one, Migrate to new hardware and more.
FarStone TotalRecovery Pro & Server
Features: Disk Imaging (backs up files, Windows, and partitions) and more.
KLS Backup 2013 Professional
Features: Backup of databases (Microsoft SQL Server, MySQL) and application data (Outlook, Thunderbird) and more.
answered Dec 11 '14 at 14:37
DavidenkoDavidenko
1,14331529
None of these descriptions sound like they'll move an existing installation to a new machine intact. Moving to a new hard drive doesn't count.
– Twisty Impersonator
Jan 5 '18 at 0:49
add a comment |
Use applications like:
Paragon Drive Copy 14 Professional
Features: Upgrade your hard drive to a new one, Migrate to new hardware and more.
FarStone TotalRecovery Pro & Server
Features: Disk Imaging (backs up files, Windows, and partitions) and more.
KLS Backup 2013 Professional
Features: Backup of databases (Microsoft SQL Server, MySQL) and application data (Outlook, Thunderbird) and more.
answered Dec 11 '14 at 14:37
DavidenkoDavidenko
1,14331529
None of these descriptions sound like they'll move an existing installation to a new machine intact. Moving to a new hard drive doesn't count.
– Twisty Impersonator
Jan 5 '18 at 0:49
add a comment |
Use applications like:
Paragon Drive Copy 14 Professional
Features: Upgrade your hard drive to a new one, Migrate to new hardware and more.
FarStone TotalRecovery Pro & Server
Features: Disk Imaging (backs up files, Windows, and partitions) and more.
KLS Backup 2013 Professional
Features: Backup of databases (Microsoft SQL Server, MySQL) and application data (Outlook, Thunderbird) and more.
answered Dec 11 '14 at 14:37
DavidenkoDavidenko
1,14331529
Use applications like:
Paragon Drive Copy 14 Professional
Features: Upgrade your hard drive to a new one, Migrate to new hardware and more.
FarStone TotalRecovery Pro & Server
Features: Disk Imaging (backs up files, Windows, and partitions) and more.
KLS Backup 2013 Professional
Features: Backup of databases (Microsoft SQL Server, MySQL) and application data (Outlook, Thunderbird) and more.
answered Dec 11 '14 at 14:37
DavidenkoDavidenko
1,14331529
answered Dec 11 '14 at 14:37
DavidenkoDavidenko
1,14331529
answered Dec 11 '14 at 14:37
DavidenkoDavidenko
1,14331529
answered Dec 11 '14 at 14:37
DavidenkoDavidenko
1,14331529
1,14331529
None of these descriptions sound like they'll move an existing installation to a new machine intact. Moving to a new hard drive doesn't count.
– Twisty Impersonator
Jan 5 '18 at 0:49
add a comment |
None of these descriptions sound like they'll move an existing installation to a new machine intact. Moving to a new hard drive doesn't count.
– Twisty Impersonator
Jan 5 '18 at 0:49
None of these descriptions sound like they'll move an existing installation to a new machine intact. Moving to a new hard drive doesn't count.
– Twisty Impersonator
Jan 5 '18 at 0:49
None of these descriptions sound like they'll move an existing installation to a new machine intact. Moving to a new hard drive doesn't count.
– Twisty Impersonator
Jan 5 '18 at 0:49
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f644862%2fmove-existing-windows-7-or-10-installation-to-new-computer%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
3
The Windows 7 Back and Restore feature will NOT transfer your applications you would have to reinstall those if you used that option. Acronis True Image and other alternatives has the ability to migrate an image to different hardware. You can do it yourself by putting Windows into a mode, but its not easy, and might simply be worth the small amount of money to do it with speciailized software.
– Ramhound
Sep 13 '13 at 12:33
Is the hardware the same or different? You may have some driver issues if you just try to do a clone from one hard drive to another, though Win 7 is far better than previous OSes at sorting out hardware changes.
– trpt4him
Sep 13 '13 at 12:46
I don't mind the occasional driver issues, as long as my software environments run out of the box. @Ramhound, which software are you specifically suggesting which has better migration capabilities ? Acronis True Image ? Will it move the entire Windows 7 installation, including all installed stuff and files, without causing any boot/incompatiblity problems on destination PC ?
– Ahmad
Sep 13 '13 at 12:50
Also, the hardware is different between the two PCs .. Different motherboard, different CPU (both are Intel though), more RAM, etc ..
– Ahmad
Sep 13 '13 at 12:51
2
@Ahmad -
Acronis True Image 2014 Premiumdoes have the ability to migrate your Windows installation from PC A to PC B where PC B has entirely different hardware. This of course requires two licenses and for you to manually change the license and reactivate the installation. There are other alternatives that do this, in exactly the same way, Acronis does it. Like I said you can place Windows into a migration mode, duplicate the HDD, and Windows would install the required drivers to boot.– Ramhound
Sep 13 '13 at 13:35