Laptop “thinks” it's overheating, shuts down itself
Short version: When I turn on the laptop fans go full speed even though the the laptop is ice cold. After about 20 seconds it shuts down itself which I guess it's "thinking" CPU is overheating.
Long version: Recently I had an overheating issue with it, I thought open it up and clean the fan. I knew the problem was with the fan because I did not do any heavy tasks with this laptop which would need a lot of resources to compute and the fan didn't seem to push any air out from the air vents.
Now this is not my first time opening my laptop so it wasn't hard, I follow the disassembly video just to make sure I would not forget anything. I open it open clear the dusts stuck in the fan which was a lot. The vents were completely clear. I assembled the laptop again, turned it on, it was on for a couple of minutes and then it shuts down. The problem seemed to be the battery since it only lasts for 5 minutes. I connected the charger and turned it on again. In the middle of boot up it shuts down. The strange thing is fans are working full speed the whole time even though it's cold.
I am pretty sure I have connected everything. But of course there's something I have missed which causes this problem. I did not disassemble the heatsink from CPU. I only opened the fan.
What could be the problem
cpu shutdown fan cooling
|
show 1 more comment
Short version: When I turn on the laptop fans go full speed even though the the laptop is ice cold. After about 20 seconds it shuts down itself which I guess it's "thinking" CPU is overheating.
Long version: Recently I had an overheating issue with it, I thought open it up and clean the fan. I knew the problem was with the fan because I did not do any heavy tasks with this laptop which would need a lot of resources to compute and the fan didn't seem to push any air out from the air vents.
Now this is not my first time opening my laptop so it wasn't hard, I follow the disassembly video just to make sure I would not forget anything. I open it open clear the dusts stuck in the fan which was a lot. The vents were completely clear. I assembled the laptop again, turned it on, it was on for a couple of minutes and then it shuts down. The problem seemed to be the battery since it only lasts for 5 minutes. I connected the charger and turned it on again. In the middle of boot up it shuts down. The strange thing is fans are working full speed the whole time even though it's cold.
I am pretty sure I have connected everything. But of course there's something I have missed which causes this problem. I did not disassemble the heatsink from CPU. I only opened the fan.
What could be the problem
cpu shutdown fan cooling
There is probably a problem between the CPU and the heatsink (a bronzey coloured pipe that attaches to the CPU using some thermal paste or a thermal paste "pad"). This may have become detached or has "worn"/"dried up". By "worn" the conductive properties of the paste or pad change over a period of time due to the heat created by the CPU. The CPU notifies the motherboard that it needs more cooling -> the fans come on -> the CPU still says it needs more cooling -> the fans speed up -> the CPU still isn't being cooled -> it shuts itself off in panic.
– Kinnectus
Aug 7 '14 at 12:27
You may have cooked it - permanently.
– Ƭᴇcʜιᴇ007
Aug 7 '14 at 12:39
@BigChris As I said, the heatsink was not detached I just detached the fan from the heatsink but it still was connected to CPU. The other thing is, I do not think that the CPU has that much high temperature at 20 seconds into the boot up. The laptop was ice cold.
– Erfan
Aug 7 '14 at 12:44
@Ƭᴇcʜιᴇ007 How do you mean?
– Erfan
Aug 7 '14 at 12:44
Over time the paste or pad can dry up, regardless of whether it has been dismantled or not. Trust us, we've been doing this for years... You may not necessarily have done any permanent damage, but it is worth re-pasting or padding the thermal compound between the CPU and heatsink.
– Kinnectus
Aug 7 '14 at 12:54
|
show 1 more comment
Short version: When I turn on the laptop fans go full speed even though the the laptop is ice cold. After about 20 seconds it shuts down itself which I guess it's "thinking" CPU is overheating.
Long version: Recently I had an overheating issue with it, I thought open it up and clean the fan. I knew the problem was with the fan because I did not do any heavy tasks with this laptop which would need a lot of resources to compute and the fan didn't seem to push any air out from the air vents.
Now this is not my first time opening my laptop so it wasn't hard, I follow the disassembly video just to make sure I would not forget anything. I open it open clear the dusts stuck in the fan which was a lot. The vents were completely clear. I assembled the laptop again, turned it on, it was on for a couple of minutes and then it shuts down. The problem seemed to be the battery since it only lasts for 5 minutes. I connected the charger and turned it on again. In the middle of boot up it shuts down. The strange thing is fans are working full speed the whole time even though it's cold.
I am pretty sure I have connected everything. But of course there's something I have missed which causes this problem. I did not disassemble the heatsink from CPU. I only opened the fan.
What could be the problem
cpu shutdown fan cooling
Short version: When I turn on the laptop fans go full speed even though the the laptop is ice cold. After about 20 seconds it shuts down itself which I guess it's "thinking" CPU is overheating.
Long version: Recently I had an overheating issue with it, I thought open it up and clean the fan. I knew the problem was with the fan because I did not do any heavy tasks with this laptop which would need a lot of resources to compute and the fan didn't seem to push any air out from the air vents.
Now this is not my first time opening my laptop so it wasn't hard, I follow the disassembly video just to make sure I would not forget anything. I open it open clear the dusts stuck in the fan which was a lot. The vents were completely clear. I assembled the laptop again, turned it on, it was on for a couple of minutes and then it shuts down. The problem seemed to be the battery since it only lasts for 5 minutes. I connected the charger and turned it on again. In the middle of boot up it shuts down. The strange thing is fans are working full speed the whole time even though it's cold.
I am pretty sure I have connected everything. But of course there's something I have missed which causes this problem. I did not disassemble the heatsink from CPU. I only opened the fan.
What could be the problem
cpu shutdown fan cooling
cpu shutdown fan cooling
asked Aug 7 '14 at 12:16
ErfanErfan
111
111
There is probably a problem between the CPU and the heatsink (a bronzey coloured pipe that attaches to the CPU using some thermal paste or a thermal paste "pad"). This may have become detached or has "worn"/"dried up". By "worn" the conductive properties of the paste or pad change over a period of time due to the heat created by the CPU. The CPU notifies the motherboard that it needs more cooling -> the fans come on -> the CPU still says it needs more cooling -> the fans speed up -> the CPU still isn't being cooled -> it shuts itself off in panic.
– Kinnectus
Aug 7 '14 at 12:27
You may have cooked it - permanently.
– Ƭᴇcʜιᴇ007
Aug 7 '14 at 12:39
@BigChris As I said, the heatsink was not detached I just detached the fan from the heatsink but it still was connected to CPU. The other thing is, I do not think that the CPU has that much high temperature at 20 seconds into the boot up. The laptop was ice cold.
– Erfan
Aug 7 '14 at 12:44
@Ƭᴇcʜιᴇ007 How do you mean?
– Erfan
Aug 7 '14 at 12:44
Over time the paste or pad can dry up, regardless of whether it has been dismantled or not. Trust us, we've been doing this for years... You may not necessarily have done any permanent damage, but it is worth re-pasting or padding the thermal compound between the CPU and heatsink.
– Kinnectus
Aug 7 '14 at 12:54
|
show 1 more comment
There is probably a problem between the CPU and the heatsink (a bronzey coloured pipe that attaches to the CPU using some thermal paste or a thermal paste "pad"). This may have become detached or has "worn"/"dried up". By "worn" the conductive properties of the paste or pad change over a period of time due to the heat created by the CPU. The CPU notifies the motherboard that it needs more cooling -> the fans come on -> the CPU still says it needs more cooling -> the fans speed up -> the CPU still isn't being cooled -> it shuts itself off in panic.
– Kinnectus
Aug 7 '14 at 12:27
You may have cooked it - permanently.
– Ƭᴇcʜιᴇ007
Aug 7 '14 at 12:39
@BigChris As I said, the heatsink was not detached I just detached the fan from the heatsink but it still was connected to CPU. The other thing is, I do not think that the CPU has that much high temperature at 20 seconds into the boot up. The laptop was ice cold.
– Erfan
Aug 7 '14 at 12:44
@Ƭᴇcʜιᴇ007 How do you mean?
– Erfan
Aug 7 '14 at 12:44
Over time the paste or pad can dry up, regardless of whether it has been dismantled or not. Trust us, we've been doing this for years... You may not necessarily have done any permanent damage, but it is worth re-pasting or padding the thermal compound between the CPU and heatsink.
– Kinnectus
Aug 7 '14 at 12:54
There is probably a problem between the CPU and the heatsink (a bronzey coloured pipe that attaches to the CPU using some thermal paste or a thermal paste "pad"). This may have become detached or has "worn"/"dried up". By "worn" the conductive properties of the paste or pad change over a period of time due to the heat created by the CPU. The CPU notifies the motherboard that it needs more cooling -> the fans come on -> the CPU still says it needs more cooling -> the fans speed up -> the CPU still isn't being cooled -> it shuts itself off in panic.
– Kinnectus
Aug 7 '14 at 12:27
There is probably a problem between the CPU and the heatsink (a bronzey coloured pipe that attaches to the CPU using some thermal paste or a thermal paste "pad"). This may have become detached or has "worn"/"dried up". By "worn" the conductive properties of the paste or pad change over a period of time due to the heat created by the CPU. The CPU notifies the motherboard that it needs more cooling -> the fans come on -> the CPU still says it needs more cooling -> the fans speed up -> the CPU still isn't being cooled -> it shuts itself off in panic.
– Kinnectus
Aug 7 '14 at 12:27
You may have cooked it - permanently.
– Ƭᴇcʜιᴇ007
Aug 7 '14 at 12:39
You may have cooked it - permanently.
– Ƭᴇcʜιᴇ007
Aug 7 '14 at 12:39
@BigChris As I said, the heatsink was not detached I just detached the fan from the heatsink but it still was connected to CPU. The other thing is, I do not think that the CPU has that much high temperature at 20 seconds into the boot up. The laptop was ice cold.
– Erfan
Aug 7 '14 at 12:44
@BigChris As I said, the heatsink was not detached I just detached the fan from the heatsink but it still was connected to CPU. The other thing is, I do not think that the CPU has that much high temperature at 20 seconds into the boot up. The laptop was ice cold.
– Erfan
Aug 7 '14 at 12:44
@Ƭᴇcʜιᴇ007 How do you mean?
– Erfan
Aug 7 '14 at 12:44
@Ƭᴇcʜιᴇ007 How do you mean?
– Erfan
Aug 7 '14 at 12:44
Over time the paste or pad can dry up, regardless of whether it has been dismantled or not. Trust us, we've been doing this for years... You may not necessarily have done any permanent damage, but it is worth re-pasting or padding the thermal compound between the CPU and heatsink.
– Kinnectus
Aug 7 '14 at 12:54
Over time the paste or pad can dry up, regardless of whether it has been dismantled or not. Trust us, we've been doing this for years... You may not necessarily have done any permanent damage, but it is worth re-pasting or padding the thermal compound between the CPU and heatsink.
– Kinnectus
Aug 7 '14 at 12:54
|
show 1 more comment
1 Answer
1
active
oldest
votes
I opened up the laptop again. Problem was that the I had loosened up one of the four screws that connect heatsink to the CPU and forgot to tighten it up. This caused the fan go crazy and the CPU shut itself down in order to prevent overheating.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f793704%2flaptop-thinks-its-overheating-shuts-down-itself%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
I opened up the laptop again. Problem was that the I had loosened up one of the four screws that connect heatsink to the CPU and forgot to tighten it up. This caused the fan go crazy and the CPU shut itself down in order to prevent overheating.
add a comment |
I opened up the laptop again. Problem was that the I had loosened up one of the four screws that connect heatsink to the CPU and forgot to tighten it up. This caused the fan go crazy and the CPU shut itself down in order to prevent overheating.
add a comment |
I opened up the laptop again. Problem was that the I had loosened up one of the four screws that connect heatsink to the CPU and forgot to tighten it up. This caused the fan go crazy and the CPU shut itself down in order to prevent overheating.
I opened up the laptop again. Problem was that the I had loosened up one of the four screws that connect heatsink to the CPU and forgot to tighten it up. This caused the fan go crazy and the CPU shut itself down in order to prevent overheating.
answered Aug 8 '14 at 7:38
ErfanErfan
111
111
add a comment |
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f793704%2flaptop-thinks-its-overheating-shuts-down-itself%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
There is probably a problem between the CPU and the heatsink (a bronzey coloured pipe that attaches to the CPU using some thermal paste or a thermal paste "pad"). This may have become detached or has "worn"/"dried up". By "worn" the conductive properties of the paste or pad change over a period of time due to the heat created by the CPU. The CPU notifies the motherboard that it needs more cooling -> the fans come on -> the CPU still says it needs more cooling -> the fans speed up -> the CPU still isn't being cooled -> it shuts itself off in panic.
– Kinnectus
Aug 7 '14 at 12:27
You may have cooked it - permanently.
– Ƭᴇcʜιᴇ007
Aug 7 '14 at 12:39
@BigChris As I said, the heatsink was not detached I just detached the fan from the heatsink but it still was connected to CPU. The other thing is, I do not think that the CPU has that much high temperature at 20 seconds into the boot up. The laptop was ice cold.
– Erfan
Aug 7 '14 at 12:44
@Ƭᴇcʜιᴇ007 How do you mean?
– Erfan
Aug 7 '14 at 12:44
Over time the paste or pad can dry up, regardless of whether it has been dismantled or not. Trust us, we've been doing this for years... You may not necessarily have done any permanent damage, but it is worth re-pasting or padding the thermal compound between the CPU and heatsink.
– Kinnectus
Aug 7 '14 at 12:54