Ytdyklly

My laptop fan is working annoyingly. It spins for 5 seconds and then stops for 2 seconds and then spins and then stops repeatedly. It always annoys me. I use sensors package to check when this happened. I realize when cpu temperature is low for example 50 to 55 degree it happens. I mean when cpu is working on a heavy process, then fan is working without stopping. There is no overheating issue at all. So you got the problem.

In the bois, there is only "fan always works" with yes or no options for fan control. There is no other option or information about the fan in the bois. Changing the option to yes or no has no effect on my problem.

Here is the output of sensors-detect

# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)

# System: Hewlett-Packard HP Pavilion g6 Notebook PC [0696120000204210000610100] (laptop)

# Board: Hewlett-Packard 1670

# Kernel: 4.15.0-43-generic x86_64

# Processor: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (6/42/7)



This program will help you determine which kernel modules you need

to load to use lm_sensors most effectively. It is generally safe

and recommended to accept the default answers to all questions,

unless you know what you're doing.



Some south bridges, CPUs or memory controllers contain embedded sensors.

Do you want to scan for them? This is totally safe. (YES/no): y

Module cpuid loaded successfully.

Silicon Integrated Systems SIS5595...                       No

VIA VT82C686 Integrated Sensors...                          No

VIA VT8231 Integrated Sensors...                            No

AMD K8 thermal sensors...                                   No

AMD Family 10h thermal sensors...                           No

AMD Family 11h thermal sensors...                           No

AMD Family 12h and 14h thermal sensors...                   No

AMD Family 15h thermal sensors...                           No

AMD Family 16h thermal sensors...                           No

AMD Family 15h power sensors...                             No

AMD Family 16h power sensors...                             No

Intel digital thermal sensor...                             Success!

    (driver `coretemp')

Intel AMB FB-DIMM thermal sensor...                         No

Intel 5500/5520/X58 thermal sensor...                       No

VIA C7 thermal sensor...                                    No

VIA Nano thermal sensor...                                  No



Some Super I/O chips contain embedded sensors. We have to write to

standard I/O ports to probe them. This is usually safe.

Do you want to scan for Super I/O sensors? (YES/no): y

Probing for Super-I/O at 0x2e/0x2f

Trying family `National Semiconductor/ITE'...               No

Trying family `SMSC'...                                     No

Trying family `VIA/Winbond/Nuvoton/Fintek'...               No

Trying family `ITE'...                                      No

Probing for Super-I/O at 0x4e/0x4f

Trying family `National Semiconductor/ITE'...               No

Trying family `SMSC'...                                     No

Trying family `VIA/Winbond/Nuvoton/Fintek'...               No

Trying family `ITE'...                                      No



Some hardware monitoring chips are accessible through the ISA I/O ports.

We have to write to arbitrary I/O ports to probe them. This is usually

safe though. Yes, you do have ISA I/O ports even if you do not have any

ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y

Probing for `National Semiconductor LM78' at 0x290...       No

Probing for `National Semiconductor LM79' at 0x290...       No

Probing for `Winbond W83781D' at 0x290...                   No

Probing for `Winbond W83782D' at 0x290...                   No



Lastly, we can probe the I2C/SMBus adapters for connected hardware

monitoring devices. This is the most risky part, and while it works

reasonably well on most systems, it has been reported to cause trouble

on some systems.

Do you want to probe the I2C/SMBus adapters now? (YES/no): y

Using driver `i2c-i801' for device 0000:00:1f.3: Intel Cougar Point (PCH)



Next adapter: SMBus I801 adapter at 4040 (i2c-0)

Do you want to scan it? (YES/no/selectively): y

Client found at address 0x50

Handled by driver `eeprom' (already loaded), chip type `eeprom'

    (note: this is probably NOT a sensor chip!)

Client found at address 0x52

Handled by driver `eeprom' (already loaded), chip type `eeprom'

    (note: this is probably NOT a sensor chip!)



Next adapter: i915 gmbus ssc (i2c-1)

Do you want to scan it? (yes/NO/selectively): y



Next adapter: i915 gmbus vga (i2c-2)

Do you want to scan it? (yes/NO/selectively): y



Next adapter: i915 gmbus panel (i2c-3)

Do you want to scan it? (yes/NO/selectively): y

Client found at address 0x28

Probing for `National Semiconductor LM78'...                No

Probing for `National Semiconductor LM79'...                No

Probing for `National Semiconductor LM80'...                No

Probing for `National Semiconductor LM96080'...             No

Probing for `Winbond W83781D'...                            No

Probing for `Winbond W83782D'...                            No

Probing for `Nuvoton NCT7802Y'...                           No

Probing for `Winbond W83627HF'...                           No

Probing for `Winbond W83627EHF'...                          No

Probing for `Winbond W83627DHG/W83667HG/W83677HG'...        No

Probing for `Asus AS99127F (rev.1)'...                      No

Probing for `Asus AS99127F (rev.2)'...                      No

Probing for `Asus ASB100 Bach'...                           No

Probing for `Analog Devices ADM1029'...                     No

Probing for `ITE IT8712F'...                                No



Next adapter: i915 gmbus dpc (i2c-4)

Do you want to scan it? (yes/NO/selectively): y



Next adapter: i915 gmbus dpb (i2c-5)

Do you want to scan it? (yes/NO/selectively): y



Next adapter: i915 gmbus dpd (i2c-6)

Do you want to scan it? (yes/NO/selectively): y



Next adapter: DPDDC-B (i2c-7)

Do you want to scan it? (yes/NO/selectively): y





Now follows a summary of the probes I have just done.

Just press ENTER to continue: y



Driver `coretemp':

  * Chip `Intel digital thermal sensor' (confidence: 9)



To load everything that is needed, add this to /etc/modules:

#----cut here----

# Chip drivers

coretemp

#----cut here----

If you have some drivers built into your kernel, the list above will

contain too many modules. Skip the appropriate ones!



Do you want to add these lines automatically to /etc/modules? (yes/NO)y

Successful!



Monitoring programs won't work until the needed modules are

loaded. You may want to run '/etc/init.d/kmod start'

to load them.



Unloading cpuid... OK

So friends, what is your suggestion to solve the issue?