No motherboard splash screen, and cannot boot into UEFI
I have a PC with the following specs:
- Asus ROG Strix B350-F Gaming Motherboard
- Ryzen 5 2600
- 8GB DDR4 RAM
- Zotac GTX 1060 6GB AMP! Edition
The problem is that I very rarely get the motherboard splash screen, and the PC goes directly to Windows after turning on. In Windows everything works normally.
Whenever I press DEL or F2 to access the UEFI, the monitor just stays on a black screen, and I'm left with no choice but to turn the computer off by holding down the power button. This problem also persists when trying to access the UEFI by doing a Shift+Restart in Windows 10.
Very rarely under unknown circumstances, I do get the splash screen, at which point I can press DEL or F2 to access the UEFI.
I strongly suspect that the UEFI is in fact booting when I press DEL or F2, but for some reason, the graphics card is not outputting any video when on the splash screen or in the UEFI. It only starts working after booting into Windows 10. In Windows it works fine.
I've tried the other DisplayPort ports on the GPU, and also the port on the motherboard itself, but no dice.
Did I correctly identify the issue, and how do I fix it?
windows-10 boot motherboard bios uefi
asked 21 hours ago
Vikram
1289
add a comment |
I have a PC with the following specs:
- Asus ROG Strix B350-F Gaming Motherboard
- Ryzen 5 2600
- 8GB DDR4 RAM
- Zotac GTX 1060 6GB AMP! Edition
The problem is that I very rarely get the motherboard splash screen, and the PC goes directly to Windows after turning on. In Windows everything works normally.
Whenever I press DEL or F2 to access the UEFI, the monitor just stays on a black screen, and I'm left with no choice but to turn the computer off by holding down the power button. This problem also persists when trying to access the UEFI by doing a Shift+Restart in Windows 10.
Very rarely under unknown circumstances, I do get the splash screen, at which point I can press DEL or F2 to access the UEFI.
I strongly suspect that the UEFI is in fact booting when I press DEL or F2, but for some reason, the graphics card is not outputting any video when on the splash screen or in the UEFI. It only starts working after booting into Windows 10. In Windows it works fine.
I've tried the other DisplayPort ports on the GPU, and also the port on the motherboard itself, but no dice.
Did I correctly identify the issue, and how do I fix it?
windows-10 boot motherboard bios uefi
asked 21 hours ago
Vikram
1289
add a comment |
I have a PC with the following specs:
- Asus ROG Strix B350-F Gaming Motherboard
- Ryzen 5 2600
- 8GB DDR4 RAM
- Zotac GTX 1060 6GB AMP! Edition
The problem is that I very rarely get the motherboard splash screen, and the PC goes directly to Windows after turning on. In Windows everything works normally.
Whenever I press DEL or F2 to access the UEFI, the monitor just stays on a black screen, and I'm left with no choice but to turn the computer off by holding down the power button. This problem also persists when trying to access the UEFI by doing a Shift+Restart in Windows 10.
Very rarely under unknown circumstances, I do get the splash screen, at which point I can press DEL or F2 to access the UEFI.
I strongly suspect that the UEFI is in fact booting when I press DEL or F2, but for some reason, the graphics card is not outputting any video when on the splash screen or in the UEFI. It only starts working after booting into Windows 10. In Windows it works fine.
I've tried the other DisplayPort ports on the GPU, and also the port on the motherboard itself, but no dice.
Did I correctly identify the issue, and how do I fix it?
windows-10 boot motherboard bios uefi
asked 21 hours ago
Vikram
1289
I have a PC with the following specs:
- Asus ROG Strix B350-F Gaming Motherboard
- Ryzen 5 2600
- 8GB DDR4 RAM
- Zotac GTX 1060 6GB AMP! Edition
The problem is that I very rarely get the motherboard splash screen, and the PC goes directly to Windows after turning on. In Windows everything works normally.
Whenever I press DEL or F2 to access the UEFI, the monitor just stays on a black screen, and I'm left with no choice but to turn the computer off by holding down the power button. This problem also persists when trying to access the UEFI by doing a Shift+Restart in Windows 10.
Very rarely under unknown circumstances, I do get the splash screen, at which point I can press DEL or F2 to access the UEFI.
I strongly suspect that the UEFI is in fact booting when I press DEL or F2, but for some reason, the graphics card is not outputting any video when on the splash screen or in the UEFI. It only starts working after booting into Windows 10. In Windows it works fine.
I've tried the other DisplayPort ports on the GPU, and also the port on the motherboard itself, but no dice.
Did I correctly identify the issue, and how do I fix it?
windows-10 boot motherboard bios uefi
windows-10 boot motherboard bios uefi
asked 21 hours ago
Vikram
1289
asked 21 hours ago
Vikram
1289
asked 21 hours ago
Vikram
1289
asked 21 hours ago
Vikram
1289
asked 21 hours ago
Vikram
1289
1289
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
Did you try resetting the CMOS RAM (using the jumper as stated in the motherboard manual)? This has saved me sometimes with BIOS and booting troubles.
answered 21 hours ago
mmeisner
11
New contributor
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Do you get the same result if you disable the graphics card and use the onboard/integrated graphics? If your Asus mother board is similar to my Prime Z270, you can remove the motherboard battery, short your jumpers* to reset CMOS and your will be forced to enter the BIOS on the next boot, where you can then check your UEFI settings and also increase the time to alter boot options.
*Remove the power prior to jumping the shorting pins
answered 20 hours ago
dwmabe2000
115
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1390409%2fno-motherboard-splash-screen-and-cannot-boot-into-uefi%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Did you try resetting the CMOS RAM (using the jumper as stated in the motherboard manual)? This has saved me sometimes with BIOS and booting troubles.
answered 21 hours ago
mmeisner
11
New contributor
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Did you try resetting the CMOS RAM (using the jumper as stated in the motherboard manual)? This has saved me sometimes with BIOS and booting troubles.
answered 21 hours ago
mmeisner
11
New contributor
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
Did you try resetting the CMOS RAM (using the jumper as stated in the motherboard manual)? This has saved me sometimes with BIOS and booting troubles.
answered 21 hours ago
mmeisner
11
New contributor
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Did you try resetting the CMOS RAM (using the jumper as stated in the motherboard manual)? This has saved me sometimes with BIOS and booting troubles.
answered 21 hours ago
mmeisner
11
New contributor
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 21 hours ago
mmeisner
11
New contributor
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
answered 21 hours ago
mmeisner
11
answered 21 hours ago
mmeisner
11
11
New contributor
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
mmeisner is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
add a comment |
Do you get the same result if you disable the graphics card and use the onboard/integrated graphics? If your Asus mother board is similar to my Prime Z270, you can remove the motherboard battery, short your jumpers* to reset CMOS and your will be forced to enter the BIOS on the next boot, where you can then check your UEFI settings and also increase the time to alter boot options.
*Remove the power prior to jumping the shorting pins
answered 20 hours ago
dwmabe2000
115
add a comment |
Do you get the same result if you disable the graphics card and use the onboard/integrated graphics? If your Asus mother board is similar to my Prime Z270, you can remove the motherboard battery, short your jumpers* to reset CMOS and your will be forced to enter the BIOS on the next boot, where you can then check your UEFI settings and also increase the time to alter boot options.
*Remove the power prior to jumping the shorting pins
answered 20 hours ago
dwmabe2000
115
add a comment |
Do you get the same result if you disable the graphics card and use the onboard/integrated graphics? If your Asus mother board is similar to my Prime Z270, you can remove the motherboard battery, short your jumpers* to reset CMOS and your will be forced to enter the BIOS on the next boot, where you can then check your UEFI settings and also increase the time to alter boot options.
*Remove the power prior to jumping the shorting pins
answered 20 hours ago
dwmabe2000
115
Do you get the same result if you disable the graphics card and use the onboard/integrated graphics? If your Asus mother board is similar to my Prime Z270, you can remove the motherboard battery, short your jumpers* to reset CMOS and your will be forced to enter the BIOS on the next boot, where you can then check your UEFI settings and also increase the time to alter boot options.
*Remove the power prior to jumping the shorting pins
answered 20 hours ago
dwmabe2000
115
answered 20 hours ago
dwmabe2000
115
answered 20 hours ago
dwmabe2000
115
answered 20 hours ago
dwmabe2000
115
115
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1390409%2fno-motherboard-splash-screen-and-cannot-boot-into-uefi%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
