GPU fan noisy after cleaning












2















I have a PC with a Radeon 6450 video card. Some days ago I used canned air to clean the computer, I sprayed gently.



When I then tried to start the computer it went fine, up until after some 3 hours of casual internet browsing the GPU fan started to making a loud noise which would not end so I turned off the computer.
Then I started the computer again, the whole thing repeated itself after some 3 hours (not exact) of internet browsing.



Right now I could only use the computer for some 3 hours up until the noise, turn it off for some more hours before I could use it again. If I try to
start the computer right after I turned it off, the sound/(sped up spining?) will be there, I have to wait hours before I can turn it on again. I wonder if this could be related to a overheating issue - That I have to wait before the fan have "gone back" to its regular spin/sound?



What could have happend when I cleaned the computer? I didnt sprayed directly at the fan/making it spin.
Is it a ball-bearing the issue? (does my old video card have ball bearing?) Could dust have entered the ball-bearing and thus making the noise?
Could I somehow (how?) have damaged the video card sensor making the temperature sensor corrupt and therefore making the fan spin fast and loudly.
I dont know if the loud noise come from the fan really spinning abnormally or if the noise come from broken ball-bearings (if, Radeon 6450 have that that is).



Any help or ideas is much appreciated!










share|improve this question


















  • 2





    Not an answer, just another good example of why you should NEVER use compressed air to spray components inside your computer. There is not really such a thing as "gently" when the air is under compression and usually also very cold due to the propellant. With everything turned off and static-grounded, you can sometimes use a vacuum, but a plain wipe and q-tips do a better, safer job if you have serious dust build-up. What possessed you to use the compressed air in the first place? Was the fan already failing?

    – Debra
    Jan 10 at 18:10













  • I hadnt cleaned it for some years and I was dumb enough to clean it - the computer was running more than fine, canned air is recommended by alot of people, I have used it before and it didnt cause this mishap I am in now but perhaps there was something this time causing the canned air to corrupt...something. I would never dare using a vaccum cleaner in the computer and touching with wipes etc I def would not dare. But this is off topic to my quesiton.

    – Alex
    Jan 10 at 21:10













  • Well, the risk with a vacuum (and I don't mean the kind that does your rugs) is static, so everything has to be correctly static-grounded. But an appropriate wipe is fine for dust buildup, as long as it's not the soapy kind that will leave residue. I've used alcohol wipes inside computers for literally ~30 years now with never an issue, and used Q-tips for cleaning fans for nearly that long. But the bottom line is that if everything is fine, leave the dust alone as trying to clean the inside of the case can often cause more harm than good.

    – Debra
    Jan 10 at 23:38











  • BTW, the flip side of my experience with wipes is the number of times (I cringe to think how many) that someone has used compressed air inside a computer case & come to me because they caused damage despite being "careful". However, the fan that's making noise is hopefully replaceable, and I'd suggest avoiding continuing to run the system for a few hours repeatedly, as you may be causing thermal damage or degradation.

    – Debra
    Jan 10 at 23:42











  • Yes I was thinking about replacing the fan but I am not sure I could find a fan to my quite old video card, do you happen to know if there are ball bearings in ati radeon hd 6450, here a picture of the fan: img2.parts-people.com/products/4KHPHa1.JPG

    – Alex
    Jan 11 at 11:11


















2















I have a PC with a Radeon 6450 video card. Some days ago I used canned air to clean the computer, I sprayed gently.



When I then tried to start the computer it went fine, up until after some 3 hours of casual internet browsing the GPU fan started to making a loud noise which would not end so I turned off the computer.
Then I started the computer again, the whole thing repeated itself after some 3 hours (not exact) of internet browsing.



Right now I could only use the computer for some 3 hours up until the noise, turn it off for some more hours before I could use it again. If I try to
start the computer right after I turned it off, the sound/(sped up spining?) will be there, I have to wait hours before I can turn it on again. I wonder if this could be related to a overheating issue - That I have to wait before the fan have "gone back" to its regular spin/sound?



What could have happend when I cleaned the computer? I didnt sprayed directly at the fan/making it spin.
Is it a ball-bearing the issue? (does my old video card have ball bearing?) Could dust have entered the ball-bearing and thus making the noise?
Could I somehow (how?) have damaged the video card sensor making the temperature sensor corrupt and therefore making the fan spin fast and loudly.
I dont know if the loud noise come from the fan really spinning abnormally or if the noise come from broken ball-bearings (if, Radeon 6450 have that that is).



Any help or ideas is much appreciated!










share|improve this question


















  • 2





    Not an answer, just another good example of why you should NEVER use compressed air to spray components inside your computer. There is not really such a thing as "gently" when the air is under compression and usually also very cold due to the propellant. With everything turned off and static-grounded, you can sometimes use a vacuum, but a plain wipe and q-tips do a better, safer job if you have serious dust build-up. What possessed you to use the compressed air in the first place? Was the fan already failing?

    – Debra
    Jan 10 at 18:10













  • I hadnt cleaned it for some years and I was dumb enough to clean it - the computer was running more than fine, canned air is recommended by alot of people, I have used it before and it didnt cause this mishap I am in now but perhaps there was something this time causing the canned air to corrupt...something. I would never dare using a vaccum cleaner in the computer and touching with wipes etc I def would not dare. But this is off topic to my quesiton.

    – Alex
    Jan 10 at 21:10













  • Well, the risk with a vacuum (and I don't mean the kind that does your rugs) is static, so everything has to be correctly static-grounded. But an appropriate wipe is fine for dust buildup, as long as it's not the soapy kind that will leave residue. I've used alcohol wipes inside computers for literally ~30 years now with never an issue, and used Q-tips for cleaning fans for nearly that long. But the bottom line is that if everything is fine, leave the dust alone as trying to clean the inside of the case can often cause more harm than good.

    – Debra
    Jan 10 at 23:38











  • BTW, the flip side of my experience with wipes is the number of times (I cringe to think how many) that someone has used compressed air inside a computer case & come to me because they caused damage despite being "careful". However, the fan that's making noise is hopefully replaceable, and I'd suggest avoiding continuing to run the system for a few hours repeatedly, as you may be causing thermal damage or degradation.

    – Debra
    Jan 10 at 23:42











  • Yes I was thinking about replacing the fan but I am not sure I could find a fan to my quite old video card, do you happen to know if there are ball bearings in ati radeon hd 6450, here a picture of the fan: img2.parts-people.com/products/4KHPHa1.JPG

    – Alex
    Jan 11 at 11:11
















2












2








2








I have a PC with a Radeon 6450 video card. Some days ago I used canned air to clean the computer, I sprayed gently.



When I then tried to start the computer it went fine, up until after some 3 hours of casual internet browsing the GPU fan started to making a loud noise which would not end so I turned off the computer.
Then I started the computer again, the whole thing repeated itself after some 3 hours (not exact) of internet browsing.



Right now I could only use the computer for some 3 hours up until the noise, turn it off for some more hours before I could use it again. If I try to
start the computer right after I turned it off, the sound/(sped up spining?) will be there, I have to wait hours before I can turn it on again. I wonder if this could be related to a overheating issue - That I have to wait before the fan have "gone back" to its regular spin/sound?



What could have happend when I cleaned the computer? I didnt sprayed directly at the fan/making it spin.
Is it a ball-bearing the issue? (does my old video card have ball bearing?) Could dust have entered the ball-bearing and thus making the noise?
Could I somehow (how?) have damaged the video card sensor making the temperature sensor corrupt and therefore making the fan spin fast and loudly.
I dont know if the loud noise come from the fan really spinning abnormally or if the noise come from broken ball-bearings (if, Radeon 6450 have that that is).



Any help or ideas is much appreciated!










share|improve this question














I have a PC with a Radeon 6450 video card. Some days ago I used canned air to clean the computer, I sprayed gently.



When I then tried to start the computer it went fine, up until after some 3 hours of casual internet browsing the GPU fan started to making a loud noise which would not end so I turned off the computer.
Then I started the computer again, the whole thing repeated itself after some 3 hours (not exact) of internet browsing.



Right now I could only use the computer for some 3 hours up until the noise, turn it off for some more hours before I could use it again. If I try to
start the computer right after I turned it off, the sound/(sped up spining?) will be there, I have to wait hours before I can turn it on again. I wonder if this could be related to a overheating issue - That I have to wait before the fan have "gone back" to its regular spin/sound?



What could have happend when I cleaned the computer? I didnt sprayed directly at the fan/making it spin.
Is it a ball-bearing the issue? (does my old video card have ball bearing?) Could dust have entered the ball-bearing and thus making the noise?
Could I somehow (how?) have damaged the video card sensor making the temperature sensor corrupt and therefore making the fan spin fast and loudly.
I dont know if the loud noise come from the fan really spinning abnormally or if the noise come from broken ball-bearings (if, Radeon 6450 have that that is).



Any help or ideas is much appreciated!







graphics-card gpu fan noise cleaning






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Jan 10 at 9:14









AlexAlex

111




111








  • 2





    Not an answer, just another good example of why you should NEVER use compressed air to spray components inside your computer. There is not really such a thing as "gently" when the air is under compression and usually also very cold due to the propellant. With everything turned off and static-grounded, you can sometimes use a vacuum, but a plain wipe and q-tips do a better, safer job if you have serious dust build-up. What possessed you to use the compressed air in the first place? Was the fan already failing?

    – Debra
    Jan 10 at 18:10













  • I hadnt cleaned it for some years and I was dumb enough to clean it - the computer was running more than fine, canned air is recommended by alot of people, I have used it before and it didnt cause this mishap I am in now but perhaps there was something this time causing the canned air to corrupt...something. I would never dare using a vaccum cleaner in the computer and touching with wipes etc I def would not dare. But this is off topic to my quesiton.

    – Alex
    Jan 10 at 21:10













  • Well, the risk with a vacuum (and I don't mean the kind that does your rugs) is static, so everything has to be correctly static-grounded. But an appropriate wipe is fine for dust buildup, as long as it's not the soapy kind that will leave residue. I've used alcohol wipes inside computers for literally ~30 years now with never an issue, and used Q-tips for cleaning fans for nearly that long. But the bottom line is that if everything is fine, leave the dust alone as trying to clean the inside of the case can often cause more harm than good.

    – Debra
    Jan 10 at 23:38











  • BTW, the flip side of my experience with wipes is the number of times (I cringe to think how many) that someone has used compressed air inside a computer case & come to me because they caused damage despite being "careful". However, the fan that's making noise is hopefully replaceable, and I'd suggest avoiding continuing to run the system for a few hours repeatedly, as you may be causing thermal damage or degradation.

    – Debra
    Jan 10 at 23:42











  • Yes I was thinking about replacing the fan but I am not sure I could find a fan to my quite old video card, do you happen to know if there are ball bearings in ati radeon hd 6450, here a picture of the fan: img2.parts-people.com/products/4KHPHa1.JPG

    – Alex
    Jan 11 at 11:11
















  • 2





    Not an answer, just another good example of why you should NEVER use compressed air to spray components inside your computer. There is not really such a thing as "gently" when the air is under compression and usually also very cold due to the propellant. With everything turned off and static-grounded, you can sometimes use a vacuum, but a plain wipe and q-tips do a better, safer job if you have serious dust build-up. What possessed you to use the compressed air in the first place? Was the fan already failing?

    – Debra
    Jan 10 at 18:10













  • I hadnt cleaned it for some years and I was dumb enough to clean it - the computer was running more than fine, canned air is recommended by alot of people, I have used it before and it didnt cause this mishap I am in now but perhaps there was something this time causing the canned air to corrupt...something. I would never dare using a vaccum cleaner in the computer and touching with wipes etc I def would not dare. But this is off topic to my quesiton.

    – Alex
    Jan 10 at 21:10













  • Well, the risk with a vacuum (and I don't mean the kind that does your rugs) is static, so everything has to be correctly static-grounded. But an appropriate wipe is fine for dust buildup, as long as it's not the soapy kind that will leave residue. I've used alcohol wipes inside computers for literally ~30 years now with never an issue, and used Q-tips for cleaning fans for nearly that long. But the bottom line is that if everything is fine, leave the dust alone as trying to clean the inside of the case can often cause more harm than good.

    – Debra
    Jan 10 at 23:38











  • BTW, the flip side of my experience with wipes is the number of times (I cringe to think how many) that someone has used compressed air inside a computer case & come to me because they caused damage despite being "careful". However, the fan that's making noise is hopefully replaceable, and I'd suggest avoiding continuing to run the system for a few hours repeatedly, as you may be causing thermal damage or degradation.

    – Debra
    Jan 10 at 23:42











  • Yes I was thinking about replacing the fan but I am not sure I could find a fan to my quite old video card, do you happen to know if there are ball bearings in ati radeon hd 6450, here a picture of the fan: img2.parts-people.com/products/4KHPHa1.JPG

    – Alex
    Jan 11 at 11:11










2




2





Not an answer, just another good example of why you should NEVER use compressed air to spray components inside your computer. There is not really such a thing as "gently" when the air is under compression and usually also very cold due to the propellant. With everything turned off and static-grounded, you can sometimes use a vacuum, but a plain wipe and q-tips do a better, safer job if you have serious dust build-up. What possessed you to use the compressed air in the first place? Was the fan already failing?

– Debra
Jan 10 at 18:10







Not an answer, just another good example of why you should NEVER use compressed air to spray components inside your computer. There is not really such a thing as "gently" when the air is under compression and usually also very cold due to the propellant. With everything turned off and static-grounded, you can sometimes use a vacuum, but a plain wipe and q-tips do a better, safer job if you have serious dust build-up. What possessed you to use the compressed air in the first place? Was the fan already failing?

– Debra
Jan 10 at 18:10















I hadnt cleaned it for some years and I was dumb enough to clean it - the computer was running more than fine, canned air is recommended by alot of people, I have used it before and it didnt cause this mishap I am in now but perhaps there was something this time causing the canned air to corrupt...something. I would never dare using a vaccum cleaner in the computer and touching with wipes etc I def would not dare. But this is off topic to my quesiton.

– Alex
Jan 10 at 21:10







I hadnt cleaned it for some years and I was dumb enough to clean it - the computer was running more than fine, canned air is recommended by alot of people, I have used it before and it didnt cause this mishap I am in now but perhaps there was something this time causing the canned air to corrupt...something. I would never dare using a vaccum cleaner in the computer and touching with wipes etc I def would not dare. But this is off topic to my quesiton.

– Alex
Jan 10 at 21:10















Well, the risk with a vacuum (and I don't mean the kind that does your rugs) is static, so everything has to be correctly static-grounded. But an appropriate wipe is fine for dust buildup, as long as it's not the soapy kind that will leave residue. I've used alcohol wipes inside computers for literally ~30 years now with never an issue, and used Q-tips for cleaning fans for nearly that long. But the bottom line is that if everything is fine, leave the dust alone as trying to clean the inside of the case can often cause more harm than good.

– Debra
Jan 10 at 23:38





Well, the risk with a vacuum (and I don't mean the kind that does your rugs) is static, so everything has to be correctly static-grounded. But an appropriate wipe is fine for dust buildup, as long as it's not the soapy kind that will leave residue. I've used alcohol wipes inside computers for literally ~30 years now with never an issue, and used Q-tips for cleaning fans for nearly that long. But the bottom line is that if everything is fine, leave the dust alone as trying to clean the inside of the case can often cause more harm than good.

– Debra
Jan 10 at 23:38













BTW, the flip side of my experience with wipes is the number of times (I cringe to think how many) that someone has used compressed air inside a computer case & come to me because they caused damage despite being "careful". However, the fan that's making noise is hopefully replaceable, and I'd suggest avoiding continuing to run the system for a few hours repeatedly, as you may be causing thermal damage or degradation.

– Debra
Jan 10 at 23:42





BTW, the flip side of my experience with wipes is the number of times (I cringe to think how many) that someone has used compressed air inside a computer case & come to me because they caused damage despite being "careful". However, the fan that's making noise is hopefully replaceable, and I'd suggest avoiding continuing to run the system for a few hours repeatedly, as you may be causing thermal damage or degradation.

– Debra
Jan 10 at 23:42













Yes I was thinking about replacing the fan but I am not sure I could find a fan to my quite old video card, do you happen to know if there are ball bearings in ati radeon hd 6450, here a picture of the fan: img2.parts-people.com/products/4KHPHa1.JPG

– Alex
Jan 11 at 11:11







Yes I was thinking about replacing the fan but I am not sure I could find a fan to my quite old video card, do you happen to know if there are ball bearings in ati radeon hd 6450, here a picture of the fan: img2.parts-people.com/products/4KHPHa1.JPG

– Alex
Jan 11 at 11:11












0






active

oldest

votes











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1392669%2fgpu-fan-noisy-after-cleaning%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























0






active

oldest

votes








0






active

oldest

votes









active

oldest

votes






active

oldest

votes
















draft saved

draft discarded




















































Thanks for contributing an answer to Super User!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1392669%2fgpu-fan-noisy-after-cleaning%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

How to make a Squid Proxy server?

Is this a new Fibonacci Identity?

19世紀