Ubuntu Server 18.04 LVM out of space with improper default partitioning
I installed Ubuntu Server 18.04 with the LVM option and left the default partition setup. Now my main drive only has 4GB in a 1TB hard drive. How can I fix this without starting from scratch?
Results of df -h
:
partitioning 18.04 lvm
New contributor
add a comment |
I installed Ubuntu Server 18.04 with the LVM option and left the default partition setup. Now my main drive only has 4GB in a 1TB hard drive. How can I fix this without starting from scratch?
Results of df -h
:
partitioning 18.04 lvm
New contributor
add a comment |
I installed Ubuntu Server 18.04 with the LVM option and left the default partition setup. Now my main drive only has 4GB in a 1TB hard drive. How can I fix this without starting from scratch?
Results of df -h
:
partitioning 18.04 lvm
New contributor
I installed Ubuntu Server 18.04 with the LVM option and left the default partition setup. Now my main drive only has 4GB in a 1TB hard drive. How can I fix this without starting from scratch?
Results of df -h
:
partitioning 18.04 lvm
partitioning 18.04 lvm
New contributor
New contributor
edited 13 hours ago
New contributor
asked yesterday
GEC
61
61
New contributor
New contributor
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
Consider installing KVPM to get yourself a GUI and a better understanding on your situation/layout. Within the program you can do a lot of very powerful things.
Thank you. I get the following error when running kvpm: qt.qpa.screen: QXcbConnection: Could not connect to display Could not connect to any X display.
– GEC
15 hours ago
this may help.
– MeSo2
15 hours ago
I am not using ipython, I have a monitor connected to the server and was looking at it when I got the error.
– GEC
14 hours ago
I dont have a GUI installed, does KVPM need me to install one or does it have one itself?
– GEC
14 hours ago
GUI (Graphic User Interface) is what KVPM provides. I suggest to boot from a USB sick that has Ubuntu on it and install KVPM onto the stick, and run it from the stick. It may help you get a better understanding what is going on with your hard drive. Did you do an Update or a fresh install?
– MeSo2
13 hours ago
|
show 4 more comments
It appears that you need to extend your Logical Volume.
It can be a bit tricky but if you understand that there are 3 parts, it'll be much easier.
Physical Volume (PV) => The physical space on a drive.
Volume Group (VG) => An abstracted amount of drive space that can be split between multiple drives/devices.
Logical Volume (LV) => The space that ubuntu "sees"
You'll need to extend your VG all the way across your 1TB Drive (or extend however much you want), then extend the Logical Volume group to take up that space.
Technet has a nice writeup that (if you follow carefully) you'll be able to follow and extend your drive.
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
GEC is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1106795%2fubuntu-server-18-04-lvm-out-of-space-with-improper-default-partitioning%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
Consider installing KVPM to get yourself a GUI and a better understanding on your situation/layout. Within the program you can do a lot of very powerful things.
Thank you. I get the following error when running kvpm: qt.qpa.screen: QXcbConnection: Could not connect to display Could not connect to any X display.
– GEC
15 hours ago
this may help.
– MeSo2
15 hours ago
I am not using ipython, I have a monitor connected to the server and was looking at it when I got the error.
– GEC
14 hours ago
I dont have a GUI installed, does KVPM need me to install one or does it have one itself?
– GEC
14 hours ago
GUI (Graphic User Interface) is what KVPM provides. I suggest to boot from a USB sick that has Ubuntu on it and install KVPM onto the stick, and run it from the stick. It may help you get a better understanding what is going on with your hard drive. Did you do an Update or a fresh install?
– MeSo2
13 hours ago
|
show 4 more comments
Consider installing KVPM to get yourself a GUI and a better understanding on your situation/layout. Within the program you can do a lot of very powerful things.
Thank you. I get the following error when running kvpm: qt.qpa.screen: QXcbConnection: Could not connect to display Could not connect to any X display.
– GEC
15 hours ago
this may help.
– MeSo2
15 hours ago
I am not using ipython, I have a monitor connected to the server and was looking at it when I got the error.
– GEC
14 hours ago
I dont have a GUI installed, does KVPM need me to install one or does it have one itself?
– GEC
14 hours ago
GUI (Graphic User Interface) is what KVPM provides. I suggest to boot from a USB sick that has Ubuntu on it and install KVPM onto the stick, and run it from the stick. It may help you get a better understanding what is going on with your hard drive. Did you do an Update or a fresh install?
– MeSo2
13 hours ago
|
show 4 more comments
Consider installing KVPM to get yourself a GUI and a better understanding on your situation/layout. Within the program you can do a lot of very powerful things.
Consider installing KVPM to get yourself a GUI and a better understanding on your situation/layout. Within the program you can do a lot of very powerful things.
answered yesterday
MeSo2
48112
48112
Thank you. I get the following error when running kvpm: qt.qpa.screen: QXcbConnection: Could not connect to display Could not connect to any X display.
– GEC
15 hours ago
this may help.
– MeSo2
15 hours ago
I am not using ipython, I have a monitor connected to the server and was looking at it when I got the error.
– GEC
14 hours ago
I dont have a GUI installed, does KVPM need me to install one or does it have one itself?
– GEC
14 hours ago
GUI (Graphic User Interface) is what KVPM provides. I suggest to boot from a USB sick that has Ubuntu on it and install KVPM onto the stick, and run it from the stick. It may help you get a better understanding what is going on with your hard drive. Did you do an Update or a fresh install?
– MeSo2
13 hours ago
|
show 4 more comments
Thank you. I get the following error when running kvpm: qt.qpa.screen: QXcbConnection: Could not connect to display Could not connect to any X display.
– GEC
15 hours ago
this may help.
– MeSo2
15 hours ago
I am not using ipython, I have a monitor connected to the server and was looking at it when I got the error.
– GEC
14 hours ago
I dont have a GUI installed, does KVPM need me to install one or does it have one itself?
– GEC
14 hours ago
GUI (Graphic User Interface) is what KVPM provides. I suggest to boot from a USB sick that has Ubuntu on it and install KVPM onto the stick, and run it from the stick. It may help you get a better understanding what is going on with your hard drive. Did you do an Update or a fresh install?
– MeSo2
13 hours ago
Thank you. I get the following error when running kvpm: qt.qpa.screen: QXcbConnection: Could not connect to display Could not connect to any X display.
– GEC
15 hours ago
Thank you. I get the following error when running kvpm: qt.qpa.screen: QXcbConnection: Could not connect to display Could not connect to any X display.
– GEC
15 hours ago
this may help.
– MeSo2
15 hours ago
this may help.
– MeSo2
15 hours ago
I am not using ipython, I have a monitor connected to the server and was looking at it when I got the error.
– GEC
14 hours ago
I am not using ipython, I have a monitor connected to the server and was looking at it when I got the error.
– GEC
14 hours ago
I dont have a GUI installed, does KVPM need me to install one or does it have one itself?
– GEC
14 hours ago
I dont have a GUI installed, does KVPM need me to install one or does it have one itself?
– GEC
14 hours ago
GUI (Graphic User Interface) is what KVPM provides. I suggest to boot from a USB sick that has Ubuntu on it and install KVPM onto the stick, and run it from the stick. It may help you get a better understanding what is going on with your hard drive. Did you do an Update or a fresh install?
– MeSo2
13 hours ago
GUI (Graphic User Interface) is what KVPM provides. I suggest to boot from a USB sick that has Ubuntu on it and install KVPM onto the stick, and run it from the stick. It may help you get a better understanding what is going on with your hard drive. Did you do an Update or a fresh install?
– MeSo2
13 hours ago
|
show 4 more comments
It appears that you need to extend your Logical Volume.
It can be a bit tricky but if you understand that there are 3 parts, it'll be much easier.
Physical Volume (PV) => The physical space on a drive.
Volume Group (VG) => An abstracted amount of drive space that can be split between multiple drives/devices.
Logical Volume (LV) => The space that ubuntu "sees"
You'll need to extend your VG all the way across your 1TB Drive (or extend however much you want), then extend the Logical Volume group to take up that space.
Technet has a nice writeup that (if you follow carefully) you'll be able to follow and extend your drive.
add a comment |
It appears that you need to extend your Logical Volume.
It can be a bit tricky but if you understand that there are 3 parts, it'll be much easier.
Physical Volume (PV) => The physical space on a drive.
Volume Group (VG) => An abstracted amount of drive space that can be split between multiple drives/devices.
Logical Volume (LV) => The space that ubuntu "sees"
You'll need to extend your VG all the way across your 1TB Drive (or extend however much you want), then extend the Logical Volume group to take up that space.
Technet has a nice writeup that (if you follow carefully) you'll be able to follow and extend your drive.
add a comment |
It appears that you need to extend your Logical Volume.
It can be a bit tricky but if you understand that there are 3 parts, it'll be much easier.
Physical Volume (PV) => The physical space on a drive.
Volume Group (VG) => An abstracted amount of drive space that can be split between multiple drives/devices.
Logical Volume (LV) => The space that ubuntu "sees"
You'll need to extend your VG all the way across your 1TB Drive (or extend however much you want), then extend the Logical Volume group to take up that space.
Technet has a nice writeup that (if you follow carefully) you'll be able to follow and extend your drive.
It appears that you need to extend your Logical Volume.
It can be a bit tricky but if you understand that there are 3 parts, it'll be much easier.
Physical Volume (PV) => The physical space on a drive.
Volume Group (VG) => An abstracted amount of drive space that can be split between multiple drives/devices.
Logical Volume (LV) => The space that ubuntu "sees"
You'll need to extend your VG all the way across your 1TB Drive (or extend however much you want), then extend the Logical Volume group to take up that space.
Technet has a nice writeup that (if you follow carefully) you'll be able to follow and extend your drive.
answered 13 hours ago
Andy
1011
1011
add a comment |
add a comment |
GEC is a new contributor. Be nice, and check out our Code of Conduct.
GEC is a new contributor. Be nice, and check out our Code of Conduct.
GEC is a new contributor. Be nice, and check out our Code of Conduct.
GEC is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1106795%2fubuntu-server-18-04-lvm-out-of-space-with-improper-default-partitioning%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown