Can't get grub2 boot menu via COM2 port












1















I want to connect my "CentOS Linux release 7.6.1810 (Core)" device via COM2 port,then I modify '/etc/default/grub':



GRUB_TIMEOUT=5

GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"

GRUB_DEFAULT=saved

GRUB_DISABLE_SUBMENU=true

GRUB_TERMINAL_OUTPUT="serial"

GRUB_CMDLINE_LINUX="console=tty0 console=ttyS1,115200n8"

GRUB_DISABLE_RECOVERY="true"

GRUB_TERMINAL="serial console"

GRUB_SERIAL_COMMAND="115200n8 serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"


then run:



grub2-mkconfig -o /boot/grub2/grub.cfg


as the result I could only get the output after "boot menu", not including the grub2.



PS: I'm using COM2(ttyS1) not COM1(ttyS0)






centos7 grub serial







share|improve this question



























    1















    I want to connect my "CentOS Linux release 7.6.1810 (Core)" device via COM2 port,then I modify '/etc/default/grub':



    GRUB_TIMEOUT=5
    
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
    
GRUB_DEFAULT=saved
    
GRUB_DISABLE_SUBMENU=true
    
GRUB_TERMINAL_OUTPUT="serial"
    
GRUB_CMDLINE_LINUX="console=tty0 console=ttyS1,115200n8"
    
GRUB_DISABLE_RECOVERY="true"
    
GRUB_TERMINAL="serial console"
    
GRUB_SERIAL_COMMAND="115200n8 serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"


    then run:



    grub2-mkconfig -o /boot/grub2/grub.cfg


    as the result I could only get the output after "boot menu", not including the grub2.



    PS: I'm using COM2(ttyS1) not COM1(ttyS0)






    centos7 grub serial







    share|improve this question

























      1












      1








      1








      I want to connect my "CentOS Linux release 7.6.1810 (Core)" device via COM2 port,then I modify '/etc/default/grub':



      GRUB_TIMEOUT=5
      
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
      
GRUB_DEFAULT=saved
      
GRUB_DISABLE_SUBMENU=true
      
GRUB_TERMINAL_OUTPUT="serial"
      
GRUB_CMDLINE_LINUX="console=tty0 console=ttyS1,115200n8"
      
GRUB_DISABLE_RECOVERY="true"
      
GRUB_TERMINAL="serial console"
      
GRUB_SERIAL_COMMAND="115200n8 serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"


      then run:



      grub2-mkconfig -o /boot/grub2/grub.cfg


      as the result I could only get the output after "boot menu", not including the grub2.



      PS: I'm using COM2(ttyS1) not COM1(ttyS0)






      centos7 grub serial







      share|improve this question














      I want to connect my "CentOS Linux release 7.6.1810 (Core)" device via COM2 port,then I modify '/etc/default/grub':



      GRUB_TIMEOUT=5
      
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
      
GRUB_DEFAULT=saved
      
GRUB_DISABLE_SUBMENU=true
      
GRUB_TERMINAL_OUTPUT="serial"
      
GRUB_CMDLINE_LINUX="console=tty0 console=ttyS1,115200n8"
      
GRUB_DISABLE_RECOVERY="true"
      
GRUB_TERMINAL="serial console"
      
GRUB_SERIAL_COMMAND="115200n8 serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"


      then run:



      grub2-mkconfig -o /boot/grub2/grub.cfg


      as the result I could only get the output after "boot menu", not including the grub2.



      PS: I'm using COM2(ttyS1) not COM1(ttyS0)






      centos7 grub serial




      centos7 grub serial






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked 1 hour ago









      mrcomrco

      1094




      1094






















          2 Answers
          2






          active

          oldest

          votes


















          2














          Your GRUB_SERIAL_COMMAND is specifying to use serial port 0, but you specifically said you wanted to use serial port 1.



          You specified --unit=0, which means serial port 0.



          You should instead use --unit=1, to use serial port 1.




          Also, your serial command begins with 115200n8 which is not valid and should not be present. It should instead start with serial.






          share|improve this answer
























          • I truly appreciate your timely help.

            – mrco
            1 hour ago



















          1














          If you only need the second one, simply change the --unit=0 into --unit=1.




          The serial unit 0 is usually called ‘COM1’, so, if you want to use COM2, you must specify ‘--unit=1’ instead. -- grub manual







          share|improve this answer
























          • I'm too young too simple,,,it works!!

            – mrco
            1 hour ago











          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "2"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f949919%2fcant-get-grub2-boot-menu-via-com2-port%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          2 Answers
          2






          active

          oldest

          votes








          2 Answers
          2






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          2














          Your GRUB_SERIAL_COMMAND is specifying to use serial port 0, but you specifically said you wanted to use serial port 1.



          You specified --unit=0, which means serial port 0.



          You should instead use --unit=1, to use serial port 1.




          Also, your serial command begins with 115200n8 which is not valid and should not be present. It should instead start with serial.






          share|improve this answer
























          • I truly appreciate your timely help.

            – mrco
            1 hour ago
















          2














          Your GRUB_SERIAL_COMMAND is specifying to use serial port 0, but you specifically said you wanted to use serial port 1.



          You specified --unit=0, which means serial port 0.



          You should instead use --unit=1, to use serial port 1.




          Also, your serial command begins with 115200n8 which is not valid and should not be present. It should instead start with serial.






          share|improve this answer
























          • I truly appreciate your timely help.

            – mrco
            1 hour ago














          2












          2








          2







          Your GRUB_SERIAL_COMMAND is specifying to use serial port 0, but you specifically said you wanted to use serial port 1.



          You specified --unit=0, which means serial port 0.



          You should instead use --unit=1, to use serial port 1.




          Also, your serial command begins with 115200n8 which is not valid and should not be present. It should instead start with serial.






          share|improve this answer













          Your GRUB_SERIAL_COMMAND is specifying to use serial port 0, but you specifically said you wanted to use serial port 1.



          You specified --unit=0, which means serial port 0.



          You should instead use --unit=1, to use serial port 1.




          Also, your serial command begins with 115200n8 which is not valid and should not be present. It should instead start with serial.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered 1 hour ago









          Michael Hampton♦Michael Hampton

          166k26305625




          166k26305625













          • I truly appreciate your timely help.

            – mrco
            1 hour ago



















          • I truly appreciate your timely help.

            – mrco
            1 hour ago

















          I truly appreciate your timely help.

          – mrco
          1 hour ago





          I truly appreciate your timely help.

          – mrco
          1 hour ago













          1














          If you only need the second one, simply change the --unit=0 into --unit=1.




          The serial unit 0 is usually called ‘COM1’, so, if you want to use COM2, you must specify ‘--unit=1’ instead. -- grub manual







          share|improve this answer
























          • I'm too young too simple,,,it works!!

            – mrco
            1 hour ago
















          1














          If you only need the second one, simply change the --unit=0 into --unit=1.




          The serial unit 0 is usually called ‘COM1’, so, if you want to use COM2, you must specify ‘--unit=1’ instead. -- grub manual







          share|improve this answer
























          • I'm too young too simple,,,it works!!

            – mrco
            1 hour ago














          1












          1








          1







          If you only need the second one, simply change the --unit=0 into --unit=1.




          The serial unit 0 is usually called ‘COM1’, so, if you want to use COM2, you must specify ‘--unit=1’ instead. -- grub manual







          share|improve this answer













          If you only need the second one, simply change the --unit=0 into --unit=1.




          The serial unit 0 is usually called ‘COM1’, so, if you want to use COM2, you must specify ‘--unit=1’ instead. -- grub manual








          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered 1 hour ago









          anxanx

          1,4541719




          1,4541719













          • I'm too young too simple,,,it works!!

            – mrco
            1 hour ago



















          • I'm too young too simple,,,it works!!

            – mrco
            1 hour ago

















          I'm too young too simple,,,it works!!

          – mrco
          1 hour ago





          I'm too young too simple,,,it works!!

          – mrco
          1 hour ago


















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Server Fault!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid …



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fserverfault.com%2fquestions%2f949919%2fcant-get-grub2-boot-menu-via-com2-port%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          -

          Popular posts from this blog

          How to make a Squid Proxy server?

          Image
          1 I want to set up squid proxy server for monitoring user activity in a network and Internet Web URL filtering for user. I also want to configure the user login, user log, user access group, and block unwanted web sites in my network. Please help me and guide me the full process to do this. server proxy squid share | improve this question edited Jul 31 '12 at 14:45 Jorge Castro 37.1k 107 422 617 asked Jul 31 '12 at 5:16 Goivind Tiwari Goivind Tiwari ...
          Read more

          Is this a new Fibonacci Identity?

          Image
          6 1 $begingroup$ I have found the following Fibonacci Identity (and proved it). If $F_n$ denotes the nth Fibonacci Number, we have the following identity begin{equation} F_{n-r+h}F_{n+k+g+1} - F_{n-r+g}F_{n+k+h+1} = (-1)^{n+r+h+1} F_{g-h}F_{k+r+1} end{equation} where $F_1 = F_2 = 1$ , $r leq n$ , $h leq g$ , and $n, g, k in mathbb{N}$ . It is not too hard to show that this identity subsumes Cassini's Identity, Catalan's Identity, Vajda's Idenity, and d'Ocagne's identity to name a few. I have done a pretty thorough literature review, and I have not found anything like this, but I am still wondering if anyone has seen this identity before? I found this by accident after noticing some patterns in some analysis work I was doing, so if this is already known I would be curious to see w...
          Read more

          19世紀

          Image
          この記事は検証可能な参考文献や出典が全く示されていないか、不十分です。 出典を追加して記事の信頼性向上にご協力ください。 （ 2012年3月 ） 千年紀: 2千年紀 世紀: 18世紀 - 19世紀 - 20世紀 十年紀: 1800年代 1810年代 1820年代 1830年代 1840年代 1850年代 1860年代 1870年代 1880年代 1890年代 19世紀に君臨した大英帝国。 19世紀 （じゅうきゅうせいき）は、西暦1801年から西暦1900年までの100年間を指す世紀。 目次 1 19世紀の歴史 1.1 国民国家の成立 1.2 帝国主義の興隆 1.3 列強の植民地争奪戦 2 できごと 2.1 1800年代 2.2 1810年代 2.3 1820年代 2.4 1830年代 2.5 1840年代 2.6 1850年代 2.7 1860年代 2.8 1870年代 2.9 1880年代 2.10 1890年代 2.11 1900年代 3 文化 3.1 文学 3.2 音楽 3.3 思想 3.4 科学 3.5 技術 4 人物 4.1 ヨーロッパ 4.1.1 政治家・王族 4.1.1.1 フランス 4.1.1.2 オーストリア＝ハンガリー 4.1.1.3 ロシア 4.1.1.4 イギリス 4.1.1.5 ドイツ（プロイセンほかドイツ領邦を含む） 4.1.1.6 北欧 4.1.1.7 イタリア 4.1.1.8 スペイン 4.1.1.9 ベルギー 4.1.1.10 ギリシア 4.1.2 軍人 4.1.3 実業家 4.1.4 科学と技術 4.1.5 思想と哲学・人文諸学 4.1.6 宗教 4.1.7 文学 4.1.8 美術 4.1.9 音楽 4.1.10 社会事業家 4.1.11 探検家・旅行家 4.1.12 料...
          Read more