What size rim is OK?
1
I have a 700x35c rear rim, it's bent pretty bad, but only can find 700x38c rims, is that ok to use? Or should I keep hunting for the same size rim?
mountain-bike
edited 12 hours ago
Argenti Apparatus
36.6k23891
asked 12 hours ago
DavidDavid
62
New contributor
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
1
I have a 700x35c rear rim, it's bent pretty bad, but only can find 700x38c rims, is that ok to use? Or should I keep hunting for the same size rim?
mountain-bike
edited 12 hours ago
Argenti Apparatus
36.6k23891
asked 12 hours ago
DavidDavid
62
New contributor
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
2
Unless there's something special about the hub and spokes you already have, and you have the skill required to build a wheel, you probably just want to buy a new wheel. (Or should we read "xyz rim" as "wheel with xyz rim"?)
– David Richerby
12 hours ago
2
Unless the hub in the busted wheel is a higher-end one, it's almost certainly more cost-effective to just buy a new wheel. It's unfortunate, but the lack of economies of scale for labor and the shipping of parts tends to make buying a whole new wheel cheaper than getting all the parts and then paying someone to rebuild the wheel. There's not much difference between shipping one rim and shipping one complete wheel. Even if you do the rebuild yourself, just the parts and the shipping might be more than an entire new wheel. (Been there, done that...)
– Andrew Henle
11 hours ago
1
What size tyre will you be fitting?
– Swifty
10 hours ago
1
35 and 38 are huge for rim and coincidentally common tire sizes. Are you sure about the numbers?
– ojs
8 hours ago
add a comment |
1
1
1
I have a 700x35c rear rim, it's bent pretty bad, but only can find 700x38c rims, is that ok to use? Or should I keep hunting for the same size rim?
mountain-bike
edited 12 hours ago
Argenti Apparatus
36.6k23891
asked 12 hours ago
DavidDavid
62
New contributor
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I have a 700x35c rear rim, it's bent pretty bad, but only can find 700x38c rims, is that ok to use? Or should I keep hunting for the same size rim?
mountain-bike
mountain-bike
edited 12 hours ago
Argenti Apparatus
36.6k23891
asked 12 hours ago
DavidDavid
62
New contributor
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 12 hours ago
Argenti Apparatus
36.6k23891
asked 12 hours ago
DavidDavid
62
New contributor
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 12 hours ago
Argenti Apparatus
36.6k23891
edited 12 hours ago
Argenti Apparatus
36.6k23891
edited 12 hours ago
Argenti Apparatus
36.6k23891
36.6k23891
asked 12 hours ago
DavidDavid
62
New contributor
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 12 hours ago
DavidDavid
62
asked 12 hours ago
DavidDavid
62
62
New contributor
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
David is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
2
Unless there's something special about the hub and spokes you already have, and you have the skill required to build a wheel, you probably just want to buy a new wheel. (Or should we read "xyz rim" as "wheel with xyz rim"?)
– David Richerby
12 hours ago
2
Unless the hub in the busted wheel is a higher-end one, it's almost certainly more cost-effective to just buy a new wheel. It's unfortunate, but the lack of economies of scale for labor and the shipping of parts tends to make buying a whole new wheel cheaper than getting all the parts and then paying someone to rebuild the wheel. There's not much difference between shipping one rim and shipping one complete wheel. Even if you do the rebuild yourself, just the parts and the shipping might be more than an entire new wheel. (Been there, done that...)
– Andrew Henle
11 hours ago
1
What size tyre will you be fitting?
– Swifty
10 hours ago
1
35 and 38 are huge for rim and coincidentally common tire sizes. Are you sure about the numbers?
– ojs
8 hours ago
add a comment |
2
Unless there's something special about the hub and spokes you already have, and you have the skill required to build a wheel, you probably just want to buy a new wheel. (Or should we read "xyz rim" as "wheel with xyz rim"?)
– David Richerby
12 hours ago
2
Unless the hub in the busted wheel is a higher-end one, it's almost certainly more cost-effective to just buy a new wheel. It's unfortunate, but the lack of economies of scale for labor and the shipping of parts tends to make buying a whole new wheel cheaper than getting all the parts and then paying someone to rebuild the wheel. There's not much difference between shipping one rim and shipping one complete wheel. Even if you do the rebuild yourself, just the parts and the shipping might be more than an entire new wheel. (Been there, done that...)
– Andrew Henle
11 hours ago
1
What size tyre will you be fitting?
– Swifty
10 hours ago
1
35 and 38 are huge for rim and coincidentally common tire sizes. Are you sure about the numbers?
– ojs
8 hours ago
2
2
Unless there's something special about the hub and spokes you already have, and you have the skill required to build a wheel, you probably just want to buy a new wheel. (Or should we read "xyz rim" as "wheel with xyz rim"?)
– David Richerby
12 hours ago
Unless there's something special about the hub and spokes you already have, and you have the skill required to build a wheel, you probably just want to buy a new wheel. (Or should we read "xyz rim" as "wheel with xyz rim"?)
– David Richerby
12 hours ago
2
2
Unless the hub in the busted wheel is a higher-end one, it's almost certainly more cost-effective to just buy a new wheel. It's unfortunate, but the lack of economies of scale for labor and the shipping of parts tends to make buying a whole new wheel cheaper than getting all the parts and then paying someone to rebuild the wheel. There's not much difference between shipping one rim and shipping one complete wheel. Even if you do the rebuild yourself, just the parts and the shipping might be more than an entire new wheel. (Been there, done that...)
– Andrew Henle
11 hours ago
Unless the hub in the busted wheel is a higher-end one, it's almost certainly more cost-effective to just buy a new wheel. It's unfortunate, but the lack of economies of scale for labor and the shipping of parts tends to make buying a whole new wheel cheaper than getting all the parts and then paying someone to rebuild the wheel. There's not much difference between shipping one rim and shipping one complete wheel. Even if you do the rebuild yourself, just the parts and the shipping might be more than an entire new wheel. (Been there, done that...)
– Andrew Henle
11 hours ago
1
1
What size tyre will you be fitting?
– Swifty
10 hours ago
What size tyre will you be fitting?
– Swifty
10 hours ago
1
1
35 and 38 are huge for rim and coincidentally common tire sizes. Are you sure about the numbers?
– ojs
8 hours ago
35 and 38 are huge for rim and coincidentally common tire sizes. Are you sure about the numbers?
– ojs
8 hours ago
add a comment |
2 Answers
2
active
oldest
votes
2
If the width of tires you want to run are a little narrow for a 35mm rim, a 38mm rim could cause problems, otherwise there are no issues I can think of.
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
36.6k23891
add a comment |
1
A 700x38 rim will be OK. Be aware that your new rim needs to be drilled for the same number of spokes as your old rim, and your existing spokes might not fit it.
answered 12 hours ago
Adam RiceAdam Rice
5,9221534
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "126"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
David is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f60022%2fwhat-size-rim-is-ok%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
2
If the width of tires you want to run are a little narrow for a 35mm rim, a 38mm rim could cause problems, otherwise there are no issues I can think of.
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
36.6k23891
add a comment |
2
If the width of tires you want to run are a little narrow for a 35mm rim, a 38mm rim could cause problems, otherwise there are no issues I can think of.
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
36.6k23891
add a comment |
2
2
2
If the width of tires you want to run are a little narrow for a 35mm rim, a 38mm rim could cause problems, otherwise there are no issues I can think of.
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
36.6k23891
If the width of tires you want to run are a little narrow for a 35mm rim, a 38mm rim could cause problems, otherwise there are no issues I can think of.
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
36.6k23891
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
36.6k23891
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
36.6k23891
answered 11 hours ago
Argenti ApparatusArgenti Apparatus
36.6k23891
36.6k23891
add a comment |
add a comment |
1
A 700x38 rim will be OK. Be aware that your new rim needs to be drilled for the same number of spokes as your old rim, and your existing spokes might not fit it.
answered 12 hours ago
Adam RiceAdam Rice
5,9221534
add a comment |
1
A 700x38 rim will be OK. Be aware that your new rim needs to be drilled for the same number of spokes as your old rim, and your existing spokes might not fit it.
answered 12 hours ago
Adam RiceAdam Rice
5,9221534
add a comment |
1
1
1
A 700x38 rim will be OK. Be aware that your new rim needs to be drilled for the same number of spokes as your old rim, and your existing spokes might not fit it.
answered 12 hours ago
Adam RiceAdam Rice
5,9221534
A 700x38 rim will be OK. Be aware that your new rim needs to be drilled for the same number of spokes as your old rim, and your existing spokes might not fit it.
answered 12 hours ago
Adam RiceAdam Rice
5,9221534
answered 12 hours ago
Adam RiceAdam Rice
5,9221534
answered 12 hours ago
Adam RiceAdam Rice
5,9221534
answered 12 hours ago
Adam RiceAdam Rice
5,9221534
5,9221534
add a comment |
add a comment |
David is a new contributor. Be nice, and check out our Code of Conduct.
draft saved
draft discarded
David is a new contributor. Be nice, and check out our Code of Conduct.
David is a new contributor. Be nice, and check out our Code of Conduct.
David is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Bicycles Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
draft saved
draft discarded
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f60022%2fwhat-size-rim-is-ok%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
2
Unless there's something special about the hub and spokes you already have, and you have the skill required to build a wheel, you probably just want to buy a new wheel. (Or should we read "xyz rim" as "wheel with xyz rim"?)
– David Richerby
12 hours ago
2
Unless the hub in the busted wheel is a higher-end one, it's almost certainly more cost-effective to just buy a new wheel. It's unfortunate, but the lack of economies of scale for labor and the shipping of parts tends to make buying a whole new wheel cheaper than getting all the parts and then paying someone to rebuild the wheel. There's not much difference between shipping one rim and shipping one complete wheel. Even if you do the rebuild yourself, just the parts and the shipping might be more than an entire new wheel. (Been there, done that...)
– Andrew Henle
11 hours ago
1
What size tyre will you be fitting?
– Swifty
10 hours ago
1
35 and 38 are huge for rim and coincidentally common tire sizes. Are you sure about the numbers?
– ojs
8 hours ago