How to find which IP addresses are connected to an access point?
Is their a way to find out what IP addresses or full resolved computer names are connected to a specific Access Point on a network?
Edit:
The APs are generic netgear routers running in AP mode with stock firmware.
wireless-access-point
asked Sep 17 '13 at 6:43
Anshu PrateekAnshu Prateek
173210
add a comment |
Is their a way to find out what IP addresses or full resolved computer names are connected to a specific Access Point on a network?
Edit:
The APs are generic netgear routers running in AP mode with stock firmware.
wireless-access-point
asked Sep 17 '13 at 6:43
Anshu PrateekAnshu Prateek
173210
What's the access point in question here? And are you using the stock firmware for it?
– happy_soil
Sep 17 '13 at 8:09
add a comment |
Is their a way to find out what IP addresses or full resolved computer names are connected to a specific Access Point on a network?
Edit:
The APs are generic netgear routers running in AP mode with stock firmware.
wireless-access-point
asked Sep 17 '13 at 6:43
Anshu PrateekAnshu Prateek
173210
Is their a way to find out what IP addresses or full resolved computer names are connected to a specific Access Point on a network?
Edit:
The APs are generic netgear routers running in AP mode with stock firmware.
wireless-access-point
wireless-access-point
asked Sep 17 '13 at 6:43
Anshu PrateekAnshu Prateek
173210
asked Sep 17 '13 at 6:43
Anshu PrateekAnshu Prateek
173210
edited Sep 17 '13 at 18:51
Anshu Prateek
asked Sep 17 '13 at 6:43
Anshu PrateekAnshu Prateek
173210
asked Sep 17 '13 at 6:43
Anshu PrateekAnshu Prateek
173210
asked Sep 17 '13 at 6:43
Anshu PrateekAnshu Prateek
173210
173210
What's the access point in question here? And are you using the stock firmware for it?
– happy_soil
Sep 17 '13 at 8:09
add a comment |
What's the access point in question here? And are you using the stock firmware for it?
– happy_soil
Sep 17 '13 at 8:09
What's the access point in question here? And are you using the stock firmware for it?
– happy_soil
Sep 17 '13 at 8:09
What's the access point in question here? And are you using the stock firmware for it?
– happy_soil
Sep 17 '13 at 8:09
add a comment |
2 Answers
2
active
oldest
votes
If you are connected to the network:
Try Advanced IP Scanner. (Only used it once, long ago, use at own risk).
If you are not connected to the network:
I must say, I don't know how to get an IP from a mac address if you are not connected to the same network, but you can find the mac addresses of devices connected to a wireless access point by using airodump-ng from linux.
Below is an example airodump-ng output adapted from http://www.aircrack-ng.org/doku.php?id=airodump-ng
CH 9 ][ Elapsed: 1 min ][ 2007-04-26 17:41 ][ WPA handshake: 00:14:6C:7E:40:80
BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:09:5B:1C:AA:1D 11 16 10 0 0 11 54. OPN NETGEAR
00:14:6C:7A:41:81 34 100 57 14 1 9 11e WEP WEP bigbear
00:14:6C:7E:40:80 32 100 752 73 2 9 54 WPA TKIP PSK teddy
BSSID STATION PWR Rate Lost Packets Probes
00:14:6C:7A:41:81 00:0F:B5:32:31:31 51 36-24 2 14
(not associated) 00:14:A4:3F:8D:13 19 0-0 0 4 mossy
00:14:6C:7A:41:81 00:0C:41:52:D1:D1 -1 36-36 0 5
00:14:6C:7E:40:80 00:0F:B5:FD:FB:C2 35 54-54 0 99 teddy
The top part shows all Access Points. Bottom part 2nd column shows devices connected to Bottom part 1st column Access Point. You can see two devices connected to 00:14:6C:7A:41:81 (bigbear).
Hope it helps.
answered Sep 17 '13 at 13:20
sirwoetangsirwoetang
586
Remember to comment
– sirwoetang
Sep 29 '13 at 13:41
add a comment |
- What make / type AP are you referring too?
- It is possible, on either the terminal or the GUI interface (normally the default gateway address in your browser) navigate to the dhcp server. You will be able to see the IP, hostname, MAC and time before the lease is going to be renewed. Ideally the ARP protocol would answer you question, as in Cisco we find it extremely useful to view connected devices. I know in Windows command prompt I've used the arp -a command to trace devices on the network route.
answered Sep 17 '13 at 13:24
RudolphRudolph
1,94522030
arp -a or the GUI would give me devices connected to the network, not just to the AP, right?
– Anshu Prateek
Sep 17 '13 at 18:53
Yes, it would provide the devices' names connected to the network. If you are not too computer literate, I would suggest trying the GUI, which would be the default gateway address entered into your browser.
– Rudolph
Sep 18 '13 at 6:10
mmm, I need the device list connected only to the AP and not the network. Thge GUI on the router/gateway will show me everything connected to it. It doesn't show if the devices are connected through a particular AP.
– Anshu Prateek
Sep 21 '13 at 7:01
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f646387%2fhow-to-find-which-ip-addresses-are-connected-to-an-access-point%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
If you are connected to the network:
Try Advanced IP Scanner. (Only used it once, long ago, use at own risk).
If you are not connected to the network:
I must say, I don't know how to get an IP from a mac address if you are not connected to the same network, but you can find the mac addresses of devices connected to a wireless access point by using airodump-ng from linux.
Below is an example airodump-ng output adapted from http://www.aircrack-ng.org/doku.php?id=airodump-ng
CH 9 ][ Elapsed: 1 min ][ 2007-04-26 17:41 ][ WPA handshake: 00:14:6C:7E:40:80
BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:09:5B:1C:AA:1D 11 16 10 0 0 11 54. OPN NETGEAR
00:14:6C:7A:41:81 34 100 57 14 1 9 11e WEP WEP bigbear
00:14:6C:7E:40:80 32 100 752 73 2 9 54 WPA TKIP PSK teddy
BSSID STATION PWR Rate Lost Packets Probes
00:14:6C:7A:41:81 00:0F:B5:32:31:31 51 36-24 2 14
(not associated) 00:14:A4:3F:8D:13 19 0-0 0 4 mossy
00:14:6C:7A:41:81 00:0C:41:52:D1:D1 -1 36-36 0 5
00:14:6C:7E:40:80 00:0F:B5:FD:FB:C2 35 54-54 0 99 teddy
The top part shows all Access Points. Bottom part 2nd column shows devices connected to Bottom part 1st column Access Point. You can see two devices connected to 00:14:6C:7A:41:81 (bigbear).
Hope it helps.
answered Sep 17 '13 at 13:20
sirwoetangsirwoetang
586
Remember to comment
– sirwoetang
Sep 29 '13 at 13:41
add a comment |
If you are connected to the network:
Try Advanced IP Scanner. (Only used it once, long ago, use at own risk).
If you are not connected to the network:
I must say, I don't know how to get an IP from a mac address if you are not connected to the same network, but you can find the mac addresses of devices connected to a wireless access point by using airodump-ng from linux.
Below is an example airodump-ng output adapted from http://www.aircrack-ng.org/doku.php?id=airodump-ng
CH 9 ][ Elapsed: 1 min ][ 2007-04-26 17:41 ][ WPA handshake: 00:14:6C:7E:40:80
BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:09:5B:1C:AA:1D 11 16 10 0 0 11 54. OPN NETGEAR
00:14:6C:7A:41:81 34 100 57 14 1 9 11e WEP WEP bigbear
00:14:6C:7E:40:80 32 100 752 73 2 9 54 WPA TKIP PSK teddy
BSSID STATION PWR Rate Lost Packets Probes
00:14:6C:7A:41:81 00:0F:B5:32:31:31 51 36-24 2 14
(not associated) 00:14:A4:3F:8D:13 19 0-0 0 4 mossy
00:14:6C:7A:41:81 00:0C:41:52:D1:D1 -1 36-36 0 5
00:14:6C:7E:40:80 00:0F:B5:FD:FB:C2 35 54-54 0 99 teddy
The top part shows all Access Points. Bottom part 2nd column shows devices connected to Bottom part 1st column Access Point. You can see two devices connected to 00:14:6C:7A:41:81 (bigbear).
Hope it helps.
answered Sep 17 '13 at 13:20
sirwoetangsirwoetang
586
Remember to comment
– sirwoetang
Sep 29 '13 at 13:41
add a comment |
If you are connected to the network:
Try Advanced IP Scanner. (Only used it once, long ago, use at own risk).
If you are not connected to the network:
I must say, I don't know how to get an IP from a mac address if you are not connected to the same network, but you can find the mac addresses of devices connected to a wireless access point by using airodump-ng from linux.
Below is an example airodump-ng output adapted from http://www.aircrack-ng.org/doku.php?id=airodump-ng
CH 9 ][ Elapsed: 1 min ][ 2007-04-26 17:41 ][ WPA handshake: 00:14:6C:7E:40:80
BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:09:5B:1C:AA:1D 11 16 10 0 0 11 54. OPN NETGEAR
00:14:6C:7A:41:81 34 100 57 14 1 9 11e WEP WEP bigbear
00:14:6C:7E:40:80 32 100 752 73 2 9 54 WPA TKIP PSK teddy
BSSID STATION PWR Rate Lost Packets Probes
00:14:6C:7A:41:81 00:0F:B5:32:31:31 51 36-24 2 14
(not associated) 00:14:A4:3F:8D:13 19 0-0 0 4 mossy
00:14:6C:7A:41:81 00:0C:41:52:D1:D1 -1 36-36 0 5
00:14:6C:7E:40:80 00:0F:B5:FD:FB:C2 35 54-54 0 99 teddy
The top part shows all Access Points. Bottom part 2nd column shows devices connected to Bottom part 1st column Access Point. You can see two devices connected to 00:14:6C:7A:41:81 (bigbear).
Hope it helps.
answered Sep 17 '13 at 13:20
sirwoetangsirwoetang
586
If you are connected to the network:
Try Advanced IP Scanner. (Only used it once, long ago, use at own risk).
If you are not connected to the network:
I must say, I don't know how to get an IP from a mac address if you are not connected to the same network, but you can find the mac addresses of devices connected to a wireless access point by using airodump-ng from linux.
Below is an example airodump-ng output adapted from http://www.aircrack-ng.org/doku.php?id=airodump-ng
CH 9 ][ Elapsed: 1 min ][ 2007-04-26 17:41 ][ WPA handshake: 00:14:6C:7E:40:80
BSSID PWR RXQ Beacons #Data, #/s CH MB ENC CIPHER AUTH ESSID
00:09:5B:1C:AA:1D 11 16 10 0 0 11 54. OPN NETGEAR
00:14:6C:7A:41:81 34 100 57 14 1 9 11e WEP WEP bigbear
00:14:6C:7E:40:80 32 100 752 73 2 9 54 WPA TKIP PSK teddy
BSSID STATION PWR Rate Lost Packets Probes
00:14:6C:7A:41:81 00:0F:B5:32:31:31 51 36-24 2 14
(not associated) 00:14:A4:3F:8D:13 19 0-0 0 4 mossy
00:14:6C:7A:41:81 00:0C:41:52:D1:D1 -1 36-36 0 5
00:14:6C:7E:40:80 00:0F:B5:FD:FB:C2 35 54-54 0 99 teddy
The top part shows all Access Points. Bottom part 2nd column shows devices connected to Bottom part 1st column Access Point. You can see two devices connected to 00:14:6C:7A:41:81 (bigbear).
Hope it helps.
answered Sep 17 '13 at 13:20
sirwoetangsirwoetang
586
edited Sep 17 '13 at 13:32
answered Sep 17 '13 at 13:20
sirwoetangsirwoetang
586
answered Sep 17 '13 at 13:20
sirwoetangsirwoetang
586
answered Sep 17 '13 at 13:20
sirwoetangsirwoetang
586
586
Remember to comment
– sirwoetang
Sep 29 '13 at 13:41
add a comment |
Remember to comment
– sirwoetang
Sep 29 '13 at 13:41
Remember to comment
– sirwoetang
Sep 29 '13 at 13:41
Remember to comment
– sirwoetang
Sep 29 '13 at 13:41
add a comment |
- What make / type AP are you referring too?
- It is possible, on either the terminal or the GUI interface (normally the default gateway address in your browser) navigate to the dhcp server. You will be able to see the IP, hostname, MAC and time before the lease is going to be renewed. Ideally the ARP protocol would answer you question, as in Cisco we find it extremely useful to view connected devices. I know in Windows command prompt I've used the arp -a command to trace devices on the network route.
answered Sep 17 '13 at 13:24
RudolphRudolph
1,94522030
arp -a or the GUI would give me devices connected to the network, not just to the AP, right?
– Anshu Prateek
Sep 17 '13 at 18:53
Yes, it would provide the devices' names connected to the network. If you are not too computer literate, I would suggest trying the GUI, which would be the default gateway address entered into your browser.
– Rudolph
Sep 18 '13 at 6:10
mmm, I need the device list connected only to the AP and not the network. Thge GUI on the router/gateway will show me everything connected to it. It doesn't show if the devices are connected through a particular AP.
– Anshu Prateek
Sep 21 '13 at 7:01
add a comment |
- What make / type AP are you referring too?
- It is possible, on either the terminal or the GUI interface (normally the default gateway address in your browser) navigate to the dhcp server. You will be able to see the IP, hostname, MAC and time before the lease is going to be renewed. Ideally the ARP protocol would answer you question, as in Cisco we find it extremely useful to view connected devices. I know in Windows command prompt I've used the arp -a command to trace devices on the network route.
answered Sep 17 '13 at 13:24
RudolphRudolph
1,94522030
arp -a or the GUI would give me devices connected to the network, not just to the AP, right?
– Anshu Prateek
Sep 17 '13 at 18:53
Yes, it would provide the devices' names connected to the network. If you are not too computer literate, I would suggest trying the GUI, which would be the default gateway address entered into your browser.
– Rudolph
Sep 18 '13 at 6:10
mmm, I need the device list connected only to the AP and not the network. Thge GUI on the router/gateway will show me everything connected to it. It doesn't show if the devices are connected through a particular AP.
– Anshu Prateek
Sep 21 '13 at 7:01
add a comment |
- What make / type AP are you referring too?
- It is possible, on either the terminal or the GUI interface (normally the default gateway address in your browser) navigate to the dhcp server. You will be able to see the IP, hostname, MAC and time before the lease is going to be renewed. Ideally the ARP protocol would answer you question, as in Cisco we find it extremely useful to view connected devices. I know in Windows command prompt I've used the arp -a command to trace devices on the network route.
answered Sep 17 '13 at 13:24
RudolphRudolph
1,94522030
- What make / type AP are you referring too?
- It is possible, on either the terminal or the GUI interface (normally the default gateway address in your browser) navigate to the dhcp server. You will be able to see the IP, hostname, MAC and time before the lease is going to be renewed. Ideally the ARP protocol would answer you question, as in Cisco we find it extremely useful to view connected devices. I know in Windows command prompt I've used the arp -a command to trace devices on the network route.
answered Sep 17 '13 at 13:24
RudolphRudolph
1,94522030
edited Sep 17 '13 at 13:36
answered Sep 17 '13 at 13:24
RudolphRudolph
1,94522030
answered Sep 17 '13 at 13:24
RudolphRudolph
1,94522030
answered Sep 17 '13 at 13:24
RudolphRudolph
1,94522030
1,94522030
arp -a or the GUI would give me devices connected to the network, not just to the AP, right?
– Anshu Prateek
Sep 17 '13 at 18:53
Yes, it would provide the devices' names connected to the network. If you are not too computer literate, I would suggest trying the GUI, which would be the default gateway address entered into your browser.
– Rudolph
Sep 18 '13 at 6:10
mmm, I need the device list connected only to the AP and not the network. Thge GUI on the router/gateway will show me everything connected to it. It doesn't show if the devices are connected through a particular AP.
– Anshu Prateek
Sep 21 '13 at 7:01
add a comment |
arp -a or the GUI would give me devices connected to the network, not just to the AP, right?
– Anshu Prateek
Sep 17 '13 at 18:53
Yes, it would provide the devices' names connected to the network. If you are not too computer literate, I would suggest trying the GUI, which would be the default gateway address entered into your browser.
– Rudolph
Sep 18 '13 at 6:10
mmm, I need the device list connected only to the AP and not the network. Thge GUI on the router/gateway will show me everything connected to it. It doesn't show if the devices are connected through a particular AP.
– Anshu Prateek
Sep 21 '13 at 7:01
arp -a or the GUI would give me devices connected to the network, not just to the AP, right?
– Anshu Prateek
Sep 17 '13 at 18:53
arp -a or the GUI would give me devices connected to the network, not just to the AP, right?
– Anshu Prateek
Sep 17 '13 at 18:53
Yes, it would provide the devices' names connected to the network. If you are not too computer literate, I would suggest trying the GUI, which would be the default gateway address entered into your browser.
– Rudolph
Sep 18 '13 at 6:10
Yes, it would provide the devices' names connected to the network. If you are not too computer literate, I would suggest trying the GUI, which would be the default gateway address entered into your browser.
– Rudolph
Sep 18 '13 at 6:10
mmm, I need the device list connected only to the AP and not the network. Thge GUI on the router/gateway will show me everything connected to it. It doesn't show if the devices are connected through a particular AP.
– Anshu Prateek
Sep 21 '13 at 7:01
mmm, I need the device list connected only to the AP and not the network. Thge GUI on the router/gateway will show me everything connected to it. It doesn't show if the devices are connected through a particular AP.
– Anshu Prateek
Sep 21 '13 at 7:01
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f646387%2fhow-to-find-which-ip-addresses-are-connected-to-an-access-point%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
What's the access point in question here? And are you using the stock firmware for it?
– happy_soil
Sep 17 '13 at 8:09